Jartoo Baby Monitor User Manual

Jartoo Baby Monitor

Product Information

The Jartoo Baby Monitor is designed to provide parents with a reliable way to monitor their baby’s activities remotely. It consists of a camera unit and a monitor unit, offering features like two-way audio communication, night vision, temperature monitoring, and lullabies playback.

Specifications:

• Model: JT-VBM002 Jartoo Baby Monitor
• Made in: China

Product Usage Instructions

Getting Started
Charging & Powering Baby Monitor:

1. Connect the monitor adapter to the monitor and a power outlet.
2. Unplug the unit when its power indicator turns off, indicating a full charge.
3. Press and hold the Power button on the monitor to power on.

Powering Camera:

1. Connect the camera to a power source via the TYPE-C cable and camera adapter.
2. Slide the Power Switch on the camera to power on. Ensure the power indicator light is green.

Pairing the Baby Monitor & the Camera:
By default, one camera is paired with the monitor when manufactured. To add more cameras, follow the instructions provided in the manual.

Placing the Camera:
Position the camera at least 2m / 6.6ft away from your baby for safety reasons and optimal viewing.

Wall Mounting Camera:
Select the mounting spot keeping it out of reach of your baby.

1. Use screws and screw anchors for secure mounting.

Functions & Operations

• Monitor Interface Overview:
  The monitor interface displays various information including signal strength, camera zoom, temperature, and more. You can adjust settings such as speaker volume, brightness, and lullabies through the menu.

• Talkback Feature:
  Press and hold the Talk button to communicate with the camera. Release the button to stop. You can select different cameras if you have multiple set up.

FAQ:

• Q: How do I add additional cameras to my Jartoo Baby Monitor?
  A: To add more cameras, press the Pair Button on the new camera, navigate through the menu on the monitor, select “Add,” and the monitor will automatically pair with the new camera.

SAFETY INSTRUCTIONS

• Keep cord out of the reach of children (more than 3ft / 0.9m away) in case of STRANGULATION.
• NEVER place the camera or cord in or near the crib or playpen.
• NEVER mount the camera directly above the crib or playpen to avoid the risk of injury.
• Only use the AC adapters provided.
• Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
• Only use attachments and accessories specified by the manufacturer.
• Unplug this device when unused for long periods of time.

CAUTION

• NOT toys. Do not allow children to play with them.
• This product is NOT intended to replace the proper supervision of children.
• You MUST check your child’s activity regularly.
• This product is not intended for use as a medical camera and its use should not replace adult supervision.
• Unplug the product during lightning storms.
• Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that.
• Check the reception regularly. Test the camera before use and after changing the camera’s location.
• Clean the camera with a dry cloth only.
• Do not block any ventilation openings.
• Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.

PACKAGE CONTENTS

• Jartoo Baby Monitor & Camera (Model: JT-VBM002)
• Monitor Adapter (5V 2A )
• Camera Adapter (5V 1.2A)
• Micro USB Cable *2
• User Manual
• Warranty

PRODUCT DIAGRAM

Camera

1. Light sensor
2. Lens
3. Microphone
4. Power Switch
5. Power indicator
6. Microphone
7. Speaker
8. USB-C
9. Camera Antenna
10. Temperature Sensor
11. Mounting Hole
12. Pairing Button

Baby Monitor

1. Antenna
2. Volume Indicators
3. Power Indicator
4. Charging Indicator
5. Microphone
6. Talk Button
7. Zoom Button
8. Left Button
9. Up Button
10. Right Button
11. OK Button
12. Down Button
13. Menu Button
14. Back Button
15. Lolume Control
16. Power Button
17. Back Stand
18. Speaker
19. USB-C Port

Press and hold the Talk button to speak the camera. Press Power button to switch on/off the monitor screen. Press and hold the Power button 2 seconds to switch on/off the monitor.

GETTING STARTED

1. Charging & Powering Baby Monitor

2. Connect the monitor adapter to the monitor and a power outlet.

3. Unplug the unit when its power indicator turns off, indicating a full charge.

4. Press and hold the Power button on the monitor to power on

5. Powering Camera

6. Connect the camera to power source via the TYPE-C cable and camera adapter.

7. Slide the Power Switch on camera to power on. Make sure the power indicator light is green.
   Only use the power adapters included in the package. Do not place the camera and power cord within the reach of your baby.

8. Pairing the Baby Monitor & the Camera
   By default, one camera has been paired with the monitor when manufactured. When you power on the monitor and camera, the two will automatically pair. To add more cameras, press the Pair Button at the the camera, press Menu button, select through -> Add-> , and then the monitor will auto-pair with the camera.
   Once they’re paired successfully, the camera number with icon will be shown at the top left. Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart. · It is recommended to pair in the baby’s room, or wherever you intend to place the camera.

