KOBB KBL35G 360 Degree Self-Leveling Cross Line Laser Level Instruction Manual
- June 3, 2024
- KOBB
Table of Contents
KOBB KBL35G 360 Degree Self-Leveling Cross Line Laser Level Instruction Manual
Product Overview
-
1 . Touch Panel
-
Battery Indicator
-
@ – Switch Horizontal Line
-
© -Switch Vertical Lines
– Manual Mode Power Button
– Pulse Mode Button -
Manual Mode Indicator
-
Pulse Mode Indicator
-
Laser Windows
-
Pendulum/ Transit Lock
-
Type-C Charging Port
-
Battery Compartment Cover
-
1 /4″-20 threaded mount
-
Lithium Battery
-
Type-C Charging Port on the Battery
-
Charging Indicator on the Battery
-
Remote Control
Safety Instructions
Please read thoroughly and comply with the Safety Instructions and User Manual before using this product. Failure to read and follow may void the warranty.
WARNING!
CLASS II LASER PRODUCT
COMPLIES WITH CFR 1040.10 AND 1040.11
Max. Power Output: < 1 mW
Wavelength: 505nm-520nm
LASER RADIATION:
DO NOT STARE INTO BEAM.
DO NOT DIRECT EYE EXPOSURE.
AVOID VIEW WITH OPTICAL INSTRUMENTS.
ATTENTION:
Read all instructions prior to operating this laser tool. Do not remove any
labels from tool.
- While the product is in operation, be careful not to expose your eyes to the emitting laser beam (Green/Red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
- Do not attempt to view the laser beam through optical tools such as telescopes as serious eye injury may result.
- Do not disassemble or modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
- Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.
- An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2seconds. Eyelid reflexes will normally provide adequate protection.
- The following label/print samples are placed on the product to inform of the laser class for your convenience and safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>