RainPoint HTP115FRF Smart Solar Irrigation System User Manual

USER MANUAL
Smart Solar Irrigation System
Model No. HTP115FRF

Welcome to the RAINPOINT family! Please read the manual before using to learn about the features and functions.

Contents in the box

lnner diameter of pipe:0.17″( > 1/6″)
Outside diameter of pipe: 1/4″
| Filter| 1| Filtering impurities from water
| Tubing End Caps| 3| Stop water flow at the end of the pipe
| Micro Drip Emitters| 10| Inserted into the soil to water the plant root directly
| Straight Barb Fitting| 3| Connecting water pipes
| T Barb Fitting| 10| Split water and connect pipes
| Cross Barb Fitting| 3| Split water and connect pipes
| Check Valve| 1| Prevents water from backing up in the pipes back to the pump
| Adjustable Valve| 15| Adjust or shut off water flow in tubing runs

Introduction

2.1 Product Overview

2.2 Specification

• Flow Rate: 30L/H (7.93 GAL/H)
• Pumping Head≥3 M
• Working Pressure≥0.3 bar (4.3 PSI)
• Working Temperature: 3℃~50℃ (37℉~ 122℉)
• Work with 2.4G Wifi or dual band Wi-Fi
• Waterproof Level: IP54
• Inlet and Outlet are suitable for 4 mm pipe
• 2600mAh rechargeable 18650 lithium battery, charging by USB charging cable or top solar panel.
• 5V 1.5W Solar Panel

2.3 Product Features

• Real-time to set and view irrigation plan by remote control via APP.
• Build-in water pump for automatic watering.
• 24h delayed irrigation function.
• Efficient solar power supply.
• Water shortage alert.
• No water tap needed.
• Waters up to 10 plants.
• Flexible micro-drip irrigation system.
• Full DIY irrigation system, coming with different accessories.

Connection And Installation

https://www.youtube.com/watch?v=OLDCvBNOz_0&t=4s

Tips: Please scan the QR code or search the link to access the video to easily and quickly view the operational details of the device.
Video Address:https://www.youtube.com/watch?v=OLDCvBNOz_0&t=4s

3.1 Pump Connection
This device is a sub-device, please connect the hub of Rainpoint Smart series before connecting this device.

1. After the hub is successfully connected. select the button on the top right corner of the APP home page to add device, or you can go to the hub’s home page and use＂Add Devices＂ to add devices.
2. Enter the “Add Device” page, click on , or click on  in the upper right corner, scan the QR code in bottom of the manual or on the device to connect to network.
3. Hold the ＂SET＂ button on the side of the pump until the red LED light quickly blinking. Then select ＂Next＂ on the APP to start searching device.
4. Keep the device and the hub close to each other so they can connect automatically.
5. Besides that, you can also hold the button to reset and reconnect if you fail to connect for the first time.

3.2 Pump Installation

1. Cut the hose according to the distance of the device the plant or you need.
2. Connect the hose to water inlet and outlet.
3. Connect the check valve to the water outlet near the pump. Using a check valve may reduce water pressure. (The check valve must be installed correctly in accordance with the flow direction)
4. Insert the other end of the hose connected to the water inlet of the pump with the filter, and then put it into the container.
5. Connecting the suitable barb fitting：

1. If only the hose needs to be connected, you can use straight barb fitting.
2. When you need to connect the hose while splitting to two ways, you can use the”T” barb fitting.
3. When you need to connect a hose while splitting to other 3 ways, you can use the cross barb fitting.

6. Connect the switch valve, you can adjust water flow rate for different plants. When water needs to be delivered to the soil, you need to use the micro drip emitters.
   Tips: Loosen the soil first, then insert the drips at least 3 inches deep, which will help water enter the plant roots.

7. Please install Tubing End Caps after water flows out from the end of the pipe to avoid air in the pipe so that the water can not flow smoothly to the end of the pipe.

APP Features And Functions

4.1 Device Home Page

1. Setting: Basic settings for the timing pump.
2. Pump Status Icon: Show the pump working status.
3. Solar indicator: Show the solar charging status.
4. Plan: To create and manage watering plans.
5. Irrigation: Manual watering.

