ALTEC LANSING IMW3100 Rockbox Xl2.0 Waterproof Wireless Boombox Instruction Manual

June 12, 2024
Altec Lansing

REGISTER YOUR PRODUCT

To receive news, exclusive deals, OTA or firmware updates, warranty information and more please register your product at

alteclansingsupport.com

IMPORTANT

PLEASE DO NOT RETURN TO STORE

If You’re Having Trouble. Were Here to Help!

Call us 24/7 at 1455-292-4087

E-mail us at supportgolteclansing.com or visit us at alteclansing.com

WELL COME

Thank you far Purchasing an

Altec Lansing product.

It’s our goal to make sure you are happy.

Share your happiness with our customer concierge.

follow us @alteclansing official

follow us follow us a @alteclansing

follow us @alteclansing official

12 Month Limited Warranty

All Altec Lansing products come with 12 month limited warranty from the date of its original purchase

24 Hour Customer Support

We love our customers, and we care about your experience with Altec Lansing. If you need assistance, please call us

at 1.855.292.4087 or

e-mail supporte@alteclansing.com

www.alteclansing.com

ROCKBOX XL2.0
WATERPROOF WIRELESS BOOMBOX
WITH LIGHTING EFFECTS

IMW3100


QUICK START GUIDE

In the Box

IMW3100 Rock Box XL2.0
Waterproof Wireless Boom box
With Lighting Effects

AC Adapter

A Closer Look

  Charging

4-5 Hours Full Charge

(red)= Charging

(off) = Charged

Total playtime : 20 hours “at volume 50% position”

Powering On/ Bluetooth Pairing   ![](https://manuals.plus/wp-

content/uploads/2023/08/60-7.jpg)

Ready to Pair Blue Slowly Flashing LED

True Wireless Pairing

Turn on the first speaker and connect It with a Bluetooth compatible device.

Turn on the second speaker and press the  button on that speaker.

Flashing Green = Pairing

Second Speaker

Press and hold the  button for 2-3 seconds on the first speaker. The first speaker will now connect to the second so they both play in sync. The Indicator LEDs
will illuminate green.
“To end TWS press & hold the power button on either speaker”

Solid Green = Paired

First Speaker

There are two modes:
Mode 1: Dual Stereo, both play stereo for parties etc.
Mode 2: Wide Stereo, one plays left and the other right.
Briefly press the  button to switch between the modes

Light Change Mode

To toggle between the different light modes:
Off
Mode 1: Slow transition color to color.
Mode 2: Multi color pulse to music.
Mode 3: Color fade and cycle.
Mode 4: Single color (select color by App).
Mode 5: Multi color bar-graph to music.
Mode 6: Multi color sweep.

For bottom strobe, Press & Hold “ ” button for 2 sec.
Pulse to music ON Turn ON blinking OFF Press & Hold ” ” button for 5 sec to turn all lights off.

Controlling Music

PRESS

Play/Pause

Volume Up

Volume Down PRESS & HOLD

Next Track

Previous Track

Reset

Disconnect Bluetooth: Short Press and device will beep.

Reset All Connections: Press & Hold for 10 seconds and device will auto power off.

All pairing information is reset,

Overall battery performance varies dependent upon use, settings and environmental conditions. For further information, please visit www.alteclansing.com

FOLLOW US ON

myalteclansing

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Sakar International Inc.

195 Carter Drive

Edison, New Jersey 08817, USA

855-292-4087

www.alteclansing.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Altec Lansing User Manuals

Related Manuals