pitpat Dog GPS Tracker PP04 User Manual
- June 3, 2024
- pitpat
Table of Contents
pitpat Dog GPS Tracker PP04
Inside Packaging
Any questions?
We’re here for you. [email protected] 01223
967305.
Dog GPS Tracker (PP04)
December 2021
Intro
This document contains the product information necessary to support the compliance testing of the PitPat Dog GPS Tracker. It should be kept confidential to the fullest extent possible.
Technical Description
- Product name: Dog GPS Tracker
- Model number: PP04
- Brand: PitPat
- Company: Pitpatpet Ltd
- 5 Brooklands Avenue, Cambridge, CB2 8BB, UK
- Power Input: 2W (wireless Qi receiver)
- Radio: LTE-M only (no Bluetooth)
- Location: GNSS
- FCC ID: 2AGYZ-PP04
- IC: 21094-PP04
The product is a Dog GPS Tracker. It measures the location of the dog using GPS and communicates this to an app using NB-IoT or LTE-M.
Block Diagram
RF Exposure Information and Statement
The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of
tissue. Device types: PP04 (FCC ID: 2AGYZ-PP04, IC: 21094-PP04) has also been
tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use of the body is 0.791W/kg. This
device was tested for typical body-worn operations with the back of the
handset kept 0mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 0mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters,
and similar accessories should not contain metallic components in their
assembly. The use of accessories that do not satisfy these requirements may
not comply with RF exposure requirements and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0mm must be maintained
between the user’s body and the handset, including the antenna. Third-party
belt clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or approved antenna.