HUROM H400 Series Slow Juicer Vitaminpower Instruction Manual

HUROM H400 Series Slow Juicer Vitaminpower

Product Information

Specifications:

• Model: H400 Series
• Intended Use: Home use only
• Warranty: Not included

Product Usage Instructions

Precautions for Safe Use:

1. Read all instructions before use.
2. Avoid contact with moving parts.
3. Always unplug the appliance before cleaning or assembling/disassembling parts.

Precautions During Use:

1. Do not let the cord hang over the edge of a table or counter.
2. Ensure the hopper is securely fastened before turning on the motor.
3. Turn the switch to the off position after each use and wait for the motor to stop completely before disassembling.

Power Switch Guide:

Always turn the appliance off and unplug it from the outlet when not in use.

FAQ

• Q: Can I use the juicer outdoors?
  • A: No, the juicer is not intended for outdoor use.
• Q: What should I do if food becomes lodged in the juicer?
  • A: Use the food pusher or another piece of fruit/vegetable to push it down. If this is not possible, turn off the motor and disassemble the juicer to remove the remaining food.

IMPORTANT SAFEGUARDS

1. WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:
2. WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. READ ALL INSTRUCTIONS.
3. TO PROTECT AGAINST RISK OF ELECTRICAL SHOCK, DO NOT PUT THE MAIN BODY (MOTOR) IN WATER OR ANY OTHER LIQUID.
4. THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY, OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY ARE CLOSELY SUPERVISED AND INSTRUCTED CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. CLOSE SUPERVISION IS NECESSARYWHEN ANY APPLIANCE IS USED BY OR NEAR CHILDREN. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.
5. TURN THE APPLIANCE OFF, THEN UNPLUG FROM THE OUTLET WHEN NOT IN USE, BEFORE ASSEMBLING OR DISASSEMBLING PARTS AND BEFORE CLEANING. TO UNPLUG, GRASP THE PLUG AND PULL FROM THE OUTLET. NEVER PULL FROM THE POWER CORD.
6. AVOID CONTACTING MOVING PARTS. DO NOT ATTEMPT TO DEFEAT ANY SAFETY INTERLOCK MECHANISMS.
7. DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR PLUG, OR AFTER THE APPLIANCE MALFUNCTIONS, OR IS DROPPED OR DAMAGED IN ANY MANNER. RETURN APPLIANCE TO THE NEAREST AUTHORIZED SERVICE FACILITY FOR EXAMINATION, REPAIR OR ELECTRICAL OR MECHANICAL ADJUSTMENT.
8. THE USE OF ATTACHMENTS NOT RECOMMENDED OR SOLD BY THE MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK OR INJURY.
9. DO NOT LET CORD HANG OVER EDGE OF THE TABLE OR COUNTER.
10. ALWAYS MAKE SURE THE HOPPER IS SECURELY FASTENED IN PLACE BEFORE THE MOTOR IS TURNED ON. DO NOT UNFASTEN HOPPER WHILE JUICER IS IN OPERATION.
11. BE SURE TO TURN THE SWITCH TO OFF POSITION AFTER EACH USE OF YOUR JUICER. MAKE SURE THE MOTOR STOPS COMPLETELY BEFORE DISASSEMBLING.
12. DO NOT PUT YOUR FINGERS OR OTHER OBJECTS INTO THE JUICER WHILE IT IS IN OPERATION. IF FOOD BECOMES LODGED IN THE OPENING, USE FOOD PUSHER OR ANOTHER PIECE OF FRUIT OR VEGETABLE TO PUSH IT DOWN. WHEN
13. THIS METHOD IS NOT POSSIBLE, TURN THE MOTOR OFF AND DISASSEMBLE JUICER TO REMOVE THE REMAINING FOOD.
14. DO NOT USE OUTDOORS.
15. DO NOT PLACE ON OR NEAR A HOT GAS OR ELECTRIC BURNER OR IN A HEATED OVEN.
16. DO NOT USE THE APPLIANCE FOR OTHER THAN THE INTENDED USE

Before Reading Manual

1. Read ‘Precautions for Safe Use ‘ (p. 04~05) and use the appliance properly.
2. After reading the manual, keep it in a convenient location for future reference.
3. Do not use it abroad which has a different power supply and voltage.
4. Any quality improvements is subject to change without notice.

