kwcdn Mini Nanny 1080p Pen Camera User Guide
- June 21, 2024
- kwcdn
Table of Contents
USER GUIDE
FULL HD 1080p
Product Part
How to Use
-
Power on and record video:
Press the top button for 3 seconds until the blue light flash 3 times and then go out.The camera is turned on now and is recording a video. -
Check working state:
Press the top button one time to check if your camera is recording. lf the blue light flash 1 time and then go out, your camera is recording avideo.
If there is no response from the indicator light, your camera is powered off. -
Power off & save video:
When recording a video, press the top button for 3 seconds until the red- light flash 3 times and then go out, The camera is turned off now and the previous recording has been saved as a video. -
Charge battery:
When connecting the camera pen to a power supply, the red light will be solid on. The red light will turn to blue light when the camera pen is fully charged.
Time Settings
Connect the camera to computer (via USB cable) and find the file named
TIME.TXT in the Micro SD card. Open the TIME.TXT file you can find “2020/01/01
23:59:59 Y”.
if you need to change the time, you can change “2020/01/01 23:59:59 Y” to the
time you want, like “2020/06/16 21:19:19 Y”. “Y”stands for time stamp.
If you do not need timestamp, you can change “Y”to”N” After changing, you just
need to save the file and restart your camera.
Features
| Video Resolution | 1920 X1080P |
|---|---|
| Video Fps | 30fps |
| Battery capacity | 350mAh |
| Working Time | 180 mins |
| Maximum Memory | 128G |
Technical Support
-
Why there is no image shown in video?
Pleasa confirm the camera lens is not being covered by slide cover. -
How long willit take to fully charge the battery? How much time can it work?
It will take you about 2 hours to fully charge the battery. The camera can support up to 180 mins recording after fully charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>