bBTechnology VIO-S115 3D Wirehouse User Manual

VIO-S115 3D Wirehouse
User Manual

Quick start user manual
Section 1
The warnings in this manual must be observed together with the “USER MANUAL – Section 2”.
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies- aeb.com

Thank you for choosing a dBTechnologies Product!

The VIO S115 is a versatile professional subwoofer. A powerful DSP can adapt the live or playback performances to different usage scenarios and all the sub-parameters can be controlled by the user in the rear panel.
The usage is optimized with X206 speakers, and a complete set of accessories allow to match some particular configurations, for example, among others, the line-array mounting with X206 100 models (see the related instructions for further information).
The RDNet connections allow complete remote control, thanks also to AURORA NET software, freely downloadable from the technologies website.
Check the site www.dbtechnologies.com for the complete user manual!

1) Unpacking
The box contains:
N°1 ViO S115
N°1 FUSE
N°1 Mains cable (POWER CON TRUE1)
This quick start and warranty documentation

Front side view

Rear side view

Among the mechanical design particulars we can find:
A) HANDLES (one for each side)
B) UPPER POLE MOUNT ADAPTER
C) LATERAL POLE MOUNT ADAPTER
D) AMPLIFIER
E) HOUSINGS FOR CABLES (useful in case of multiple stacked configurations)
Never use the handles to hang the subwoofer!

2) Connections and controls

All the connections and controls are in the amplifier the panel, on the side of the monitor:

1. Balanced Audio Input	8) Subwoofer delay

2. Output Link| 9) RDNet section
3. Sub attenuation| 10) Status LED
4. Control LEDs| 11) USB data service
5. Sub polarity selector| 12) Mains Input
6. Sub mode selector| 13) Mains Link
7. Xover frequency rotary| 14) Mains Fuse

a) Connect the audio input (1). Select the Sub attenuation (3), and the sub- parameters (5, 6, 7, 8)
b) If you need to link the S115 to another one, please use a cable with XLR connectors (not supplied).
Connect the Link output (2) of the first, to the balanced Input (1) of the second one.
c) In case of remote control, connect the proper Data Input (9) of the first module of the line array to the hardware remote controller (RDNet Control 2 or RDNet Control 8) with cables equipped with etherCON connectors. Then connect the Data Output (9) of the first module to the Data Input (9) of the second one, and so on. When your VIO X206 is on and the RDNet network is on and it has recognized the connected device, the LED “Link” (10) is on. The other LED (10) “Active” start blinking when there is the presence of data transmission, the “Remote Preset Active” advises that all the local controls set on the amplifier panel (DSP preset) are by-passed and controlled remotely by RDNet.
See also RDNet Control 2 and RDNet Control 8 user manuals for further information.
d) Plug properly the mains POWER CON TRUE1 cable (supplied) in the related input (12) to turn on the system.
If needed, connect the power link output (13) of the first module to the mains input (12) of a second VIO X206 (10). The maximum number of linkable elements is: 1+5 (220-240V~) or 1+3 (100-120V~)
www.dbtechnologies.com info@dbtechnologies- aeb.com

3) Optional accessories
The following accessories are presented also to show the usage of S115 together with loudspeakers X206. Some accessories could be not available at the date of publication of this document, please refer to the related accessories instructions and to the site for updates.
Check the complete user manual on  www.dbtechnologies.com for further information about the system and available accessories.

ANGLES 7,5° / 0° / +7,5° max 4 HWG
elements + 1 subwoofer. Use additional fastening means
| VIO X206 5115 FLYBAR COMPACT| DRK 1| STACK OR FLOWN USAGE
| VIO X206 5115 FLYBAR FULL| DRK 2| STACK OR FLOWN USAGE
| VIO X206 5115 RAIN COVER| RC 1| REMOVABLE RAIN COVER
| FUNCTIONAL COVER VIO 5115| FC S115| RAIN COVER THAT CAN BE MAINTAINED IN USAGE

Technical Data
Speaker Type: professional subwoofer
Acoustical Data
Usable Bandwidth [-6dB]:
Freq. response (-10 dB): 36 Hz – (user freq LFP)
Freq. response (-6 dB): 40 Hz – (user freq LFP)
MAX SPL (@1m) : 134 dB
LF Transducer: 15” neodymium (V.C: 4”)
Amplifier
Amplifier technology: Digipro G3
Amp Class: Class-D
RMS Power: 900 W
Peak Power: 1800 W
Cooling:
Operating voltage: 100-240V~ (50-60 Hz) FULL RANGE
Processor and user interface
Controller: 96 kHz processing DSP
Limiter: Peak, thermal, RMS
Controls: Sub attenuation, Sub parameters
www.dbtechnologies.com info@dbtechnologies- aeb.com
Rotary presets: 3 (10 positions)
AD/DA Conversion: 24 bit – 96 kHz
Input / Output
Mains: PowerCON TRUE1 IN/LINK
Signal Inputs: 1 x balanced XLR connector
Signal Out/Link: 1 x balanced XLR connector
RDNET connectors: yes
USB connector: mini USB B-type (for SERVICE DATA) Mechanics
Housing: Wooden Box
Grille: Full metal grille
Handles: 2x
Pole mount: 2x
Rigging point: 16 x M10
Width: 650 mm (25.6 in)
Height: 420 mm (16.5 in)
Depth: 550 mm (21.7 in)
Weight: 32.8 kg (72.3 lbs)

Download the complete user manual from the site: www.dbtechnologies.com/EN/Downloads.aspx

POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)
Draw at 1/8 of full power in average use conditions (*): 1.2 A (220-240V-) – 1.8 A (1.00-120V-) Draw at 1/3 of full power in maximum use conditions (**): 3 A (220-24oV-) – 4.9 A (100-120V-) Power absorption with the speaker turned on without signal (idle): 33 W

• INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is recommended to consider the minimum sizing values for any type of configuration.
  **INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of the limiter). We recommend sizing according to these values in case of professional installations and tours.

EMI CLASSIFICATION
According to the standards EN 55103, this equipment is designed and suitable to operate in E3 (or lower E2, E1) Electromagnetic environments.
FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.
For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions.
Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Features, specifications,s, and appearance of products are subject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
Features, specifications,s, and appearance of products are subject to change without notice.dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
420120357Q REV. 1.0
S115

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>