NAVTEC LUBRI-X7 High Performance Multifunction Lubricant Instructions
- June 26, 2024
- NAVTEC
Table of Contents
NAVTEC LUBRI-X7 High Performance Multifunction Lubricant
FEATURES
LUBRI-X7 is a neutral and versatile product: it does not attack common metals and supports: steel, stainless steel, light alloys, aluminium, plastics, rubber. QUICKLY PENETRATES oxidized deposits, rust, scale, oxidized grease, dust, grease and other residues present on blocked or stuck surfaces such as threads, nuts, mechanical or electromechanical parts, etc. Reduces the risk of breakage of calcined parts.
Leaves a LUBRICANT PROTECTIVE film on the treated surfaces, facilitating disassembly and reassembly operations, the movement of mechanical parts, eliminating creaking, and increasing the longevity of mechanisms and joints. Usable in MULTIPOSITIONS.
APPLICATION
Depending on the areas, spray LUBRI-X7 directly on the surfaces to be loosened:
- Localized spraying: use the extension tube
- Wide spray: remove the extension tube.
Let it penetrate the stuck parts. Repeat the application if necessary. Apply
during assembly of parts to facilitate assembly and subsequent disassembly.
7 FUNCTIONS
- Release agente (anti-seize)
- Anti moisture dielectric
- Hydrophobic
- Water repellent – dehydration effect
- Lubricant
- Anti-corrosion protector
- High pressure antioxidant protector
- Anti-wear protection
- Reduces friction coefficient
TECHNICAL SPECIFICATIONS
| DILUTION | Not applicable |
|---|---|
| CHEMICAL NATURE | Aerosol packaged preparation, containing a synergistic |
combination of mineral oil, molybdenum disulfide and corrosion inhibitor
agent.
SURFACTANTS| –
PHYSICAL STATE / COLOUR| Liquid / Anthracite
ODOUR| Solvent
pH| 7.5
SOLUBILITY IN WATER| No
RINSING| Not applicable
FOAMING| No
DENSITY| 810 g/l +/- 20 g/l
FLASH POINT| 23ºC (closed cup)
DIELECTRIC STRENGTH| 57900 Volts – NF EN 60156
CHEMICAL REACTION| Neutral
CLASSIFICATION|
DANGER
VALIDITY| 2 years. Stored in original packaging. Protect the product from excessive sunlight. Avoid extreme temperatures.
PRECAUTIONS
Chemical Product: Read the label and safety data sheet before using this product. Do not leave within the reach of children.
Store and use away from flames, heat sources, ignition and sparks, electrical equipment in operation. Do not smoke. Do not use in confined atmospheres. Use short presses without prolonged spraying. Ventilate well after use.
Do not use for purposes other than those intended for the product.
Always perform a test to determine compatibility and appropriate contact time .
AVAILABLE PACKAGING
CUSTOMER SUPPORT
It’s a brand from:
IMPORQUIMICA – Indústria Portuguesa de Produção Química, S.A.
Zona Industrial do Carvalhinho, Lote 11 – Apart ado 39
2861-909 Moita – Portugal
Tel.: +351 212 808 390 | E-mail:
[email protected]
Call to the national landline network
