VANIR-1 Bluetooth Headset Instruction Manual
- June 10, 2024
- VANIR
Table of Contents
VANIR-1 Bluetooth Headset
Schematic Diagram
Basic Parameters
|
---|---
Features| Touch
Charging box voltage| DC5V
battery voltage| 3.7V
Bluetooth version| 5.1
Bluetooth distance| 10 Meter
Impedance Omu value| 32 Europe
Headphone battery capacity| 40 Milliampere hour
Charging box battery capacity| 350 Milliampere hour
Wear Instruction
Wear it correctly, L is the left ear, R is the right ear
Connection Instructions
Power-on pairing
Open the charging compartment and take out the headset, automatically power on and pair, or press and hold the function button for 3 seconds, the headset will be high light and accompanied bya beep.
Put the headset into the charger when using it for the first time.
Electric compartment, plug in the charging cable, plug the headset and charge
Warehouse full.
Device connection
Turn on the phone’s Bluetooth, then search for the VANIR-1 Bluetooth name and click connect.
Make sure the phone’s Bluetooth is turned on Equipment search VANIR-1
connection succeeded
Instructions
Binaural mode button function
Power On/Off : Press and hold the left/right ear for 2 seconds to power
on, long press for 3 seconds to power off
Volume plus : triple-dick the right ear to increase the volume
Volume down : three consecutive clicks on the left ear to decrease the
volume
Next song : Double-dick the next song with the right ear
Previous song : Double click the previous song with the left ear
Play/Pause : Click
Answer/Hang up : Click in the incoming call state (click again to hang
up)
Reject call : press and hold for 2 seconds in incoming call state
Breathing light on/off : After four consecutive taps on the left
ear/right ear, there will be a beep, and the breathing light will be turned
on/off
Voice Assistant : Press and hold the left/right ear for 2 seconds, and
there will be a beep to wake up Siri or voice assistant
LED light blinks
Power on : blue light on
Shutdown : no lights
Pairing : red and blue flashing alternately
Successful connection : no light
Music playing : the blue light is breathing and flashing
Music pause : no lights
Incoming call : blue light flashing
During a call : no light
Low battery : no light
Charging : the red light is always on
Fully charged : fully charged blue light on for 10 seconds and off
Change pairing, shutdown, charging
- Open the cover and take out the headset to automatically turn on, and it will automatically link to the last paired mobile phone.
- If you need to pair other mobile phones, please turn off the Bluetooth of the original mobile phone. When the Bluetooth headset is turned on,Other mobile phones can search for the device name by turning on Bluetooth.
- When the music is paused, the headset is in a sleep state and the power consumption is very low.
- When the headset is not in use, put the headset into the charging box, the headset will automatically shut down and replenish the battery. If the phone is not equipped with a charging box, the phone will disconnect Bluetooth, and the headset will automatically shut down after about 5 minutes.
Warranty Description
Dear Customer: Hello!
Thank you for your patronage of our company’s products.
In order to ensure your interests, please read the manual and the following
carefully after purchasing this product:
(The following conditions are not covered by the warranty.
The company can provide paid services, please note.)
- Failure to operate, use, and keep in accordance with the instruction manual will cause the product to malfunction and damage.
- Unauthorized alteration, tearing up the product packaging and barcode.
- Unauthorized changes to factory settings and disassembly repairs.
- Accidental factors or man-made damage to the product, such as input unqualified voltage, high temperature, water ingress, Damage, severe oxidation or rust of the product, etc.
- Failure and damage caused by force majeure, such as earthquake, fire, flood, lightning, etc.
Precautions
- Prolonged use of headphones may cause hearing damage, please arrange the use time reasonably
- Do not use unqualified chargers and high voltage current charging
- Do not throw it to avoid product damage caused by falling
- Do not disassemble, repair or modify this product by yourself
- Do not use chemical solvents to wipe this product
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could vold the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation Is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>