Precautions for Safe Use

1. You should read
2. You should follow
3. Precautions are classified as follows.

Warning A violation of any of the warning marks may cause a serious injury or death.

• Do not insert or pull the power cord with wet hands.
• Use the right voltage only as specified on the warranty card and the product specifications. Failure to follow this instruction may result in electric shock, fire, or performance impairment. Connecting to a different voltage may shorten the motor’s lifespan or cause malfunction.
• Securely insert the power cord plug all the way into an outlet. Do not bend, tie, damage or pull the power cord by force, or place it near a high temperature or heat such as a gas stove. Also, do not place any heavy object on top of the product, wedge it into a narrow space, or alter it.
• Do not remodel it under any circumstances. Also, do not attempt to dismantle or repair it yourself.
• Do not insert any foreign objects such as a finger or iron pin into any crack or hole in the product body. It may cause a fire, electric shock, injury and/or malfunction. For after-sales service and maintenance of a product, contact the HUROM Customer Service  Center.
• When the power plug is damaged, do not repair or remodel it yourself and, instead, visit an after-sales service center or branch store.
• Do not get wet or splash water on the product body. Make sure that no water or foreign material goes into the product’s power switch.
• Do not control the power switch with wet hands. For safety, ground the power outlet at all times. Also, do not ground it to a gas pipe, plastic water pipe, or telephone line. Make sure to use a grounded outlet.
• Do not attempt to dismantle any parts of the chamber set or insert foreign objects such as a finger or spoon into the inlet or juice outlet during operation.
• Do not use it within children’s reach. Children should be carefully supervised so that they do not play with this device. There is a risk of an injury or malfunction if children accidentally hit and knock it down.
• A person who is not familiar with handling the product should not use it him/herself. Anyone with physical or mental problems or who lacks experience and knowledge should not use it without a supervisor present.
• Do not use the product while wearing or holding any items with magnetic force (e.g. magnetic bracelets). Placing magnetic objects near the product may cause malfunction.
• Caution A violation of any of the caution marks may lead to serious injury or death.
• Do not operate the product unless the product body set and chamber set are securely connected.
• If there is a gas leak, etc., do not touch the power cord but, instead, open the windows and thoroughly ventilate the area.
• If the squeezing screw stops spinning during normal operation, press the “REV” button and hold for 3 to 5 seconds to activate reverse rotation. After reverse rotation stops completely, press “ON” button again to resume normal operation. If the screw continues to stop during the operation, the parts may be damaged or performance may be impaired due to overheating in the motor. When such a problem continues, stop using the product and contact our local customer service center.
• Do not move the product body, or disassemble or assemble the chamber set or parts during operation. Make sure to stop the operation and pull out the power cord beforehand.
• When using the product, be careful so that a tie, long necklace, scarf, etc. doesn’t get into the inlet.
• Place this product on an even and stable surface for use.
• When inserting ingredients into the inlet, do not use a chopstick, spoon, any hard object or anything other than the pusher.
• Do not use the product for more than 30 minutes continuously each time. It may overheat the motor to cause malfunction. To operate it again, completely stop the device for about 5 minutes before use.
• Do not exert any excessive shock to or drop the product.
• If the device produces any unusual sounds, excessive heat or smoke, stop using it immediately and contact the Customer Service Center.
• The smell experienced when using a new product will naturally go away over time.
• Pull the power cord plug from the outlet when it is not in use. Also, when pulling the power cord, make sure to grab the plug to pull it.
• Do not clean the product at a temperature of 80°C or higher. Do not place it in a dishwasher, dryer, microwave, etc. It may cause malfunction and/or deformation of parts.
• The product weighs approximately 6.7 kg. When moving the product, make sure to securely hold the product body with both hands. If you move it by holding just the chamber or the sides of the product body, the body may fall to cause a bodily injury or malfunction.
• Do not use this household-use product for commercial purposes. Excessive extraction of a large amount of ingredients may cause damage to the parts. In case it is to be used for commercial purposes, please contact the Customer Service Center on the method  of use.