9. Placing the Camera
   Place the camera 2m / 6.6ft away from your baby for safety reason and for a better view when in night vision mode.

10. Wall Mounting Camera

11. Select the spot to mount the camera, keeping it beyond your baby’s reach.

12. Insert the screw (not included) pre-installed on wall into the mounting hole of the camera.
    It’s strongly recommended to use a screw and screw anchor. Don’t release the camera until you’re sure it is firmly mounted.

FUNCTIONS & OPERATIONS

Monitor Interface overview

Top Seatus Indications

1. Talkback
   Press and hold the Talk button to talk to camera and release to exit. When monitor on Under Split Screen Mode: Press Left / Right Button to select the camera (Camera 1 or 2) you want to talk to. Hold to talk and release to exit.

   • When you enter the talking mode, the icon will be shown on the monitor.
   • When it’s mute or the speaker volume is too low, you may not be able to hear the baby.
   • When you’re pressing the Talk Button, the camera will not transfer the sound to the monitor. Please release the button to listen to your baby.

2. Digital Zoom & Circulating

3. Under split screen mode, press Left / Right Button -> OK Button to select the camera (Camera 1 or 2) you want to view or zoom in.

4. Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third pressing of the button will restore to the original image.

5. Long press “OK” key for 3 seconds, the PTZ will cruise automatically twice, and then press“OK” key again to end the cruise.
   The current zoom level number will be shown with the Zoom icon on the monitor

6. Pan-n-Tilt
   When viewing the camera, press Left / Right / Up / Down Button to view at different angles, 108 degrees vertically and 350 degrees horizontally.

7. Night Vision
   The night vision is automatically activated in a dim environment. The camera has high-intensity infrared LEDs for picking up clear images in the dark. Black and white images can be captured within 6m distance.

8. Volume Adjustment

9. Use the volume + – button on the top of monitor to quickly adjust the volume

10. Or you can press Menu Button: Choose -> Button -> Left / Right Button to volume down / up
    When the monitor is mute, you may not be able to hear the baby.

11. Display Brightness Adjustment
    Press Menu Button: Choose -> Button ->Left / Right Button to adjust the brightness

12. Camera

13. Add Camera

14. Press Menu button, select through -> ADD -> to add a camera.

15. Press and hold the Pair Button on the camera for 3 seconds

16. Split Screen

17. Press Menu button, select through -> .

18. Then select two cameras (Camera 1/2/3/4) for Split screen display.

19. Once set, you can view two cameras at one time without delay. The sound of the two rooms will be switched every 15 seconds

20. Under Split screen mode, you can also press Left / Right Button -> Button to select one camera (Camera 1 or 2) you want to view or zoom in. Press the Button to return to Split screen mode.

21. View Camera

22. Press Menu button, select through -> Scan-> to view a camera.

    * If there are 2 or more cameras, select to cyclethrough the added cameras every 15 seconds.
    * Select the camera number (1/2/3/4) to view the corresponding camera.![Jartoo-Baby-Monitor- \(28\)](https://manuals.plus/wp-content/uploads/2024/06/Jartoo-Baby-Monitor-28.png)  

You can switch viewing different cameras; the current camera number will be shown with the Camera icon on the monitor.

4.  **Delete Camera**
  1. Press Menu button, select through -> to delete a camera.![Jartoo-Baby-Monitor- \(30\)](https://manuals.plus/wp-content/uploads/2024/06/Jartoo-Baby-Monitor-30.png)  

At least one camera shall be added. Do not delete all the cameras. If necessary, please add a new camera before deletion.

8. Alarm
9. Explanation:This function is to remind you of feeding your baby. OFF means you shut down the function; 3 hour means it reminds you every 3 hours and so on for the other options
10. Press Menu button, Choose -> -> Button.
11. Select the time you want. or set the hour and minute otherwise. When the alarm time is reached, a beep will be heard. Press OK Button to stop; otherwise it’ll keep beeping for 10s, beeping again in 1min, stops after it’s alerted 4 times.

  * When the timer is set, the Alarm icon will be shown on the monitor.
  * Before setting, please check that the monitor time is your current time.

9. Lullabies

10. Explanation: This function is to comfort baby when needed.

11. Press Menu button, Choose -> Button.

12. Select the lullaby you want. Select -> to play the lullabies in a loop, and press OK again to stop playing.

13. choose Left / Right Button to adjust the volume of the lullaby.
    The lullaby will automatically stop looping after 1 hour

14. Cry Detection

15. Explanation:

  * There are three options of Cry detection, LOW 78dB, MEDIUM 65dB and 60dB. LOW HIGH means the sound of Baby cry can be detected if it reached 78dB, and so on for MEDIUM and HIGH.
  * Setting “ off ” turns off the alarm sound in Cry Detection mode.
2. Press Menu button, Choose Cry -> Button.
3. Select the option you want. Press Button.![Jartoo-Baby-Monitor- \(40\)](https://manuals.plus/wp-content/uploads/2024/06/Jartoo-Baby-Monitor-40.png)  

When Cry Detection is turned off, the monitor will no longer emit an alarm sound, nor will it trigger a bright screen and icon alarm.

