DAYTON AUDIO VP1 Phono Preamplifier User Manual
- June 5, 2024
- DAYTON AUDIO
Table of Contents
PHONO
PREAMPLIFIER
Model: VP1 User Manual
Thank you for purchasing the Dayton Audio VP1 Phono
Preamplifier with RIAA Equalization.
Package Contents
• Manual
• Phono Preamp
• Power Supply
Callouts
- Power LED – LED that illuminates when the unit is powered on.
- DC Power Input 12V 0.5A – Power supply input used to connect the included power supply.
- Ground – Ground connection to connect to the ground on your turntable.
- Right In – Right input channel to connect to your turntable.
- Left In – Left input channel to connect to your turntable.
- 6.3mm Out – 6.3mm (1/4″) output to connect to headphones.
- Right Out – Right output channel to connect to an amplifier.
- Left Out – Left output channel to connect to an amplifier.
Note: Do not use both the 6.3mm output and the RCA output at the same time.
Top Panel
Rear Panel
Specifications
Input Connection: ………………… RCA
Output Connections: ……………. 1/4″ TRS Jack and RCA
Earth: …………………………………… Screw clamp
Input Signal: ………………………… 5mV @ 1 KHz
(max. -23,5 dBV @ 1kHz)
Output Signal: ……………………… Max. +11 dBV @ 1 kHz
S/N Ratio: …………………………….. 70dBu
Input Impedance: …………………. 47K Ohm
Output Impedance: ………………. 50 Ohm
THD: …………………………………….. <0.05%
Frequency: …………………………… 18-20,000Hz
Dimensions: …………………………. 4.1″ × 2.4″ × 1.3″
Power Supply: ……………………… DC12V, 500mA
5-Year Limited Warranty
See daytonaudio.com for details
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
Dayton Audio®
705 Pleasant Valley Dr.
Springboro, OH 45066 USA
http://bitly.com/J5Iu8W?r=qr
Last Revised: 5/13/2021
Documents / Resources
|
DAYTON AUDIO VP1 Phono
Preamplifier
[pdf] User Manual
VP1, Phono Preamplifier
---|---