Lecoht VT332000-BN 3 Light Vanity Light Instruction Manual
- June 28, 2024
- Lecoht
Table of Contents
Lecoht VT332000-BN 3 Light Vanity Light
Specifications
- Model: VT332000-BN
- Size: L 20.2 x W 6 x H 9 (inch)
- Bulb Base: E26
- Max Power: 60W per bulb
- Voltage: 120V AC
- Dimmable: Yes
Product Usage Instructions:
Installation Steps
- Install the mounting plate to the junction box with 2 screws.
- Connect the light’s white wire to the supply circuit’s neutral wire, black wire to the live wire, and ground wire to the ground wire. Secure each wire pair with a wire nut.
- Neatly place all wires into the junction box, align and place the fixture base onto the mounting studs.
- Install a compatible bulb (not included) on the E26 base. Max 60W per bulb. Recommended bulb types include A19, incandescent, LED, self-ballast, or CFL bulbs.
- Turn on the power to activate the fixture.
Safety Warnings
- Risk of Personal Injury: Read and follow all installation instructions carefully.
- Ensure supply voltage matches the rated product voltage of 120V 60Hz.
- Always wear necessary safety equipment during handling and installation to prevent injuries.
- Consult with a qualified electrician to verify correct branch circuit conductor usage to prevent fire risks.
- Product must be installed by a professional familiar with installation codes and product operation to prevent electrical shock hazards.
FAQ:
Q: Is the bulb included with the product?
A: No, the bulb is not included. You will need to purchase a compatible bulb
separately.
Light Vanity Light
- Opal Glass Lampshade
- Metal in Brushed Nickel
- 3*E26 Light Bulb ( Bulb not Included）
- Light Facing UP/Down
VT332000-BN Model- Size (inch)
- L 20.2″ x W 6″ x H 9″
- Bulb Base E26
- Max Power
- Max 60W/bulb 120V AC Voltage
Technical support available at Monica@wayspride.com
LIMITED ONE YEAR WARRANTY
If within one (1) year from the date of purchase, the product fails due to a
defect in material or workmanship, WaysPride LLC (Genesis Lighting) will
repair or replace it free of charge. WaysPride LLC will not be liable for
incidental or consequential damages to purchases, or any other party.
For any loss, damage, injury or expense of any kind or nature caused directly
or indirectly by the product or the failure of the product to operate
properly.
Warranty service is available by mailing postage prepaid to:
WaysPride LLC. 730 Dawson DR KH0158, Newark, Delaware, 19713 USA
A valid copy of the original invoice and return merchandise authorization
(RMA) are required for all warranty services.
INSTALLATION STEPS
- Install the mounting plate to the junction box with 2 screws.
- Connect the light’s white wire to the supply circuit’s neutral wire, black wire connect to supply circuit’s live wire, ground wire connect to the supply circuit’s ground wire. Secure each wire pair with a wire nut.
- Neatly place all the wires into the junction box, align and place the fixture base onto the mounting studs.
- Install bulb (not Included) on E26 base. Max 60W/bulb, recommend A19 bulb, incandescent bulb, LED bulb, self-ballast bulb or CFL bulb.
- Turn on the power to activate the fixture.
WARNING :
RISK OF PERSONAL INJURY PLEASE READ THESE INSTRUCTIONS CAREFULLY. FOLLOW ALL
INSTALLATION INSTRUCTIONS AND OBSERVE ALL WARNINGS.
- Make sure the “supply” voltage corresponds to the “rated” product voltage 120V 60Hz. Retain these instructions. Note: If you are an installer, please give these instructions to the property owner for future reference.
- Risk of injury: Always wear the necessary safety equipment to prevent injuries while opening, handling, installing, and maintaining this product.
- Risk of Fire: Always consult with a qualified electrician to ensure the correct branch circuit conductor is utilized.
- Risk of electrical shock: This product must be installed in accordance with the applicable installation code by a professional familiar with the construction and operation of the product. The professional should also be aware of, and understand, the hazards involved with the installation of this product.