Precautions During Use

• Make sure to thoroughly understand how to prepare ingredients and prepare them properly before inserting them.
  • Poorly prepared ingredients may hinder the extraction process and/or cause damage to the product.
• Ingredients in need of extra care
  • When using soft ingredients alone such as bananas, ripened kiwi and tomatoes, the juice may stagnate inside the chamber, which can make juicing difficult. Please add other ingredients that are not too soft.
  • When inserting walnuts, peanuts, almonds, sunflower seeds, pine nuts, beans, etc., add only a small amount or add them with other ingredients after soaking them in water.
• Ingredients unable to be juiced
  • Do not insert ingredients that cannot be juiced such as sesame seeds, coffee beans, Chinese peppers, tree barks and pine needles. Do not insert mudfish, eels, shrimp, marsh snails, squids, etc.
  • Do not insert fruits soaked in alcohol, honey or sugar (grapes, raspberries, mulberries, etc.) and enzymes (glasswort, rock pine enzymes, etc.).
  • Do not insert ingredients whose attributes make them difficult to be juiced such as silverberries, aloe, cactus, quince, yams, kudzu root, sugar cane, acorn and dandelions.
  • Do not insert boiled ingredients such as boiled potatoes and sweet potatoes.
  • Do not insert ice made by freezing water.
• It is recommended that you consume extracted vegetable juice immediately, if possible, and do not refrigerate it for a long period of time.
• Do not use this product for pulverizing grains. It may cause damage or malfunction.
• Do not re-extract juice from pulp that has already been juiced.
• Do not conduct any idle run of the product before inserting any ingredients.
• Do not insert ingredients into the hopper above the guided limit mark.
• Do not use it for more than 30 minutes continuously.
  • It may overheat the motor to cause malfunction. However, when using it continuously, pause the operation and use it after a break of over 5 minutes.
• Do not insert a chopstick or spoon into the juice/pulp outlet during operation.
• When inserting ingredients, do not use anything other than the pusher. It may damage the parts or cause a bodily injury and/or malfunction.
• Do not operate the power switch with wet hands.
  • It may cause electric shock, short circuit and/or fire. Do not get foreign substances on or near the power switch.
• Use it with the juice cap open.
  • The juice can flow backwards into the hopper if the juice cap is closed while juicing.
• Do not use when there is a large amount of water or vegetable juice in the upper section of the body.
• When extracting in large amounts for multiple times, frequently empty out the pulp cup located in the back of the product.
  • If the pulp cup is not emptied, it may be pushed out or the product operation may stop.
  • Pulp may drip onto the body when detaching the chamber after juicing is complete.

Note

1. Withered ingredients, which have been stored for a long time in the refrigerator, or frozen fruits may produce only a small amount of juice or none at all.
2. If the product is not cleaned immediately after use, the pulp may dry up, which makes it difficult to disassemble and clean it and also cause performance impairment. So, if possible, clean it immediately after use.

Power Switch

Press and hold the switch for the product operations.

Precautions Before Juicing

• If you have an allergy, make sure to select proper ingredients for your body when preparing the ingredients.
• For the method of and notes on using the device for each ingredient, please refer to the recipe book.
• Prepare ingredients in sizes able to be inserted into the hopper. If you want to juice a large volume or perform fast juicing, cut the ingredients into smaller pieces before inserting them. For about 1 kg, repeat the “disassemble and clean after juicing” step for use.
• Do not insert ingredients into the hopper above the guided limit mark.
• When juicing soft fruits, the juice of the ingredients may stagnate inside the chamber.
• When juicing fibrous fruits and vegetables, the juice may thicken.
• Inserting the following ingredients, which are impossible to be juiced, may lead to damage or malfunction.
  • Ingredients that cannot be juiced such as sesame seeds, coffee beans, Chinese peppers, tree barks and pine needles, as well as mudfish, eels, shrimp, marsh snails, squids, etc.
  • Fruits soaked in alcohol, honey or sugar (grapes, raspberries, mulberries, etc.) and  enzymes (glasswort, rock pine enzymes, etc.)
  • Ingredients whose attributes make them difficult to be juiced such as silverberries, aloe, cactus, quince, bananas, yams, kudzu root, sugar cane, acorns and dandelions
  • Boiled ingredients such as boiled potatoes and sweet potatoes
  • Ice made by freezing water
  • Do not use it for pulverizing grains.
  • Refer to the instructions in ‹Precautions During Operation> (refer to p. 5).

Multi-screw

• As certain ingredients need extra care during preparation, please refer to the following instructions on how to prepare the ingredients.
• When juicing several times or in bulk, make sure to cut ingredients into small pieces, and then repeat the “disassemble and clean after juicing” step.
• For faster juicing, mince the ingredients into fine pieces.

