FREEONE 96MAN0190-REV.47 All In One Battery Powered Personal Pa User Manual

FREEONE 96MAN0190-REV.47 All In One Battery Powered Personal Pa

Product Information

• CE approved
• Battery-powered personal PA system
• Compliance with EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS Directive 2011/65/EU and 2015/863/EU, WEEE Directive 2012/19/EU

Product Usage Instructions

Introduction:
Thank you for choosing a PROEL product. This battery-powered personal PA system is designed for professional applications. Please read this manual to understand all its features and performance capabilities.

Description:
The PA system features various controls on the main panel including sensitivity settings, reverb effects, EQ adjustments, channel levels, signal indicators, Bluetooth connectivity, stereo input, line output, a USB port for charging, and a power switch.

Main Panel Operations:

1. CH1/CH2 LINE/GUITAR/MIC: Set the sensitivity and impedance for channel inputs.
2. CH1/CH2 REVERB: Adjust the reverb effect level for channels.
3. CH1/CH2 LOW & HIGH: Control the low and high EQ for channels.
4. CH1/CH2/CH3 LEVEL: Adjust the level of channels.
5. CH1/CH2/CH3 SIGNAL: Indicates signal presence at inputs.
6. PAIR Button: Use to connect a Bluetooth device. Follow the instructions for Bluetooth connection.
7. STEREO IN (MINI JACK): Connects to computer/CD/DVD/MP3 players using a stereo mini jack plug.
8. LINE OUT (JACK): Provides an unbalanced line-level signal for connecting to another audio system.
9. USB PORT: Can be used for charging devices or service operations.
10. POWER Switch: Turn the loudspeaker on or off. Note charging behaviour for battery life extension.

Frequently Asked Questions (FAQ):

• Q: What is the Bluetooth connection range?
  A: The Bluetooth connection range is approximately 10 meters (33 feet).

• Q: How should I clean the product?
  A: Clean the product only with a dry cloth to prevent damage.

IMPORTANT SAFETY INSTRUCTIONS

Watch for these symbols:

• The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
17. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle.
18. The mains plug of the power supply cord shall remain readily operable.
19. This apparatus contains potentially lethal voltages. To prevent electric shock or hazard, do not remove the chassis, input module or AC input covers. No user serviceable parts inside. Refer servicing to qualified service personnel.
20. The loudspeakers covered by this manual are not intended for high-moisture outdoor environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture.
21. Keep loudspeakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultraviolet (UV) light.
22. The loudspeakers can generate considerable energy. When placed on a slippery surface such as polished wood or linoleum, the speaker may move due to its acoustical energy output.
23. Precautions should be taken to ensure that the speaker does not fall off a stage or table on which it is placed.
24. The loudspeakers are easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew and audience members. Caution should be taken to avoid prolonged exposure to SPL over 90 dB.

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

DECLARATION OF CONFORMITY

The product complies with:
EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS Directive 2011/65/EU and 2015/863/EU, WEEE Directive 2012/19/EU.

The product complies with:
S.I. 2016/1091 Electromagnetic Compatibility Regulations 2016, S.I. 2016/1101 Electrical Equipment (Safety) Regulations 2016, S.I. 2012/3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

• WARNING EN 55032 CISPR 32

This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference. Under the EM disturbance, the ratio of signal-noise will be changed above 10 dB.

LIMITED WARRANTY

Proel warrants all materials, workmanship and proper operation of this product for two years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing a receipt or invoice of the date of purchase and defect detailed description. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and the warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any “direct damage” or “indirect damage” caused by product defectiveness.

• This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately after unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex-warehouse” and shipment is at the charge and risk of the buyer.
• Possible damages to the unit should be immediately notified to the forwarder. Each complaint for package tampered with should be done within eight days from product receipt.

CONDITIONS OF USE
Proel does not accept any liability for damage caused to third parties due to improper installation, use of non-original spare parts, lack of maintenance, tampering or improper use of this product, including disregard of acceptable and applicable safety standards. Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and Local regulations. The product must be installed by qualified personnel. Please contact the manufacturer for further information.

