SINBON AUTO-NACS01 Nacs Charging Cable Assembly Instruction Manual

SINBON AUTO-NACS01 Nacs Charging Cable Assembly

Specifications

• Model Number: A9604566
• Product Type: Charging Connector Assembly
• Compatibility: NACS vehicles
• Rated Voltage (Nominal): AC 240 VAC
• Rated Current: 80A
• Power: Customized
• Conductor Connection Method: 500 M
• Insulation Resistance: 100 drops at room temperature 1m
• Insertion / Withdrawal Force: 90N
• Flammability Rating: VW-1 for Cable, V-0 for All Plastic Parts
• Ambient Temperature: Customized
• Operating Temperature: Customized
• Maximum Elevation: NTC or PT1000
• Operating Humidity: Customized
• Protection Degree: UV Resistance
• Low Voltage Electrical Connector: Customized
• Low Voltage Electrical Terminal: Customized
• Temperature Sensor Type: NTC or PT1000
• Temperature Sensor Threshold: Customized
• RF Transmitter Frequency: 315MHz
• Cable Diameter: 19.5mm
• Cable Length: 5m, Others (Customized)

Product Usage Instructions

Installation:

1. Ensure the electric vehicle is turned off before installation.
2. Connect the charging cable assembly to the electric vehicle supply equipment.
3. Make sure the connectors are securely attached and locked in place.

Charging Process:

1. Plug the open cable end into the Tesla vehicle charging inlet.
2. Activate the charging process on the electric vehicle or charging station interface.
3. The built-in temperature sensor will monitor for overheating during charging.

Frequently Asked Questions

Q: Can this charging cable assembly be used with other electric vehicle models?

A: The NACS charging cable assembly is specifically designed for NACS vehicles and may not be compatible with other electric vehicle models. It is recommended to check compatibility before use.

Q: How do I clean and maintain the charging cable assembly?

A: Use a damp cloth to clean the connectors and cables. Avoid using harsh chemicals or abrasive materials. Regularly inspect the cable for any signs of wear or damage and replace if necessary.

Jiangyin SINBON Electronics Co., Ltd. 288 Chengjiang Middle Rd., Jiangyin, Jiangsu, China
Tel: +86-510-86404098
Fax: +86-510-86404940

Product Specification
NACS Charging Cable Assembly, Final 80A @ 240VAC
JUL 13 ,2023

PROPRIETARY DOCUMENT

The purpose of this specification is to define the scope of supply offered by SINBON. This document may not, in whole or in part, be duplicated or disclosed without the written permission of the SINBON Product Specification author.

Product Overview

• SINBON NACS Charging cable assembly with Vehicle connector and open cable end for charging electric vehicle and plug-in hybrid electric vehicle with alternating current by Tesla vehicle charging inlets, for installation at electric vehicle supply equipment, in accordance with NACS.
• The NACS 32A/40A/50A/65A/80A charging connector provides Level 2 or 3 charging solution for NACS vehicles. The connector is manufactured with a built-in temperature sensor for ver-temperature protection and a RF transmitter to remotely open charge port doors. The transmitter is available in two frequencies for regional compliance.

Applicable Standard

TS-0023666
North American Charging Standard
IEC 62196
Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles
IEC 61851
Electric vehicle conductive charging system

Product Feature

Technical Data

PERFORMANCE SPECIFICATION

• Model Number
  A9604566

• Product Type
  Charging Connector Assembly

• Compatibility
  AC

• Rated Voltage
  ( 240 VAC

• Rated Current
  80A

• Power Conductor Connection Method
  Customized

• Insulation Resistance
  ≥ 500 MΩ

• Rated Drop Resistance
  100 drops drops（Room temperature 1m 1m）

• Insertion / Withdrawal Force
  ＜ 90N

• Flammability Rating
  VW -1 For Cable
  V-0 for All Plastic Parts

ENVIRONMENTAL SPECIFICATION

• Ambient Temperature
  -40°C to +85°C

• Operating Temperature
  -40°C to +50°C

• Maximum Ele
  vation 3,000 m

• Operating Humidity
  95%@50℃, non-condensing

• Protection Degree
  IP67

• UV Resistance
  F1 per UL 746C

ELECTRICAL SPECIFICATION

• Low Voltage Electrical Connector
  Customized

• Low Voltage Electrical Terminal
  Customized

• Temperature Sensor Type
  NTC or PT1000

• Temperature Sensor Threshold
  Customized

• RF Transmitter Frequency
  315MHz

MECHANIAL SPECIFICATION

• Dimensions (Overall)
  46.5mm×72.1mm×213.9mm

• Cable Diameter
  19.59.5mm

• Cable Length
  5m, Other Others(Customized)

INSTALLATION INSTRUCTION

Service Terms

Whole Solution
SINBON could provide customers and cooperative partners with a whole solution of technical support, training, maintenance service, etc.

One-stop Service
SINBON could provide customers and cooperative partners with a one-stop service. All charging-related products purchased from SINBON are offered professional and guaranteed service for any problem caused due to product usage and quality.

Warranty
Two years from shipment / Accumulation 10000 charging cycles after initial use.
During the warranty period, products must be carried out on-site technical service due to product faults or quality defects (caused by abnormal or improper usage is not included), SINBON will promptly dispatch technical engineer to solve product malfunction for free.

FCC

FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
environment . This device has been assessed to be in compliance with SAR and/or RF field strength limits. The device can be used in the exposure condition without restriction.

ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for used on the car. The device has been evaluated to meet general RF exposure requirements.

References

• Solution Provider, Assembly Manufacturing | SINBON

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>