4.2 Basic Setting
Find the icon on the top right corner of the APP home page to ＂Settings ＂ page. In the basic settings, you can check and manage the device information, such as name, interface and description. There are also some advanced settings you can set up for the specific functions: Default Duration Time: Set default watering duration for manual irrigation.
Pair the Soil Sensor: Pair with a soil sensor to display the data on the home page and activate the Stop irrigation plan humidity function.
Stop irrigation plan humidity: Set stop watering value of the soil moisture to protect the plants from over watering. All the plans will be stopped once the soil moisture gets over the value, and will go back to work when the moisture return below the value.
Water Shortage Calibration: Calibrate the current water state of the pump as the water shortage level.
Sensitivity of Water Shortage Detection: Adjust the sensitivity level if the water shortage alarm is too sensitive or not sensitive enough.

4.3 Plan Setting
Select Plan and start to create a new auto-watering plan. Set a watering mode first:
Press the icon on the top right corner of the ＂Irrigation Plan＂ page to set irrigation plan.
Start Time: Set the time when to start the plan.
Duration: Set how long to water for the watering plan.
Repeat: Set the watering frequency for the plan.

After finish setting, press the top right button save your plan and you will see a plan overview appears in the list. Use the button on the right to turn on or off the plan. Up to SIX plans that can be created. There is also a Plan Calendar for checking the overview of all the plans’ schedule.

4.4 Manual Watering
Select Irrigation in the home page to manually turn on a temporary irrigation plan with a settable time. Note: When you turn on manual watering, if there is a plan running now or there will be a plan starting during your manual water time, the schedule will be skipped for this time.

4.5 Solar Charging Notice
When the timing pump is getting charged by solar power, the solar indicator on the app will turn on as yellow.

Trouble Shooting

between pump and hub.
• Miss the searching time during connecting.
• The hub software low version.| • Stay close with the hub when connecting the pump.
• Try to start the device searching again first, and then hold the set button after the searching starting count down until red light blinking.
• Go to basic setting on the top right corner of the hub’s home page, and then check for the new versions in the
device information.
Pump no working or can’t pump water from container| • Impurities get into the pump and damage the pump.
• Pump broken due to falling or during transportation.| If the pump can’t work, or can’t pumping water, please contact customer service from where you buy in the warranty time.
Water leakage from the pump inlet or outlet| The pipe is not tightly inserted or not fully inserted.| Re-install the water pipe to make sure the pipe end is fully and tightly insert to the inlet and outlet.
Weak water flow comes out| • Too far away from pots and water containers.
• Air left in the end of pipe section.| • Move the pump closer to the plants and reduce the pipe length.
• When install the watering system, try to put on the pipe end caps when the water have fully fill the whole pipeline.
Hub can’t connect| • Not using 2.4GHz Wi-Fi.
• Incorrect Wi-Fi password.
• Too far from the router or too many obstructions that blocks the signal.| • Check and use 2.4GHz or dual band Wi-Fi to connect.
• Check again the password when connecting
• Try to stay close with the router when connecting the hub.

Precautions

• Please make sure to use 2.4GHz band Wi-Fi to connect to this product.
• Ensure that the solar pump can be fully illuminated for not less than one hour per day.
• Please tighten the pipe to the inlet and outlet when installing to avoid leakage.
• Try to place the pump higher than the water source to avoid siphon phenomenon.

Warranty Policy

RAINPOINT provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.

FCC Statement (FCC ID:2AWDBHTP115FRF)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Customer Support

If you find it difficult to set up and want to watch the setting tutorial video, please subscribe to our channel RainPoint on YouTube.
Or scan the QR code to visit the RainPoint channel on YouTube quickly.

https://www.youtube.com/channel/UC1E5mRVq717cXvRwTBLYXtg?app=desktop

If the app and the user manual don’t have what you’re looking for, and need some help about Rainpoint, please contact us by LOT NO.: XXXXXX (on the back of the device)
18650 Lithium lon Rechargeable Battery (3.7V 2600mAh)
This paper box is recyclable and reusable

Need Help ?
Scan the QR code for more help.https://www.rainpointonline.com/pages/support
or Email:support@rainpointonline.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>