INTRODUCTION

Thank you for choosing a PROEL product. Please take some time to read this manual to understand all the features of your system and take advantage of all its performance capabilities. All PROEL products are CE-approved and designed for continuous use in professional applications.

DESCRIPTION

FREEONEX is an all-in-one battery-powered personal PA system featuring multiple inputs and BLUETOOTH connectivity. Hosted in a compact, lightweight yet ultra-durable polypropylene cabinet with multiple aiming positions, it represents the perfect solution for musicians, DJs and general PA users. An array of three high-definition 2” HF speakers coupled with a powerful 6” LF woofer provides a consistent tonal balance, a strong output level over distance and a wide coverage of large audiences.

The state-of-the-art electronics include a sophisticated pre-amp section with a DSP processor and a powerful 150W + 50W Class D power amplifier. The built- in 2 mono + 1 stereo channel digital mixer allows to connection of two microphones or instruments and a stereo player, each one with independent level controls. A 2-band EQ and a studio-grade digital REVERB are also available for microphone/instrument inputs. The built-in BLUETOOTH connection allows you to stream high-quality audio from portable devices without the need for any cable.

The built-in Li-ion battery provides up to 10 hours of mains-free continuous operation, for maximum freedom of use.

MAIN PANEL

MAIN PANEL OPERATIONS

1. CH1/CH2 INPUT
   These are COMBO connectors that accept XLR plugs or JACK plugs.
   The balanced XLR input is wired as follows:

   • Pin 1 = shield or ground

   • Pin 2 = + positive or “hot”

   • Pin 3 = – negative or “cold”
     It accepts any MIC-level signal from a dynamic microphone connected using an XLR cable.
     The unbalanced JACK input is wired as follows:

   • Tip = + positive or “hot”

   • Sleeve = shield or ground
     This is a high impedance input that accepts a JACK plug from any instrument or line-level instrument like acoustic guitar, fiddle pickup, electric guitar and so on.

2. CH1 / CH2 LINE/GUITAR/MIC
   These switches set the optimal sensitivity and impedance of channel inputs between LINE, GUITAR or MICROPHONE.

3. CH1 / CH2 REVERB
   These potentiometers set the level of the CH1 / CH2 channel’s reverb effect.

4. CH1 / CH2 LOW
   These potentiometers set the CH1 / CH2 channels at low EQ.

5. CH1 / CH2 HIGH
   These potentiometers set the CH1 / CH2 channels with high EQ.

6. CH1 / CH2 / CH3 LEVEL
   These potentiometers set the level of CH1 / CH2 / CH3 channels.

7. CH1 / CH2 / CH3 SIGNAL
   These GREEN LEDs illuminate when a signal is present at the inputs.

8. PAIR button
   Use this button to link the BLUETOOTH device (tablet, smartphone and others).
   To connect a BLUETOOTH device:

   • If a device has been already previously associated, it is relinked automatically when the FREEONEX is turned on (if the BLUETOOTH is activated in the device): the BLUE LED remains lit steadily.
   • If the BLUE LED flashes, the FREEONEX is ready to be associated with the device: select FREEONEX in the BLUETOOTH menu of your device. Once the device is connected, the BLUE LED remains lit steadily.
   • If you want to reconnect a BLUETOOTH device, press and hold the PAIR button until the correspondent BLUE LED flashes, then select FREEONEX in the BLUETOOTH menu of your device.
     NOTE: the audio file types and quality playable with Bluetooth connection depends on the Bluetooth device used. The Bluetooth connection range is about 10 m (33 feet).

9. STEREO IN (MINI JACK)
   This is a MINI JACK (3.5mm) female connector that accepts a STEREO MINI JACK plug from Computer / CD / DVD / MP3 players. The MINI JACK is wired as follows:

   • Tip = positive signal of left channel
   • Ring = positive signal of right channel
   • Sleeve = shield or ground

10. LINE OUT (JACK)
    This female JACK connector provides an unbalanced line-level signal with a mix of all the inputs. Connect it to the input of another audio system or powered speaker.

