JiaRanHua SMJS0201, SMYK1503 DC Motor Wireless Controller Instructions
- June 24, 2024
- JiaRanHua
Table of Contents
ShenZhen JiaRanHua
Electronics Technology Co.,Ltd.
Functional specification of DC12~30V motor controller
[Product Name] DC motor wireless controller
[Product Model] SMJS0201-29V-A +SMYK1503
[Product Overview] This product is specially made for motor control (control
forward, reverse, stop), can be operated manually and remote control, simple
and convenient operation, remote control shape fashionable and generous, AC /
DC can be selected (indicated when ordering).
This DC wireless controller and three key remote control is a complete set of
wireless digital intelligent learning manual, wireless control components,
mainly used in the control ac (dc) motor reversal (e. g., lift, hoist,
elevator, conveyor, electric curtain, electric hanger, garage door, expansion
door, etc.), can be used to control the equipment to achieve positive,
reverse, or switch on, break conversion, realize wired wireless compatible.
This product has the characteristics of high confidentiality, large storage,
stable performance and low power consumption, and is easy to use, do not need
to use the traditional jumper or pull switch coding, only the remote control
transmitted by the wireless signal for the receiving controller to receive and
store can achieve matching use.
Each receiving controller can store multiple transmitters (remote control). If
the learned remote control is lost during use, just clear the information
stored in the controller, and the lost remote
Remote control part
- Use three-key shell (screen is, top, stop, down)
- Operating voltage: 12V (battery 23A)
- Operating current: 15MA
- Static current: less than 5 uA
- Operating frequency: 433.92M
- Working distance: 20~30 meters indoor
- Coding method: using the learning code chip (1 million group codes)
- Operation function: press the upper key to turn, press the stop key to stop, press the key to reverse
Controller section
- DC (12 / 29) input, control DC output (motor reversal)
- Operating voltage: DC12~30V
- Static current: 10MA
- Operating current: less than 40MA
- Rated current: less than 10A
- Rated power: less than 500W
- Operating frequency: 433.92M
- Working distance: 20~30 meters indoor
- Decoding mode: using the single-chip microcomputer learning code
operation declaration
- Pairing description: press the receiving learning button, in 10S, press any key on the remote control, the learning light flash three times, then out, indicating the success of learning
- Delete code description: long press the learning key 7S on the controller, the learning light flash three times, indicating the deletion code
- Remote control: press the remote control UP key: the motor is forward or up; press the remote control DOWN button motor stop, then press the remote control DOWN button, the motor reverse or down, press the UP button motor stop; output use the interlocking function, press the UP or DOWN button after the power opportunity to turn in one direction (not stop), only press the reverse button of the remote control, the motor will stop turning
- Manual function description: hold up or down, the motor up or down, open stop
- The controller is powered off, and the original working state is automatically removed
- Motor conversion direction description: long press the remote control up and down key 10S, the learning light flash three times, the direction reversal successfully
When using manual wireless integrated products, manual is preferred (no matter
the motor is in any state, press the manual key to perform the manual button
dScope of application: DC motor control equipment
such as elevator, hoist, hoist, conveyor, projection
screen, Electric curtains, electric hangers, garage
doors, retractable doors, etcirection) Scope of application: DC motor control
equipment such as elevator, hoist, hoist, conveyor, projection screen,
Electric curtains, electric hangers, garage doors, retractable doors, etc
Product size chart
| project name | size |
|---|---|
| Controller length | 91mm |
| Controller width | 25mm |
| Controller hickness | 26mm |
| Remote control length | 62mm |
| Remote control width | 29mm |
| Remote control thickness | 13mm |
Note: To ensure the receiving distance, the product location is
recommended to keep away from the interference source as far as possible
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Office address: 4th Floor, Building C, No. 11, Dakan Industrial 2nd Road,
Xili Street, Nanshan District, Shenzhen, Guangdong, China
Company website:http://www.jiaranhua.com
Technical consultation: Hong Zuojing
Company Email: szjrhkj@163.com
Mobile Phone: 18123851792
Company phone: (0755) 26037143
Fax: (0755) 26037143
QQ: 825120774