EVATOST WP1 Wireless Charge Watch User Manual

User Manual
Wireless watch charge
Model: WP1

WP1 Wireless Charge Watch

eVatmaster Consulting GmbH
Bettinastr.30
60325 Frankfurt am main, Germany
contact@evatmaster.com

EVATOST CONSULTING LTD
Suite 11,First Floor, Moy Road Business
Centre, Tiffs Well,Cardiff, Wales,CF 15 7QR
contact@evatmaster.com
OST_UK_20220715000002

Function introduction

1. Battery power indicator
2. Type C input 5V/1A
3. Wireless output 2.5W (iWatch)

Operating instructions

1. Press the power button to display the remaining power
2. Power input & output: Using Type C input connector to charge for power bank ,using wireless charger to charger for iWatch

Technical parameters
Battery type : Polymer battery
Executive standard: GB 31241-2014
Capacity : 1200mAh
Input: 5V/1A
Wireless output: 2.5W(iWatch)
Size: 504515mm
Weight: 38.5g

How to charge for power bank

1. Use the Type C charging cable to charge for power bank.
2. It is recommended to connect the power adaptor to charge for power bank.
3. It can be connected to the USB port of the computer to charge for power bank.
4.  While charging, the blue LED power indicator of the power bank blinks successively.
   When fully charged, the LED power indicator of the power bank is steady with blue color.

Charging for iWatch

1. Power bank is used to charge for digital products like iWatch.
2. Put the iWatch on power bank wireless charging area,then press the button to wait for 8 seconds, the power bank will be automatically charged for iWatch.
3. While charging for iWatch, the LED power indicator lights up with blue color.
4. After iWatch is fully charged, the power bank will be shutted down automatically within 30 seconds after disconnecting.

Note:

1. The charging time of this power bank is about 2-3 hours. The specific time is subject to the actual situation.
2. If the power bank cannot be charged or the iWatch cannot be charged, please check whether the connection cable is normal and firm, or whether the charging port accessories are suitable. It is recommended to use a regular brand power adapter to charge for power bank .
3. There is a conversion rate of power bank , so the capacity of power bank is not equal to the rechargeable capacity.
4. If the power bank cannot be turned on for short circuit protection due to improper operation, please charge the power bank to activate it.

Safety Information:

Warning: Failure to follow these safety instructions may result in fire, electric shock, damage or other injury.

1. Please try to keep the storage temperature of the product between 10-357C.
2. Do not fall, do not disassemble or puncture, repair the power bank by yourself.
3. Do not expose the power bank to fire, high temperature or water.
4. Stop using the power bank if you find any abnormal phenomena such as expansion or expansion of the charged device.
5. This device is not suitable for using by persons with immature physical, perceptual and mental abilities (including children), nor by persons lacking relevant experience and knowledge, unless supervised and guided by someone who is professionally responsible for their personal safety. Please control children to ensure that they do not use this device as a toy.
6. Do not leave the product in the car for a long time, especially when parked in the sun.
7. Do not put foreign bodies into the product interface.
8. Please charge your power bank at least once every three months.

The above information is for reference only and is subject to change without prior notice.

List of parts:

1. Power bank *1
2. Type C charging cable *1
3. User manual *1

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequence energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not  ccur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Made in China

Documents / Resources

| EVATOST WP1 Wireless Charge Watch [pdf] User Manual
2BCJZ-WP1, 2BCJZWP1, WP1, WP1 Wireless Charge Watch, Wireless Charge Watch, Charge Watch, Watch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>