SENCOR SEP 550 BT Wireless Headphones User Manual
- June 16, 2024
- SENCOR
Table of Contents
SENCOR SEP 550 BT Wireless Headphones
Product Information
Supply content
- “L” and “R” earphone
- Charging case
- User’s manual
- USB-C charging cable
Description
SEP 550 BT Bluetooth earphones description
- “L’.’ left earphone charging compartment
- “R” right earphone charging compartment
- Charging case
- Charging case battery level display and earphones charging indicator
- USB-C charging connector
- Earphone LED indicator
- Touchpad
- R Right earphone
- L Left earphone
Left and right earphone function
- Long touch (5 seconds) – turn off/on the earphone
- 1 x long touch (2 seconds) during an incoming call – call rejection
- 1 x short touch during an incoming call – answer the call
- 1 x short touch during an ongoing call – end call
- 1 x short touch – play function
- 1 x short touch – pause function
- 3 x short touch – launch SIRI/Google Assistant
Left earphone
Long touch in music mode reduces volume by one level 2 x short touch –
previous track
Right earphone
Long touch in music mode increases volume by one level 2 x short touch – next
track
Putting into operation
Before first use, be sure to read the safety instructions contained in this user’s manual carefully. Before first use, remove the shipping foil from the contacts of the earphones and place them in the charging case. Wait until the charging case and earphones are fully charged.
-
Turning on the earphones
Taking the earphones out of the charging case will automatically switch them on. When the earphones are in the off state outside the charging case, press and hold the touch pad on each earphone until the earphones turn on. -
Turning off the earphones
Inserting the earphones into the char- ging case will automatically turn off the earphones. Long press and hold the touch pad to turn off the earphones. -
Pairing the earphones with each other
The earphones are already paired from the factory and do not need to be paired with each other. (if pairing to TWS mode fails, return the earphones to the charging case and repeat the above instructions).
Caution : To prevent damage to your hearing, always keep the volume level of your device to a minimum before connecting BT earphones to your mobile device. Keep the touchpad clean and avoid touching other objects or body parts such as hair.
Note : If the BT earphones are not paired with any device, they will turn off when left idle for a long time. Put them in the case.
Pairing your earphones via Bluetooth
To pair the BT earphones with your mobile device, do the following:
- Remove the earphones from the charging case (blue and red intermittent earphone indication) and look for the Bluetooth earphone name “SEP 550BT” in the device you want to pair and start the pairing process.
- Always perform the pairing process when both earphones are removed from the charging case.
If you are requested to enter a pairing code while your device and the BT earphones are pairing, use the following code: “0000”.
- To cancel the pairing process, disconnect the BT earphones from your mobile device (cancel the Bluetooth pairing).
Note : To ensure a stable Bluetooth connection, make sure that the distance between the BT earphones and your paired device is kept within 10 meters. Depending on ambient interference, in some cases, it may be necessary to maintain a shorter distance between the BT earphones and the paired device.
Charging
A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. When the BT earphones are placed in the charging case, the LED indicators show:
- The red continuous earphones indication (on the earphone) indicates charging
- When the USB-C charging cable is connected, the charging case will indicate the charging status by intermittently displaying the charging status of the charging case. A fully charged charging case will display 100 on the level display.
Attention : For charging, use only the original accessories supplied with the appliance. Always check that the connector of the charging cable fits snugly into the connector of the charging case. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10% – 20%). Charge continuously until fully Charged.
Recommendation :
If your earphones are not to be used for an extended period, we recommend to
fully charge the batteries once every two to three months. We recommend
storing the BT earphones and the charging case with the battery charged to
prevent irreparable damage to the battery (loss of capacity).
Specification
- Bluetooth version: Bluetooth 5.3
- Transmission range: 15 m
- Charging time: 1 hour
- Number of charges from the charging case: 3 times
- Music playback time: Approximately 5 hours at 60% volume
- Battery capacity: 3.7 V 25mAh each earphone, 3.7V 200mAh charging case
- Controls: Touch controls
- Impedance: 160 ÷ 10%
- Driver: @ 6 mm x 2x
- Frequency: 20 Hz – 20 kHz
- Sensitivity: 102 +3 dB
- Material: ABS
- Charging connector: USB-C
Safety Notice:
- Please observe the rules of the Country or Region which you are in while driving.
- Do not disassemble or modify the headset for any reason, otherwise, It may damage or burn the headset.
- If there is any quality problem, please send the headset to an authorized service center for repair.
- Please keep the equipment along with all the accessories out of the reach of children and pets.
- Extreme temperatures will cause the device deformation, reduce the charging capacity,y and shorten the working life.
- Please do not immerse the earphones in water. The guarantee will be lost if the damage is caused by immersion in water.
- It will damage your hearing if you listen at a high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music.
Instructions and information regarding the disposal of used packaging materials Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory, or packaging
indicates that this product shall not be treated as household waste. Please,
dispose of this product at your applicable collection point for the recycling
of electrical & electronic equipment waste. Alternatively in some states of
the European Union or other European states, you may return your products to
your local retailer when buying an equivalent new product. The correct
disposal of this product will help save valuable natural resources and help
prevent the potential negative impact on the environment and human health,
which could be caused as a result of improper liquidation of waste. Please ask
your local authorities or the nearest waste collection center for further
details. The improper disposal of this type of waste may fall subject to
national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or your
seller. This appliance complies with EU rules and regulations regarding
electromagnetic and electrical safety. Changes to the text, design, and
technical specifications may occur without prior notice and we reserve the
right to make these changes.
Hereby, FAST CR, a.s. declares that the radio equipment type SEP 550 BT complies with Directive 2014/53/EU.
There’ll exo the ou declaration of conformity is available at the following internet address: www.sencor.eu
Manufacturer: FAST CR, a.s. U Sanitasu 1621 25101 Republic