SCIWIL M5 E-Bike Display User Guide

SCIWIL M5 E-Bike Display

Product Information

• Product Name: E-Bike Display
• Product Model: M5
• Working Voltage: DC 24V/36V/48V/60V/72V
• Rated Working Current: 12mA

Product Usage Instructions

1. Display Interface:
   The display interface of the M5 E-Bike Display consists of three main sections:

   • Riding Interface: Provides real-time information such as speed, distance, and battery level.
   • Setting Interface: Allows users to adjust various settings related to the display and bike functions.
   • Error Interface: Displays error codes or messages in case of malfunctions.

2. Key Pad:
   The keypad on the M5 allows users to navigate through different menus and options on the display.

3. Key Operation:
   Use the keypad to select options, confirm settings, and navigate the display menus.

4. Settings:
   Access the settings menu to customize preferences such as units (metric/imperial), backlight brightness, and language.

5. Error Code:
   Refer to the error code section to troubleshoot any issues indicated by the display.

6. Connection:
   Ensure proper connections between the display unit and the electric bike system for accurate data display.

Frequently Asked Questions (FAQ):

• Q: How do I update the firmware of the M5 E-Bike Display?
  A: Firmware updates for the M5 display can be downloaded from the manufacturer’s website and installed following the provided instructions.

• Q: What should I do if the display shows an error code?
  A: Refer to the user manual to identify the meaning of the error code displayed. If needed, contact customer support for further assistance.

E-Bike Display

• Model: M5
• Protocol: Lithium II
• Version: V6.03

Scan the QR Code to Download the PDF

Changzhou Sciwil E-Mobility Technology Co., Ltd.

Safety Notes

PLEASE TAKE CAUTION WHEN USE, DO NOT PLUG OR UNPLUG THE DISPLAY WHILE YOUR E-BIKE IS POWERED ON.

• AVOID CLASHES OR BUMPS TO THE DISPLAY.
• AVOID USING IN HEAVY RAINS, SNOWS, OR LONG EXPOSURE TO STRONG SUNLIGHT. DO NOT TEAR THE WATER-PROOF FILM ON THE SURFACE OF THE SCREEN, OTHERWISE THE WATER-TIGHT PERFORMANCE OF THE PRODUCT MAY BE DEGRADED.
• DO NOT PLUG OR UNPLUG THE DISPLAY WHILE THE SYSTEM IS POWERED ON. UNAUTHORIZED ADJUSTMENT TO DEFAULT SETTINGS IS NOT SUGGESTED, OTHERWISE NORMAL USE OF YOUR E-BIKE CAN NOT BE GUARANTEED.
• WHEN THE DISPLAY PRODUCT DOES NOT WORK PROPERLY, PLEASE SEND THE IT FOR AUTHORIZED REPAIR IN TIME.

Overview

1. Product Name and Model
   • Product Name: E-Bike Display
   • Product Model: M5
2. Product Introduction
   M5 features a high-brightness anti-glare color LCD and minimalist interface, working as an ideal HMI solution for EN15194 electric bikes.

Specifications

• Working Voltage: DC 24V/36V/48V/60V/72V
• Rated Working Current: 12mA
• Leakage current: <1uA
• Screen Size: 3.8” LCD
• Communication Type: UART (by default) / CAN (optional)
• Optional Functions: Bluetooth, NFC
• Working Temperature: -20°C ~ 60°C
• Storage Temperature: -30°C ~ 70°C
• Waterproof Rating: IP65

Function

• Boot password
• System unit switch (km/h or mph)
• Assist Level Control and Display
• Battery indication: battery level percentage, low voltage indication
• Speed display：(in km/h or mph) real-time speed (SPEED), max speed (MAX), average speed (AVG)
• Distance：single-trip distance (TRIP), total travel distance (ODO)
• Assist Mode Control and Display (3/5/9 levels)
• Walk assist mode
• Front light indication: front light status supported by the controller.
• Error code indication
• Riding Info: Braking Status, Front Light Status, Cruise, Low Voltage.
• Turning Signals: This function works with the controller.
• Dual Drive Control and Display: This function works with the controller.
• Status of Double Battery Packs: optional, works with the controller.
• NFC Function: optional.
• Bluetooth Connection: optional, support OTA upgrade via mobile phone.

