M84_PAD_QSG Redmi Pad SE User Guide
- June 27, 2024
- Mi
Table of Contents
Redmi Pad SE
Quick Start Guide
M84_PAD_QSG Redmi Pad SE
Thank you for choosing Redmi Pad SE
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide
MIUI
Redmi Pad SE comes pre-installed with MIUI, our customized Android-based OS
which provides frequent updates and user-friendly features based on
suggestions from over 200 million active users worldwide. For more
information, please visit en.miui.com
WEEE
Special precautions must be taken to safely dispose of this product. This
marking indicates that this product may not be discarded with other household
waste in the EU.
To prevent harm to the environment or human health from inappropriate waste
disposal, and to promote sustainable reuse of material resources, please
recycle responsibly.
To safely recycle your device, please use return and collection systems or
contact the retailer where the device was originally purchased.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Additional safety information and precautions can be accessed at the following
link: www.mi.com/en/certification
Important Safety Information
Read all safety information below before using your device:
-
Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
-
Use only authorized accessories which are compatible with your device.
-
This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
-
If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
-
Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
-
After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
-
The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
-
Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
– Do not short circuit the battery, as this may cause overheating, burns, or other injury.
– Do not place the battery in a high-temperature environment.
– Overheating may cause explosion.
– Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
– Do not burn the battery, as this may cause fire or explosion.
– If the battery appears deformed or damaged, stop using it immediately. -
User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
-
Keep your device dry.
-
Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
-
Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
-
For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Safety Precautions
- Observe all applicable laws and rules restricting use of tablet in specific situations and environments.
- Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your tablet or other radio equipment. Turn off your tablet or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
- Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your tablet may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or other similar devices.
- Observe all aircraft safety regulations and turn off your tablet on board aircraft when required.
- When driving a vehicle, use your tablet in accordance with relevant traffic laws and regulations.
- To avoid being struck by lightning, do not use your tablet outdoors during thunderstorms.
- Do not use your tablet in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.
Security Statement
Please update your tablet’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this Tablet with
Bluetooth and Wi-Fi 23073RPBFG is in compliance with the essential
requirements and other relevant provisions of the RE Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized 10-gram SAR for trunk,
limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands.
When attaching the device near the body, a belt clip or holster should be used
which does not contain metallic components. RF exposure compliance was not
tested or certified with any accessory containing metal worn on the body, and
use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Body: 0.974 W/Kg (0 mm distance).
Legal Information
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in the 5250 to
5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,
IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR
This device is restricted to indoor use only when operating in the 5150 to
5350MHz in Hong Kong.
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other
features as ratified in IEEE Standard 802.11 specifications) may vary based on
regional availability and local network support. The function may be added via
OTA when and where applicable.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a
radius of 20 km from the centre of Ny-Ålesund.
Please ensure the used power adapters are compliant with applicable country
regulations and international and regional safety standards..
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and maximum
radio-frequency power:
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725
MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
UK Regulations
Regulations 2017 (SI 2017/1206)
Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this Tablet with
Bluetooth and Wi-Fi 23073RPBFG is in compliance with the essential
requirements and other relevant provisions of the UK Radio Equipment
Regulations 2017 (SI 2017/1206). The full text of the UK declaration of
conformity is available at the following internet address:
www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized 10-gram SAR for trunk,
limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands.
When attaching the device near the body, a belt clip or holster should be used
which does not contain metallic components. RF exposure compliance was not
tested or certified with any accessory containing metal worn on the body, and
use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Body: 0.974 W/Kg (0 mm distance).
Legal Information
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in the 5250 to
5350 MHz frequency range in :
This device is restricted to indoor use only when operating in the 5150 to
5350MHz in Hong Kong.
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other
features as ratified in IEEE Standard 802.11 specifications) may vary based on
regional availability and local network support. The function may be added via
OTA when and where applicable.
Please ensure the used power adapters are compliant with applicable country
regulations and international and regional safety standards.
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and maximum
radio-frequency power:
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725
MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About tablet > Certification, or open
Settings and type “Certification” into the search bar
Model: 23073RPBFG
2307 indicates that this product will be launched after 202307.
Model: MDY-09-EY/MDY-14-EZ
More Adapter information, visit our offfcial website:
www.mi.com/global/service/userguide
Disclaimer
This quick start guide is published by Xiaomi or its local affiliated company.
Improvements and changes to this guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or
equipment, may be made by Xiaomi at any time and without notice. Such changes
will, however, be incorporated into new online editions of the quick start
guide (please see details at
www.mi.com/global/service/userguide
).
All illustrations are for illustration purposes only and may not accurately
depict the actual device.
Manufacturer’s Authorized UK Representative
Name: Xiaomi Technology UK Limited
Address: Part Ground Floor, North Wing,
100 Brook Drive, Green Park, Reading
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer postal address:
#019, 9th Floor, Building 6, 33 Xi’erqi Middle Road,
Haidian District, Beijing, China, 100085
Brand: Redmi Model: 23073RPBFG
© Xiaomi Inc. All rights reserved.
Documents / Resources
| mi
M84_PAD_QSG Redmi Pad
SE
[pdf] User Guide
M84_PAD_QSG Redmi Pad SE, M84_PAD_QSG, Redmi Pad SE, Pad SE, SE
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>