Lieno J80 Wireless Microphone User Manual
- June 16, 2024
- Lieno
Table of Contents
Lieno J80 Wireless Microphone
Product Information
Specifications:
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power: 120V AC
- Color: Black
Product Usage Instructions
Setup:
Before using the product, ensure it is placed on a flat, stable surface
near a power outlet.
Power On:
Plug the product into a 120V AC power source and press the power button to
turn it on.
Operation:
Follow the instructions on the display screen to navigate through different
modes and settings.
Maintenance:
Regularly clean the product with a soft, damp cloth and avoid using harsh
chemicals.
Storage:
When not in use, store the product in a cool, dry place away from direct
sunlight.
Frequently Asked Questions (FAQ):
-
Q: How do I reset the product?
A: To reset the product, press and hold the reset button for 10 seconds. -
Q: Can I use this product outdoors?
A: This product is designed for indoor use only and should not be exposed to outdoor elements. -
Q: What should I do if the product malfunctions?
A: If the product malfunctions, refer to the troubleshooting section in the user manual or contact customer support for assistance.
Introduction
Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade
recording output. Plug and play, no app required. Multiple uses: It can be
used in online live broadcasts, video Vlog shooting, program interviews,
recording, video teaching and other occasions. This product consists of three
parts: charging box, microphone transmitter and receiver (as shown in the
figure below, some models have no charging box, Based on the actual object)
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However. there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
ID Diagram
- Windproof Net
- Connection indicator light
- Mute indicator light
- Noise reduction indicator light
- Battery indicator
- Microphone Type-c charging port
- Microphone clip
- Key K1
- Key M
- Mobile interface
- Right indicator light
- Left indicator light
- Receiver charging port
- Charging box Type-C charging port
- Charging box indicator
How to use
-
Step 1: Connect the receiver to phone with port.
Note: oppo / vivo / iqoo / realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply) -
Step 2: Long press button K1 for 3 seconds, or remove it from the box. The connection indicator light will slowly flash, indicating successful startup.
-
Step 3: The indicator lights of the receiver and transmitter are always on, and the mobile phone turns on the camera for live broadcast Video and other APP can use microphone to pick up sound.
Special Note: For the use of port: there is no battery in receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through port.
About UI
Microphone Transmitter
Note: Remove from the charging compartment and automatically start the machine. Automatically shut down if there is no connection for more than three minutes. By default, the noise reduction and reverb functions are turned on when turned on.
Receiver
Packing List
Content of packing
- Microphone transmitter
- Lightning receiver
- Charging box
- Charging cable
- User manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>