Face Wheels JiangSu SMRTW01 Smart Wristband User Manual
- June 16, 2024
- Face Wheels JiangSu
Table of Contents
Face Wheels JiangSu SMRTW01 Smart Wristband
Wear it properly
The wristband is best worn after the ulnar styloid Adjust the size of the
wrist according to the adjustment hole; Buckle the belt buckle. The sensor
should be close to the skin to avoid moving.
Charge the bracelet
For the first time, make sure that the battery is in normal power. If the
power is not turned on normally, please connect the charger to charge the
device, and the bracelet will automatically turn on.
Install the bracelet app on your phone
Sean the QR code or go to the App Store, download and install the app System
Requirements: Android 5.0 or above; iOS 9,0 or above; Support for Bluetooth
4.0.
Device connection
- For the first time, you need to connect to the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.
- Open the phone app-›click to start scanning→ click on the device connection.
- After the pairing is successful, the APP will automatically save the Bluetooth address of the bracelet, and when the APP is opened or running in the background, it will automatically search and connect the bracelet
- Android mobile phone Please ensure that the APP runs in the background and that the mobile phone system settings are given all permissions such as running the background and reading the contact information.
Bracelet function description
- When the device is turned off, touch and hold the function button for more than 3 seconds to turn the device on.
- In the Bluetooth address interface of the bracelet, press and hold the 2-second wristwatch to turn off the phone. A short press will exit the shutdown.
- Bracelet reset device This function will clear all data of the bracelet (such as step counting)
- Under the power-on state, touch the short press function key to light up the screen.
- Whether the default clock page of the bracelet, press the short press function key to switch to view different pages, no operation default five-second screen
- Switch to the heart rate three-in-one interface to start the test, heart rate three-in-one interface 60s timeout automatically off-screen (heart rate and blood pressure needs bracelet hardware support)
Clock interlace
After syncing with the phone, the bracelet will automatically calibrate the
time.: Press and hold the standby interface for 2 seconds to switch the clock
interface to 24/12 hours. ( tracks Step)
Number of steps
Wear the bracelet and record the number of daily movement steps to view the
current real-time steps.
Distance
The distance of motion is estimated based on the number of walking steps.
Calorie
Estimate the calories burned based on the number of walking steps Heart rate, blood pressure, blood oxygen three-in-one After entering the heart rate three- in-one test interface for a few seconds, the current heart rate, blood pressure, and blood oxygen test results are displayed. This feature requires a wristband to support heart rate and blood pressure sensors.
Multi-sport mode
(Running Mode)
Under this interface, you can record the calories and duration of running.
(Skipping rope mode)
Under this interface, you can record the calories and duration of rope
skipping.
(Sit-up mode )
Under this interface, you can record the calories and duration of sit-ups.
( Sleep mode )
When you fall asleep, the bracelet will automatically enter the sleep-
monitoring mode: Automatically detect your deep sleep/shallow sleep/wake up
all night and calculate your sleep quality: Sleep data is only supported for
APP viewing.
Note: Wearing a bracelet to sleep will have sleep data and start to
detect sleep at 10 p.m. Sleeping 314 hours of sleep data will be synchronized
to the APP while sleeping.
Information mode
When the bracelet pushes multiple reminder messages, enter this interface to
View the last 3 message records.
APP function and settings
(Personal information)
Please set your personal information after entering the app. Settings →
Personal Information, you can set gender – age – height -and weight You can
also set your daily goal steps to monitor the daily completion (Application
push) of incoming, calls: In the connected state, if the call alert function
is enabled, when the call comes in, the wristband will vibrate and display the
name or number of the caller. (You need to give APP read address book
permission)
SMS notification
In the connected state, if the SMS reminder function is enabled, the bracelet
will vibrate when there is a text message.
Other reminders
In the connected state, if this function is enabled, when there is a message
such as WeChat, QQ, Facebook, etc., the bracelet will vibrate to remind and
display the content received by the app. (You can also view the last three
message records in the ring information menu). (You need to give the APP
permission to get system notifications. The wristband can display 20-40
words).
Other functions
Turn on vibration to set this function, When there is a call, message or other
reminder, the bracelet will vibrate. If it is closed, the bracelet will only
have a screen reminder without shaking to avoid disturbing it.
Tips for Android user’s
rights management and open all permissions.
(Alarm setting)
In the connected state, 8 alarms can be set. After setting, it will be
synchronized to the bracelet; an offline alarm is supported, After the
synchronization is successful, even if the APP is not connected, the bracelet
will be reminded according to the set time,
(Looking for a bracelet)
In the connected state, click the “Look for the bracelet” option and the
bracelet will vibrate.
(Remote photography)
In the connected state, start the photo from the wristband or the APP to enter
the remote camera interface, shake/turn the wrist/touch the bracelet, and
automatically take a photo after 3 seconds of counting down. Please allow the
APP to access the photo album to save the self-portrait photo.
(Sedentary reminder)
Set whether to enable the sedentary reminder function, you can set the
reminder interval, if you sit for a long time in the set time, the bracelet
will remind you.
(Raise your hand to brighten)
Turn this function on. When the wristband is in the state of the screen, lift
your wrist and turn the screen to yourself to light up the screen.
(Do not disturb mode)
Turn on the Do Not Disturb mode. You can set the Do Not Disturb period. During
the set period, the bracelet stops receiving notification messages to avoid
reminding messages.
(Device reset)
Setting this feature reset will erase all data in the bracelet (such as step
counting)
(Remove device)
Remove the device This feature will erase data and remove the device’s Basic
parameters.
Precautions
- Bathing and swimming should not be worn.
- Please Connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the bracelet to high moisture, high temperature, or very low temperatures for long periods
- The bracelet appears to crash and restart. Please check the phone’s memory information is clear and try again, or exit the APP and reopen it.
Component Introduction
- Host *Wrist strap
- Packing box and instructions
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>