SPARK AND BELL BN41 3GG Long Clear Reeded Glass Cylinder Pendant Light Instruction Manual
- June 20, 2024
- SPARK AND BELL
Table of Contents
SPARK AND BELL BN41 3GG Long Clear Reeded Glass Cylinder Pendant Light
Instruction Manual
Instruction SheetInstruction Sheet
Thank you for purchasing our lights. All of our lights are designed and hand- made in the UK and are made to meet the requirements of UK and EU standards. When you’re ready to install your light, make sure you hand the instructions to a quali- fied electrician. With that in mind please:
- Shut off the power before installing
- Do NOT exceed the wattage listed on the label
- These lights are for INDOOR USE ONLY
- Always make sure any surface close to the bulb
- Always make sure any surface close to the bulb
- Ensure fixings are appropriate for the mounting surface
- Screws provided may not be suitable
Adjusting The Fabric Cable:
- WARNING: Terminals must be reli e ** _ved from strain or twisting.
_ After adjusting, ensure all cables are fully secure in the terminals.**
-
Release grub screw with 4mm flat head screwdriver.
-
ENSURE light is properlly supported before loosening the grub screw
-
Adjust fabric cable to desired length.
-
Ensure there is at least 80mm left behind the sconce.
Re-tighten screw to same tightness as before.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Loading......