Size

Assembly

1. Open the holder ring/rubber spacer of the display and fix the display on the handlebar, adjust it to a proper facing angle. Use a M4 Hex Wrench to fix and tighten the screws. Standard fixing torque: 1N·m.
   • Damage due to excessive fixing torque is not covered by warranty.
2. Open the holder ring/rubber spacer of the keypad and fix it on the handlebar, adjust it to a proper facing angle. Use a M3 Hex Wrench to fix and tighten the screws. Standard fixing torque: 1N·m.
   • Damage due to excessive fixing torque is not covered by warranty.
3. Plug the 5-pin connector of the display to the coupling connector of the Controller.

Serial Code

• 111：Customer Code
• 22：Protocol Code
• 333333：P.O. Date （YYMMDD)
• 555：Order Receiving Number
• 6666: Production Date （YYMM)

Operation

Display Interface

Riding Interface

• Status: Real-time Riding Status: Bluetooth, Front Light, Brake, Low Voltage, Turning, Cruise, Drive Status, etc.
• Battery Status: Residual Battery Percentage
• Multi-Function Section: ODO (total range), TRIP (single ride range), MAX (max. speed), AVG (average speed), TIME (riding time), VOL (battery voltage), Wh (motor power), CUR (current), etc.
• Assist Level Mode: 3/5/9 Levels available.

Setting Interface

In the above interface: Setting Item: P01, Parameter Value: 02

Error Interface

In the above interface: Error Indicator: ERROR, Error Code: E10

Key Pad

SWK1 Keypad Illustration:

There are 5 keys on the SWK2 keypad, in the following instructions:

• is called Up Key;
• M is called Mode Key;
• is called Down Key;

Key Operation

The key operation guide is as follows:

• Press and Hold: means press and hold the key(s) for more than 2s.
• Press: means press the key(s) for less than 0.5s.

On/Off

• Turn on the Display: When the display is off, press and hold the Mode Key to turn on the display, it will show the boot interface, and then enter the riding interface. (If the boot password is activated, enter the boot password at the start). Turn off the
• Display: When the display is on, press and hold the Mode Key and the display will be turned off. If no operation is engaged for 10 minutes (0km/h), the display will be auto-off. Auto-off time can be set in the Settings.

Assist Level
Press the Up Key or Down Key to switch assist levels. There are 5 levels by default: 0/1/2/3/4/5. 0 means no assist power.

Toggle Displays
When the display is on, press the Mode Key to toggle among ODO (total range), Trip (single trip range), TIME (riding time), etc.

Light On/Off

• Turn on the Front Light: when the front light is off, press and hold the Up Key to turn it on, and the light icon will be shown on the riding interface (to remove this function, please reconfigure the controller).
• Turn off the Front Light: when the front light is on, press and hold the Up Key to turn it off, and the light icon will be off on the riding interface.

Walk Assist Mode

• Engage Walk Assist Mode: On the riding interface, press and hold the Down Key to enter walk assist mode. Hold the Down Key to engage walk assist mode, the walk mode icon will be shown on the riding interface, the real-time speed will be shown in the speed section.
• Disengage Walk Assist Mode: release the Down Key to disengage the walk assist mode, and the icon will off on the riding interface.

Settings

Setting Operations

1. Enter the Settings: when the display is on, press and hold the Up Key and the Down Key together to enter the Settings. Available setting items include system voltage, wheel size (inch), magnetic steel number for speed gauge, speed limit, etc (please refer to 4.2 Setting Items).
2. Adjust Settings: on the Settings interface, press the Up Key or the Down Key to set values for items. The value will blink after the change. Press the Mode Key to save the set value and switch to the next item.
3. Save and Exit Settings: press and hold again the Up Key and the Down Key together to exit the Settings and save the set value. The system will save and exit automatically if there’s no operation for 10s.

