CHAMPION 201181 3500W Wireless Start Generator User Guide

CHAMPION 201181 3500W Wireless Start Generator

WARNING: Read the ENTIRE operator’s manual to become familiar with thefeatures of the product before operating.Failure to operate the product correctly can result in damage tothe product, personal property and cause serious injury or even death.

www.championpowerequipment.com
Champion Power Equipment 2022. All Rights Reserved. / Todos los derechos reservados.

Set Up

1. Open shipping carton.  Assembly > Unboxing

2. Remove brackets.  Assembly > Remove Shipping Support Brackets.

3. Attach wheel kit.  Assembly > Install Wheel Kit

4. Connect the battery. Assembly > Connect the Battery.

5. Attach the red battery lead to the positive red terminal on the battery. Repeat for the black negative battery lead.

6. Add oil. Assembly > Add Engine Oil.

7. Recommended: 10W-30, up to 20.3 fl. oz. (600 ml) DO NOT overfill.

8. Move the generator outdoors.
   Move generator to an open, outdoor area. Point exhaust away from people and buildings. Never run generator inside a home or garage.Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials. Mantenga todos los objetos por lo menos 5 pies (1.5m) del generador. El calor del silenciador y el gas del escape pueden incendiar objetos combustibles.

9. Add fuel. ° Assembly > Add Fuel DO NOT use E15 or E85.

10. DO NOT plug in any electrical devices.
    NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!

11. Turn the fuel valve “ON”.

Wireless Start.

1. Push the battery switch to the “ON” position.
2. Push the ignition switch to the “ON” position.
3. Press and release the “START” button on the remote control.

Electric Start

1. Push the battery switch to the “ON” position.
2. Press and hold the ignition switch to the “START” position.

Manual Start

1. Push the ignition switch to the “ON” position.
2. Move the choke lever to the “CHOKE” position.
3. Pull the starter cord.
4. Move the choke lever to the “RUN” position.

• Plug in. Operation > Connecting Electrical Loads.

Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

NEED ASSISTANCE OR HAVE A QUESTION?GIVE US A CALL.

• CHAMPIONPOWEREQUIPMENT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>