Bissell 2007 Series Revolution Pet Deluxe Quick Start/ User Guide

Built for Pet Owners

by Pet Owners

Quick Start Guide

Assembly

WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
» Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.
» Do not leave the appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy. Close attention is necessary when used by or near children.
» Do not use for any purpose other than described in this User’s Guide. Use only the manufacturer’s recommended attachments.
» Do not use with damaged cord or plug. If the appliance is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
» Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
» Do not run appliance over cord. Keep the cord away from heated surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or appliance with wet hands.
» Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce airflow.
» Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
» Turn off all controls before plugging or unplugging the appliance.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
» Do not use the appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
» Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
» Use only BISSELL cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this guide.
» Do not immerse. Use only on surfaces moistened by the cleaning process.
» Keep appliance on a level surface.
» Do not carry the appliance while in use.
» Always install float before any wet pick-up operation.
» Unplug before connecting TurboBrush® Tool.

SAVE THESE INSTRUCTIONS  FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt  circuit and has a grounding attachment plug that looks like the plugin illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

|

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

---|---

Thanks for buying a BISSELL carpet cleaner!

We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your carpet cleaner works as well as it does today for years to come, so this guide has tips on using (pages 10-13), maintaining (pages 16-19), and if there’s a problem, troubleshooting (page 20).
In just a few simple assembly steps, you’ll be ready to deep clean. Flip to the front and let’s get started!

Package Contents

1. Upper Handle
2. 1 Screw attached to Upper Handle
3.  Base with Dirty Water Tank
4. Clean Water Tank
5. Carry Handle
6. BISSELL Professional Pet Urine Eliminator + Oxy
7. BISSELL Pet Stain & Odor + Antibacterial Formula
8. Accessory bag & hose
9. Tough Stain Tool
10. Nozzle Clean Out Tool

NOTE : Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Getting to Know Your Deep Cleaner

Cleaning Formulas

WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
Keep plenty of genuine BISSELL formula on hand so you can clean and protect whenever it fits your schedule.
Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and may void the warranty.

BOOST
CARPET CLEANING FORMULA ENHANCER

| | |
Oxy Boost| Renew Boost| Prevent Boost| Pet Oxy Boost
Removes old, set-in stains permanently| Revives carpets to look their best| Repels stains from soaking into carpet fibers| Removes pet  stains and odors permanently

PRETREAT
PRE TREAT SPOTS AND STAINS TO IMPROVE
CARPET CLEANING PERFORMANCE

| |
Oxy Stain Destroyer| Pet Stain PreTreat| Pet PreTreat + Sanitize
Permanent Stain Removal in 30 seconds| Pretreat to help remove  tough pet stains and odors| Penetrates to sanitize  and loosen tough stains
easy fill

Pet Stain & Odor + Antibacterial
Cleans and Controls odor-causing bacteria.

PROFESSIONAL FORMULAS

|
ProfessionalDeep Cleaning| Professional Pet Urine Eliminator+Oxy
Out cleans all other formulas Includes Scotchgard™ Protector| Our best formula for pet urine stains & odors Includes Scotchgard™ Protector

*2X CLEANING FORMULA**

| | |
Pet Stain &Odor| DeepClean & Protect| DeepClean + Refresh| Deep Clean + Oxy
Removes tough  pet stains Includes Scotchgard™ Protector| Deep cleans carpets and protects from future stains with Scotchgard™ Protector| Powerful cleaning with a refreshing scent| Removes deep-down dirt, pet stains, & pet odor

BARE FLOOR FORMULAS

Hard Floor Solutions
Safe use for linoleum, vinyl, and ceramic tile; removes tough dirt and  grime

ONLY BISSELL Protects from future stains with Scotchgard™ Protector.
Scotchgard™ is a trademark of 3M®.
*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.

Tips Before Carpet Cleaning ONLY BISSELL Protects from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.

• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Pre-treat stains with BISSELL PreTreat to improve performance on coffee stains and ground-in dirt.

Customize Your Clean & Maximize Your Results

Our best formula for pet urine, stains, and odors. Permanently remove all three from your carpet!
For Pet Stains & Odors:
Erase pesky stains & remove odors!

Pretreat pesky pet stains with BISSELL Pretreat spray before using your deep cleaner. Choose a BISSELL pet formula for your deep cleaner and clean as directed.
To Clean Dark Stains :
Remove stains permanently!

Use BISSELL Deep Clean + Oxy formula or add BOOST OXY to any of your favorite BISSELL formulas to maximize the stain removal power.

To Remove Ground-In Dirt :
Renew your carpet!

Pretreat ground-in dirt with a BISSELL Pretreat Spray. Choose BISSELL Professional Deep Cleaning formula and pair with a BISSELL Boost to enhance your cleaning.

Pretreat ground-in dirt with a BISSELLPretreat Spray. Choose BISSELL Professional Deep Cleaning formula and pair with a BISSELL Boost to enhance your
cleaning.
To Refresh Your Home:
Choose your favorite scent!

Pair your carpet cleaner with BISSELL Febreze™ formulas to give your home a clean and refreshing scent.
For Antibacterial Clean:
Use BISSELL Pet Stain & Odor +Antibacterial formula

Use BISSELL Pet Stain & Odor + Antibacterial with the Deep Clean Mode of your machine to achieve antibacterial results.

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and may void the warranty.

Filling Your Clean Water Tank:

Antibacterial Formula

A few notes about filling the clean water tank:

• Fill with hot (140°F/60°C MAX) tap water and add the appropriate  BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE.
• When using BISSELL Antibacterial formula: Only fill your clean water tank with the recommended amount of water and formula to achieve antibacterial benefits.