11. Temperature Alert
    The monitor will prompt too high (>35°C / 95°F) and too low (<0°C / 32°F)temperatures with the “HH” and “LL” icon, accompanied with a and a beep alert when the monitor is mute, you may not be able to hear the baby

12. Monitor Settings
    Press Menu Button, Left and Right Buttons, and then OK Button to set the monitor

13. Time setting: Set the current time by setting hour, minute, and AM/ PM.

14. Cry Detection: Automatically detect the baby’s crying,wake up the display screen,and send out a prompt tone; the sensitivity can be set to OFF, Low, middle or High

15. Warning volume: Select between Low, High, and Mute.

16. Temperature unit: Select between °C and °F.

17. Display (Screen auto-sleep time): Select between 1min, 2min, 5min, and Always on.

18. Language: English, French, German, Spanish, Italian

19. Reset: Press OK Button to confirm factory resetting screen; “confirm factory resetting screen” will be shown when restoring, and you can’t press any button to control the device during this period. The monitor will auto restart when it’s done.

20. Help: Check the email for customer service

SPECIFICATIONS

Screen

Camera

270 degrees horizontal (Left=135, Right=135)

Zoom| Zoom In (2X)

Zoom In (4X)

Auto-Pilot| 2 cycles
View Angle| 60°
Depth of Field| 1.5m to 8m
Night Vision| Black & White image, 2m clear range，up to 8m
IR LED| Non-visible IR LED with wavelength 940nm
Light Sensor| Yes
Two-Way Talk| Yes
Temperature sensor| Yes
Power Input| 5V/1.2A (1.5m long USB C cable)
Storage Temperature| -10°C ~ 55°C / 14°F – 131°
Operation Temperature| 0°C ~ 40°C / 32°F – 104°F

WARRANTY & CUSTOMER SERVICE

12 months warranty
Lifetime customer service (contacts on the monitor, and back cover of this User Guide)

TROUBLESHOOTING

1. Product not powering on?

   • Check that the camera and monitor are turned on.
   • Check the camera is connected to power properly (it cannot be charged; it’s power off once disconnected from power).
   • Check that the monitor is of enough battery (it’ll auto shut off when battery level icon flashes red slowly on the monitor).
   • Check the intactness of the power cable.

2. Baby monitor can’t connect with the camera?

   • Check whether the monitor is of low battery. Charge it in time to restore good connection.
   • Check whether the camera is well connected to power.
   • Check whether there are any large metallic objects including doors, refrigerators, mirrors, etc., are placed between the camera and monitor thus blocking the radio signals.
   • Check whether there’s any other 900MHZ product is used nearby , which may interfere the connection.
   • Check whether the camera is placed on a metallic table Or put it directly on the ground If nothing above is involved, please retry to restart the monitor or to repair the camera: press the Pair Button at the bottom of the camera, press Menu button, select through ->  , and then the monitor will auto-pair with the camera.

3. Too much noise?

   • Volume may be set too high. Press volume – button which is on the top of the screen to volume down
   • Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.
   • The camera may be too out of range. Please keep it within 10m / 32.8ft to the monitor.

4. The Video is not clear?

   • Make sure the camera lens and display screen are clean, otherwise you can use a lens cloth to wipe them.
   • Confirm that the camera is not obstructed around

5. Black and white pictures?
   Night vision LED may be ON. Please turn on room lights to force it out of the night mode.

6. Choppy videos?

   • Check whether the camera is near the monitor and that there’re no obstacles between them.
   • Adjust the monitor antenna to vertical position for better signal transfer.

Operating bands(Tx and Rx) and maximum power

• Frequency Band(s): 902MHz-928MHz(TX/RX)
• Maximum output power:
  • Jartoo Baby Monitor: 0.6266W
  • Jartoo Baby Camera: 0.4256W

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-stalled and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

• For Jartoo Baby Monitor:
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator & your body.

• For Jartoo Baby Camera:
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Email
Support@Jartoo.com

MANUFACTURER
Shenzhen Core Shadow Feiyang Technology Co.,Ltd.
Room 702,Building 11,Phase II(02-08 Plot),Tianan Yungu Industrial Park,Gangtou Community,Bantian Street,Longgang Distrct,Shenzhen.

www.jartoo.com

References

• Jartoo Innovation - Best Baby Monitor Camera & Electric Heated Blanket

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>