Citrus fruits

Grapefruit, oranges, lemons, etc.

Prepare the ingredients by peeling and cutting them into smaller pieces to fit in the hopper inlet. Remove all hard, unchewable seeds before insertion.

Fruits with thick peel

Pineapples, dragon fruit, melons, watermelons, pomegranate, etc. Prepare the ingredients by peeling and cutting them into smaller pieces to fit in the hopper inlet. Remove all hard, unchewable seeds before insertion.

Seeded fruits

Grapes, apples, peaches, persimmons, plums, cherries, pears, Korean melons, etc. For ingredients containing hard, unchewable seeds or large-sized seeds such as those in peaches, make sure to remove the seeds first and cut and prepare only the flesh. Hard seeds may stop the operation or damage the parts. Apple seeds contain toxicity so remove them as much as possible. For grapes, pluck each grape from the bunch after cleaning them thoroughly. Do not extract only the ingredients that are too soft; instead, mix them with other fruits and vegetables.

Soft fruits

Single extraction (berries, cherry tomatoes, pineapples, etc.)

• Thoroughly clean and cut the ingredients into small pieces that can fit in the hopper inlet. For fruits and vegetables with stalks, remove the stalks first. Mixed extraction (strawberries, kiwi, bananas, tomatoes, mangoes, etc.)
• For dry and viscous ingredients, mix them with other ingredients for extraction. Remove the peel and stalks, and also remove seeds, if there are any.

Root vegetables

Carrots, beets, ginger, sweet potatoes, potatoes, garlic, etc.

Wash the ingredients in running water to remove dirt and other foreign substances. For fibrous ingredients such as ginger, peel the outer skin and cut them into small pieces. For long ingredients, cut them vertically for extraction.

Leaf and stem vegetables

Celery, kale, cabbage, water parsley, wheatgrass, chives, etc.

Cut the ingredients into 3-cm or shorter pieces for extraction. Since leaf and stem vegetables are rough and fibrous, they are not easily juiced and can get caught in the Multi-screw.

• When juicing ingredients other than root, leafy and stem vegetables, the juice may stagnate.

Frozen fruits

Fruits with thick peels, such as watermelons and melons

Peel the outer skin and cut the ingredients into smaller pieces to fit in the hopper inlet before freezing them.

Seeded fruits, such as mangoes, peaches and grapes

Use only frozen, seedless fruits. For fruits that have hard, unchewable seeds, such as mangoes, peaches and lemons, make sure to remove the seeds and then freeze them before use. For grapes, freeze the seedless kind for use.

Soft fruits and vegetables, such as bananas, strawberries, kiwi and tomatoes)

Peel bananas, kiwi, etc. completely and cut them into pieces that are 3 to 4cm-long that can fit in the inlet before freezing them. For cherry tomatoes, strawberries, etc., remove the stalks and then freeze them.

• It is used to make slushes, smoothies, ice cream, etc. that use frozen fruits.
• Cut the fruits into 2-cm pieces and freeze them before use.
• Never use it for crushing or grinding ice or other ingredients.
• The product may stop if an excessive amount of ingredients or bulky pieces are inserted at once so be sure to insert a small amount at a time (into the additional inlet).

How to Assemble

1. Place the bottom part of the multi-screw ®) into the chamber (5), insert the top part of the multi-screw (3) as shown in the image, and then firmly press the assembled multi- screw set.
2. ssemble the hopper cover (-1) on the hopper (2-1) vertically.
3. Assemble in a way that the assembly guide mark of the chamber (2-3) and assembly guide mark of the hopper (5-2) are perfectly aligned.
4. Turn the installed hopper clockwise up to the assembly guide mark. If the internal parts are not assembled correctly, the hopper will not close.
5. Check if the pulp outlet cover and the latch (5-9) are closed correctly.
6. Lift the pulp outlet cover upward to close it and hook the latch.
7. If the packing is incorrectly assembled or the latch is not properly closed, the pulp outlet cover may open or juice may leak during extraction.
8. Check if the juice pulp outlet cover and latch are correctly closed.
9. Lower the juice pulp outlet cover downward to close it and hook the latch.
10. If the packing is incorrectly assembled or the latch is not properly closed, the pulp outlet cover may open or juice may leak during extraction.
11. Place the correctly assembled chamber set onto the product body (6). Assemble the chamber set first and then install it on the product body.

