Betsen X1 Wireless Bluetooth Speaker Instruction Manual
- June 26, 2024
- Betsen
Table of Contents
Betsen X1 Wireless Bluetooth Speaker
Product Specifications
- Model: X1
- Speaker: 40mm 4 3W
- Battery capacity: 500mAh
- Input: 5V 200mAh
- Bluetooth distance: 10 meters
- Working voltage: DC5V
- Charging time: about 2 hours
- Playing time: about 2.5 hours
- Product size: 5.05.03.6CM
- Product weight: about 125g
Product Usage Instructions
- Power On/Off and Bluetooth Pairing
- To power on/off the speaker, double-click the On/Off button. To pair the speaker with your Bluetooth device, long press the switch button until the blue light flashes. Open your phone’s Bluetooth settings, connect to the product’s pairing name. Once paired successfully, the blue light will stay on.
- Call Function
- To reject calls, long-press the switch button. To answer calls, short press the switch button. Ensure the call is as close as possible to the MIC hole for optimal sound quality.
- Dual-Machine Coupling Function
- If you have two devices waiting for a Bluetooth connection, double-click the switch button on one of them. You will hear a beep, then connect to Bluetooth on your phone to complete the coupling process.
- USB Charging
- To charge the speaker, use a Type-C, 5V/200mAh charging cable. When charging, the red light will be on; it will turn off when the battery is fully charged.
- Automatic Shutdown
- If your phone is not connected to Bluetooth within 5 minutes, the speaker will automatically shut down to save power.
Product Specification
- Model: X1
- Speaker: 40mm 42 3W
- Battery capacity: 500mAh
- Input: 5V. 200mAh
- Bluetooth distance: 10 meters
- Working voltage: DC5V
- Charging time : about 2 hours
- Playing time : about 2.5 hours
- Product size : 5.05.03.6CM
- Product weight : about 125g
Product Illustration
Function Display
Operating Guidelines
- Music playback : long press the switch button, the blue light flashes, open the cell phone bluetooth, connect the product pairing name, pairing success, pairing success after the blue light is always on.
- Call function : The switch button can be long-pressed to realize the rejection of calls, short-pressed to answer, and call as close as possible to the MIC hole.
- Dual-machine coupling function: two machines waiting for the Bluetooth connection status, take any one machine double-click the switch button, “beep” and then through the cell phone to connect to the Bluetooth, you can be coupled.
- USB charging : after plugging in the charging cable, the red light is on when USB charging and the red light goes out when the battery is fully charged.
- The product will automatically shut down if the cell phone is not connected to Bluetooth within 5 minutes.
FCC
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Made In China
Frequently Asked Questions
- Q: How do I know if the Bluetooth is connected?
- A: A blue light that remains on indicates that the Bluetooth is connected successfully.
- Q: What should I do if the battery is not charging?
- A: Make sure you are using a Type-C, 5V/200mAh charging cable and that it is properly connected. If issues persist, consult a dealer or technician for assistance.
- Q: Can I pair this speaker with multiple devices simultaneously?
- A: The speaker supports a dual-machine coupling function, allowing you to pair it with two devices at once. However, it can only play audio from one device at a time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>