11. USB PORT
    This USB port can be used to supply or recharge the user’s tablet/smartphone or for service operation.

12. BATTERY LEVEL
    This LED bar shows the battery level when the sound system is switched on.

    • LOW: This RED LED indicates that the residual power of the internal battery is lower than 50% of the capacity (the other LEDs are off). When this LED is on, connect your system to a main line.
    • 50%: this GREEN LED indicates that the residual battery power is between 50% and 75% of the capacity.
    • 75%: this GREEN LED indicates that the residual battery power is between 75% and 100% of the capacity.
    • 100%: this GREEN LED indicates that the internal battery is fully charged.

13. POWER switch
    Use this switch to power ON or OFF the loudspeaker. It is “ON” when the switch is in the “I” position.
    Note: if the unit is connected to the mains line, the internal supply circuit charges the battery also if the unit is switched off. To extend the battery life, the charging starts when the battery level is below 75% of the capacity, whether the system is on or off.

14. CHARGE LED

    • GREEN: indicates the equipment is connected to the AC power and the battery is fully charged.
    • RED: indicates the equipment is connected to the AC power and the battery is charging.

15. AC~ SOCKET
    Here’s where you plug in your mains supply cord. You should always use the main cord supplied with the device.

CONNECTION EXAMPLES

• The following images show some connection possibilities.
• Vocal mike, acoustic guitar and tablet or smartphone via bluetooth.

Vocal mike, electric guitar with pedals and personal computer with minijack connection.

As a personal monitor use a DI BOX to connect your instrument to a main mixer and FREEONEX, also using the second input to listen to the other musicians from an output of the main mixer.

POSITIONING EXAMPLES

The FREEONEX cabinet is designed to be used in several positions to obtain the best result for your application.

On the ground tilted backwards
For performances where your audience is close to you, tilt the FREEONEX onto its back edge and stand or sit to one side of the loudspeaker to avoid blocking the sound.

On the ground as a stage monitor
To use the FREEONEX as a personal stage monitor, place it on the ground horizontally, tilt onto its side edge and point toward the performer.

On speaker stand
For general-purpose sound reinforcement, you can place the FREEONEX system on a speaker stand (sold separately) at the level of the audience’s ears.

TECHNICAL SPECIFICATIONS

• System type 2-way vented enclosure with HF array
• High-Frequency Device 3 x 2” HF speakers
• Low-Frequency Device 1 x 6” woofer
• Frequency response (-3 dB) 60 Hz – 18 kHz
• Max. SPL 115 dB
• Coverage angle (H x V) 120° x 50°
• Total peak power 400 W
• HF continuous power 50 W class D
• LF continuous power 150 W class D
• Input Connectors 2 x XLR/TRS Combo (balanced) 1 x 3.5mm Jack Stereo
• Output Connectors 1 x 6.35mm Jack (unbalanced) 1 x USB type A Charge port
• Input Channels 2x MIC/LINE 1x LINE/BT
• Mic/Line Controls Reverb, Low, High, Level
• Stereo in/Bluetooth Controls Pair, Level
• Processing 32bit DSP, 24bit AD/DA
• Bluetooth 5.0, Audio Streaming
• Enclosure material Polypropylene
• Finish Black Textured
• Grille material Powder coated steel
• Handles 1 x top
• Mounting Pole 1 x bottom
• Dimensions (H x W x D): 320 mm x 240 mm x 290 mm 12.59 in x 9.45 in x 11.42 in
• Weight 7.5 kg 16.53 lb
• USB charging 2 A max
• Power Supply 100 – 240 V~, 50 / 60 Hz
• Consumption 150 W
• Battery type Rechargeable Lithium-ion 6000mAh
• Battery play time (at medium level) up to 10 hours
• Recharging time less than 4 hours

PROEL S.p.A.

• (World Headquarters – Factory) Via alla Ruenia 37/43 64027 Sant’Omero (Te) – Italy
• Tel: +39 0861 81241
• Fax: +39 0861 887862
• Web: https://soundsystems.proel.com/.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>