Assembly and Disassembly of Silicone

• Silicone packings are consumables that are recommended to be replaced once every 6 to 12 months. They are available for purchase through the Customer Service Center. (The juicer may leak if the product is not assembled properly.)

Extraction Packing

Seal Packing

1. Hold and take out the packing as if you are pulling it back.
2. After cleaning, insert one side of the
3. Pace the perine, pariano press

Juice outlet cover packing

1. Hold and take out the packing as if you are pulling it back.
2. After cleaning, insert one side of the
3. Insert there main part and press down the perimeter.

Juice Cap Packing

After cleaning, insert the packing so that the round part of the packing faces outward and the lattice grid faces upward.

Hopper Packing

Screw Packing

1. Pull one side of it to detach it downward
2. Erectile oft, hack the and insertitom upward as it you hook it at the bottom part of the multi-screw.
3. After checking the direction, thoroughly press the remaining part of the packing down to assemble it without any folded sections.

How to Use

1. Open the hopper cover.
2. Pull the hopper cover lever to open it. Inserting an excessive amount of ingredients may exert severe pressure on the product.
3. Add ingredients only up to the limit mark of the hopper.
4. For soft ingredients, mixing them with other ingredients for extraction.
5. Close the hopper cover and keep the juice cap open.
6. Before pressing the ON button, put the juice container in place.
7. The juice may flow backwards into the hopper if the juice cap is closed during extraction. If the juice does not come out even after opening the juice cap, open the hopper cover and empty out the contents.
8. Press the power switch briefly to start operation.
9. The “click” sound during the operation of the product is the sound of the chamber set and the motor being locked together.
10. To add more ingredients during operation, use the additional inlet or open the hopper cover.
11. When the hopper cover is opened, the operation stops.
12. Do not use anything other than the designated pusher.
13. In case the Multi-screw spins but the ingredients fail to be ground in the hopper during extraction, use the pusher to press the ingredients down.

When Multi-screw Stops During Use

1. Press and hold [REV] button for 3 to 5 seconds and release the button 2 to 3 times. [REV) button pushes the ingredients back up to dislodge. Reverse rotation continues only when the button is pressed while the screw stops when the button is released.
2. After reverse rotation stops completely, press the [ONI button to run operation. When pressing the (ON/Extract) or [REV/Reverse] button, make sure to press it after the screw stops moving completely.

Note

If the machine does not work even after following the above steps, pull the power cord plug from the outlet, detach the chamber set, wash it and use it again. Due to its characteristics, the motor will not stop at once but, instead, continue to spin slowly in the direction ofoperation before coming to a complete stop.

How to Disassemble and Clean

• After the product stops operating completely, pull the power cord plug with dry hands. Even \after the product is stopped, the motor will slowly come to a stop so wait about 3 seconds before detaching the chamber set.

  1. Detach the chamber set from the product body. Turn the hopper to open it and then sequentially pull each of the parts to disassemble them.
  2. Wash the parts with a cleaning brush under running water.
  3. Open the pulp outlet cover, juice outlet cover and juice cap to clean the chamber.
  4. Wipe the product body with a damp towel or soft cloth.
  5. Detach and wash silicone packings after use.
     • Residue may still be stuck. (Hopper packing, juice cap packing, extraction packing, seal packing, chamber packing, juice outlet cover packing)
  6. You can sterilize the parts by soaking them in warm water diluted with baking soda, citric acid or vinedar.

• Failure to clean the product immediately after use may cause its stainless steel parts and other parts to corrode or become discolored due to salt and pulp from the ingredients. Also, contaminants may be dried up and stuck inside, which makes it difficult to disassemble and clean them and may also cause performance impairment. Be sure to clean and air- dry it completely immediately after use and store it in a clean place. For long-term storage, use a cleaning brush to wash it. Do not clean with boiling or high-temperature water or use a cleansing sponge, steel sponge, abrasives and other sharp cleaning tools. Do not place it in a dishwasher or dish dryer.

Before equesting Repair

Check the following before asking for repair. For follow-up service and any inquiry you may have while using the product, please contact our Customer Center, or homepage at http://www.globalhurom.com Check the manufacturer’s number or the number under the barcode when requesting for follow-up service or parts.

References

• operation.be
• globalhurom.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>