Setting Items

• P00: Factory Reset: optional.
• P01: Backlight Brightness. 1: darkest; 3: brightest.
• P02: System Unit. 0: km (metric); 1: mile (imperial).
• P03: System Voltage: 24V/36V/48V/60V/72V.
• P04: Auto-Off Time
  • 0: never, other value means auto-off time interval. Unit: minute
• P05: Pedal Assist Level
  • 0-3 Level Mode；1-3 Level Mode (no Level0)
  • 0-5 Level Mode；1-5 Level Mode (no Level0)
  • 0-9 Level Mode；1-9 Level Mode (no Level0)
• P06: Wheel Size. Unit: inch; Increment: 0.1.
• P07: Motor Magnets Number for Speed Gauge. Range: 1-100
• P08: Speed Limit. Range: 0-100km/, communications status (controller-controlled). The max speed will be kept constant at the set value.
  • Error Value: ±1km/h (applicable to both the PAS/throttle mode)

Note:
The above-mentioned values are measured by metric units (km/h). When the system unit is set to the imperial unit (mph), the speed displayed will be automatically switched to the corresponding value in the imperial unit, however, the speed limit value in the imperial unit interface won’t change accordingly.

• P09: Direct Start / Kick-to-Start
  • 0: Direct Start (Throttle-on-demand);
  • 1: Kick-to-Start
• P10: Drive Mode Setting
  • 0: Pedal Assist – The pedal assist level decides the motor power output. In this status, the throttle does not work.
  • 1: Electric Drive – The e-bike is only controlled by the throttle. In this status, the pedal assist does not work.
  • 2: Pedal Assist + Electric Drive (electric drive does not work in direct-start status)
• P11: Pedal Assist Sensitivity. Range: 1-24.
• P12: Pedal Assist Starting Intensity. Range: 0-5.
• P13: Magnets Number in Pedal Assist Sensor. 3 Types: 5/8/12pcs.
• P14: Current Limit Value. By default: 12A. Range: 1-20A.
• P15: Display Low Voltage Value.
• P16: ODO Clearance. Press and hold the Up key for 5s and the ODO value will be cleared.
• P17: Cruise. 0: cruise function deactivated, 1: cruise function activated.

Error Code

Connection

Pin No.

| Wire Color|

Functions

---|---|---
1| Red（VCC）| Display Power Wire
2| Blue（K）| Electric Lock Wire
3| Black（GND）| Display Ground Wire
4| Green（RX）| Display Data Receiving Wire
5| Yellow（TX）| Display Data Sending Wire

Extended Functions- Front Light:

• Brown (DD): The power wire (+) of the light
• White (GND): The ground wire (〨) of the light.

Note: For waterproof connectors, wire sequences are concealed.

Warranty

• In compliance with local laws, Sciwil provides a limited warranty period covering 24 months after the date of manufacturing (as indicated by the serial number), which applies to quality issues during normal operations.
• The limited warranty shall not be transferred to a third party other than as specified in the agreement with Sciwil.

Warranty Exclusions:

• Sciwil products that have been opened, modified, or repaired without authorization.
• Damage on the connectors.
• Damage to the surface after leaving the factory, including shell, screen, buttons, or other appearance parts.
• Damage to wiring and cables after leaving the factory, including breaks and exterior scratches.
• Damage or loss due to force majeure (e.g. fire or earthquake) or natural disaster (e.g. lightening).
• Out of the warranty period.

Version

This display user manual complies with the general software version (A/0) of Changzhou Sciwil E-Mobility Technology Co., Ltd. some chances display products on some e-bikes may have a different software version, which is subject to the actual version in use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>