Shenzhen zdyrobot Technology Co Ltd 5CLASS Helmet Bluetooth Headset Instruction Manual

Shenzhen zdyrobot Technology Co Ltd 5CLASS Helmet Bluetooth Headset

Product Information

• Specifications
  • Compliance: FCC Part 15
  • RF Exposure: General RF exposure requirement met

Product Usage Instructions

• Safety Precautions
  • Before using the device, please read the user manual carefully and adhere to the following safety precautions:
  • Avoid making any changes or modifications to the device that are not explicitly approved by the manufacturer.
  • Ensure the device is used following FCC Rules to prevent harmful interference.
  • Do not operate the device in a manner that may cause undesired operation due to interference.
• Installation
  • Follow these steps to install the device:
  • Place the device in a well-ventilated area.
  • Connect the necessary cables to the device as per the user manual.
  • Power on the device and ensure it is functioning correctly.
• Operation
  • To operate the device:
  • Follow the manufacturer’s instructions for usage.
  • Ensure the device does not cause harmful interference.
  • If interference is encountered, the device must accept it without causing undesired operation.
• Maintenance
  • To maintain the device:
  • Regularly clean the device as per the cleaning instructions in the user manual.
  • Check for any signs of damage and contact the manufacturer for repairs if needed.

FAQs

• Q: What should I do if the device is not functioning correctly?
  • A: If you encounter any issues with device operation, refer to the troubleshooting section of the user manual or contact customer support for assistance.
• Q: Can I make changes to the device on my own?
  • A: No, any changes or modifications not explicitly approved by the manufacturer may void your authority to operate the equipment. Contact the manufacturer for any modifications.

PRODUCT OVERVIEW

FUNCTION KEY (RED AND BLUE TWO-COLOR LIGHT)

IMPORTANT REMINDER:

• Before installing the headset, please connect to your mobile phone according to the instructions in the quick user manual to test the sound effects and volume.
• If the sound effects and volume are significantly different after installing the helmet, please adjust the position of the speaker inside the helmet.

BASIC FUNCTIONS

STARTUP

• Press and hold simultaneously Talkback and function keys (The blue light will stay on for 3 seconds and then go out. After powering on, the blue light will flash slowly and wait for the next operation)

SHUT DOWN

• Long press at the same time Talkback and function keys (The red light stays on for 3 seconds and then turns off)

VOLUME KEY PLUS AND MINUS

• Long press the “+” key increase volume
• Long press “-” key reduces volume

MOBILE PHONE PAIRING

• Long press function key (The red and blue lights flash alternately)

BATTERY POWER BROADCAST

• In power-on state
• Long press at the same time
• Function keys and “-” sign key

SWITCH BETWEEN CHINESE AND ENGLISH

• In shutdown state
• Long press at the same time
• Function keys and “+” sign key 6 seconds
• (The red light flashes 3 times and then goes out)

VOICE ASSISTANT

• Click the voice assistant key

AUTOMATIC ANSWERING FUNCTION

• In power-on state
• Long press at the same time
• Intercom key and “-” sign key
• (The blue light stays on for three seconds when turned on. The red light stays on for three seconds when it is turned off)

MUSIC FUNCTION

• PAUSE/PLAY MUSIC
• SWITCH MUSIC
• AUDIO SHARING
  • In intercom mode pairing, click the “+” key and the “-” key at the same time to turn on/off audio sharing.

CALL FUNCTION

BLUETOOTH INTERCOM FUNCTION

TWO-PERSON INTERCOM MODE

• (Both User 1 and User 2 need to follow process 1.
• Let one of the machines operate according to process 2)

ACCESSORIES INCLUDED

1. STICKY BASE
2. CLIP STYLE BASE
3. SYNOPSIS
4. TYPE-C CHARGING CABLE
5. VELCRO
6. SOFT WIRE AND HARD TUBE MICROPHONE INTEGRATED STYLE HEADPHONES

FCC

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. Please read carefully before using the product And keep this instruction manual properly. This instruction manual also contains Instructions for use of accessories.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>