FISHER AND PAYKEL AHD3-RS36A 36 Inch Square Handle Kit For French Door Refrigerator Freezer User Guide

: June 24, 2024
: FISHER and PAYKEL

Table of Contents

FISHER AND PAYKEL AHD3-RS36A 36 Inch Square Handle Kit For French Door
Product Information
Usage Instructions
DIMENSIONS
SPECIFICATIONS
Where applicable
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FISHER AND PAYKEL AHD3-RS36A 36 Inch Square Handle Kit For French Door

Refrigerator Freezer

Product Information

The Contemporary Square Handle Kit is designed for use with Integrated French Door Refrigerator Freezers, specifically the 36 model. It features a sleek and modern design that adds a touch of sophistication to your kitchen space.
This handle kit is constructed to high-quality standards and is compatible with models RS36A72 and RS36A80. It can be paired with a Fisher and Paykel stainless steel door panel or a custom cabinetry panel made by your cabinet maker.

Specifications:

Product: Contemporary Square Handle Kit for Integrated French Door Refrigerator Freezer, 36
Dimensions: Height – 5/8, Width – 28 5/8, Depth – 1 5/8
SKU: 24624
Compatible with: RS36A72, RS36A80

Usage Instructions

Installation:

Ensure the refrigerator freezer is unplugged before installation.
Align the handle kit with the designated mounting points on the door.
Secure the handle in place using the provided screws or fasteners.
Repeat the process for each piece of the handle kit if it is a multi-piece set.
Once installed, test the handle for sturdiness and adjust if necessary.

Care and Maintenance:
To maintain the handle’s appearance and functionality:

Regularly clean the handle using a mild detergent and a soft cloth.
Avoid using abrasive cleaners or materials that may scratch the surface.
Check the handle periodically for any loose screws and tighten them if needed.

FAQ:

Q: Can this handle kit be used on other models of refrigerator-freezers?
A: This handle kit is specifically designed for use with RS36A72 and RS36A80 models. It may not be compatible with other models, so it is recommended to check with Fisher & Paykel’s Customer Care Centre for compatibility information.
Q: How can I obtain additional screws or fasteners for the handle kit?
A: If you require extra screws or fasteners for installation or maintenance, please contact Fisher & Paykel’s Customer Support at 1.888.936.7872 for assistance.

Contemporary Square Handle Kit for Integrated French Door Refrigerator Freezer, 3 Piece Compatible with RS36A72, RS36A80 Pair with a Fisher and Paykel stainless steel door panel or cabinetry panel made by your cabinet maker

DIMENSIONS

Height 5/8″
Width 28 5/8″
Depth 1 5/8″

SPECIFICATIONS

Product dimensions

Depth 1 5/8″
Height 5/8″
Width 28 5/8″
SKU 24624

The product dimensions and specifications on this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. Fisher & Paykel Appliances Ltd 2020

Where applicable

All appliances use energy, and energy usage typically generates carbon emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy. This is calculated either annually or per cycle, using the product’s market-specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region.
Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products. For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.