Power Dynamics PD810R Bodypack Receiver Instruction Manual
- June 21, 2024
- Power Dynamics
Table of Contents
PD810R Bodypack Receiver
Ref. nr.: 179.000 INSTRUCTION MANUAL
V1.1
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. For safety instructions, please refer to the instruction manual of 179.002, the PD810 main item.
RECEIVER
-
Earphone jack
3.5mm earphone jack. -
Balance
Left/right balance adjustment knob. -
Antenna
-
LED indicator
LED flashes in red color when battery level is low.
LED will light up when signal is received. -
LCD display
-
On/off
-
Up
-
Down
-
Set
-
Battery compartment (2xAA batteries)
Insert two AA-type batteries to power the receiver. Open the receiver’s front cover and insert the batteries as instructed in the battery compartment. The display shows the power level of the batteries: When the battery indicator flashes, the batteries are empty and the receiver will automatically switch off shortly after. If the receiver is not used for a long period (approx. 1-2 weeks), remove the batteries to protect the device from possible leakage.
RECEIVER DISPLAY
- Reception Shows reception quality.
- Mode Indicates whether stereo- or mono mode is being used.
- Battery Indicates battery level.
- Group Shows frequency group.
- Channel Shows channel.
- Frequency Shows frequency.
RECEIVER FUNCTION
Group and channel selection
Press SET, “GROUP” will flash. Press UP or DOWN to select the desired
frequency group.
Press SET again, “CHANNEL” will flash. Press UP or DOWN to select the desired
channel. Mode selection
Press and hold SET, until “STEREO” will flash. Press UP or DOWN to select
“STEREO” or “MONO”, press SET to confirm.
TECHNICAL SPECIFICATION
| Output connections | : 3.5mm Jack |
|---|---|
| Dynamic range | : >80dB |
| Frequency | : 863.000 – 865.000 MHz |
| Frequency response | : 20Hz – 20.000Hz |
| Sensitivity | : 80dB on input 6dBµV |
| Signal-to-noise ratio | : >105dB |
| THD | : 3% |
| Batteries | : 3V (2x AA) |
| Dimensions | : 120 x 62 x 23mm |
| Weight | : 0.15 kg |
The specifications are typical. The actual values can slightly change from one
unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community
Directives to which they are subject:
| European Union | United Kingdom |
|---|
Tronios B.V.,
Bedrijvenpark Twente Noord 18,
7602KR Almelo, The Netherlands| Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
2014/35/EU
2014/30/EU
2011/65/EC
2014/53/EU| S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032
S.I. 2017:1206
No license required (excluding geographical restrictions)
BE| DK| F| Fl| DE
HU| IT| NL| NO| PL
PT| RO| SI| ES| SE
CH| GB| | |
Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB)
Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2023 by Tronios The Netherlands