NOTICE : Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.
NOTICE : BISSELL Antibacterial formula is only for BISSELL machines with EasyFill System™.

Filling Your Clean Water Tank:

2X Concentrated Formula

FORMULA FILLING  INSTRUCTIONS

|

DEEP CLEAN MODE

|

EXPRESS CLEAN MODE

---|---|---

BISSELL 2X  Concentrated Formulas

|

Fill water to the Water Fill Line that is next to DEEP CLEAN MODE on the Clean Tank. Add 2.5 oz of formula.

|

Fill water to the Water Fill Line that is  ext to EXPRESS CLEAN MODE on the Clean Tank. Add 1.25 oz of formula.

NOTE : Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER.  DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute the BISSELL 2X Formula cleaning solution with other household cleaning products.

Pour in more power with BISSELL Boosts
• Fill the tank with water and 2X formula (Step 3 above).
• Add 2 ounces of any BISSELL Boost per 1 gallon of water.
• The ProHeat 2X Revolution has a 1-gallon clean water tank.

Cleaning Your Carpet

Plug into a properly grounded outlet.

Select cleaning mode:
Deep Clean – Delivers a deep clean to your carpet.
Express Clean – Provides a
lighter clean with about 1 hour of dry time.

Press the power button to turn the machine on.

To recline your machine for use, press the recline pedal with your foot.

NOTICE : To prevent damage to Berber carpets, avoid repeated strokes in the same area.
Deep Clean Mode:
1. Press the spray trigger to apply the solution while making 2 slow wet passes -1 forward and 1 back.
2. Release the trigger.
3. Make 2 slow dry passes – 1 forward and 1 back, to suck up the dirty solution.
(Do not hold down the trigger for this step.)
NOTE : For best cleaning performance, clean with your machine in Deep Clean Mode.
Deep Clean Mode:
When using BISSELL Deep Clean + Antibacterial Formula
1. Press the spray trigger to apply the solution while making 3 slow wet passes – 1 forward, 1 back, and 1 forward again.
2. Release the trigger.
3. Make 1 slow dry pass back, to suck up the dirty solution. (Do not hold down the trigger for this step.)
Express Clean Mode :
1. Press the spray trigger to apply the solution while making 2 wet passes – 1 forward and 1 back.
2. Release the trigger.
3. Make 2 dry passes -1 forward, 1 back to sucking up the dirty solution. (Do not hold down the trigger for this step.)
NOTE : In Express Clean Mode, the dirty tank will not get as full as when cleaning with Deep Clean Mode.

Bare Floor Cleaning*

*Bare Floor Tool not included with the machine.
WARNING : To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool must be used and is only to be used with the BISSELL Hard Floor Solutions formula intended for use with this appliance.
NOTE : The bare floor tool that is compatible with the ProHeat 2X Revolution is not included. It is available for purchase by contacting our team by phone or visiting us online at BISSELL.com.

With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down until it clicks into place. Follow filling instructions on page 10 or 11 and switch cleaning mode to Express Clean.

Plug into a properly grounded outlet and press the power button.
Clean by pressing the trigger for 1 wet pass forward, 1 wet pass back, and then release the trigger and make 1 dry pass forward, 1 dry pass back.

When finished, unplug the machine and remove the bare floor tool by rotating the tool up to unhook from the nozzle.
Rinse and let dry before storing. Refer to page 16 for emptying the dirty water tank. Refer to page 17 for cleaning your machine before storing.

Area Rug Cleaning
Important! Please check the manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique, or area rugs without a manufacturer’s tag.
Regularly clean your high-traffic area rugs in Express Clean Mode:
• Check the manufacturer’s tag.
• Select Express Clean Mode.
• When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in an inconspicuous area. Your cleaner should not be used on unsealed surfaces.
• Important : Keep the foot of the deep cleaner perpendicular to the rug’s edge with each cleaning pass to prevent damage.

Cleaning with Hose & Tool

— Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Brushroll continues to rotate when in the upright position.
— Brushroll continues to turn while the product is turned on and the handle is in an upright position. To avoid damage to carpet, rugs, furniture, and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.
— The brush roll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one location for an extended period of time, as damage to the floor can result.

Press the spray trigger button to spray the soiled area, then slowly move the tool back and forth over the area.
Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.
When finished cleaning, turn the machine on to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing.
NOTE : If using the Deep Reach Tool or Pet Stain Tool be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers.

Cleaning with CleanShot®

Press the CleanShot® button with your foot. The window of the button will be green and show an “I” symbol when it is on.

The spray will continue until you turn it off. To turn CleanShot® off, press the button with your foot. The window of the button will be red and show an “O”  symbol when it is off.
Completely cover the stain with CleanShot® spray. Allow the stain to soak. To extract, maneuver the foot of the machine over the stain to brush and remove.

Empty Dirty Water Tank

WARNING To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from the electrical outlet before performing maintenance or troubleshooting.

Cleaning Machine After Use

WARNING To reduce the risk of electric shock, turn the power switch off and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting checks.

First, fill the clean water tank with warm tap water and then empty it all to rinse. Then fill again with warm tap water and return the tank to the machine. Twist cap back on tightly.

To flush and rinse the machine: Turn the machine on and press the trigger for 15 seconds while making back and forth passes on a section of carpet. Finally, release the trigger and extract the water.

Brush Roll & Nozzle Care

NOTE: Be sure to clean the brush rolls and nozzle before storing your machine. Follow these steps if your nozzle becomes clogged with hair or debris.

NOTICE : To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.

Replacing Belts & Brush Rolls

What you will need: 1 Phillips screwdriver & 1 flathead screwdriver

There are washers at the ends of the brush rolls, be careful that these do not fall off or get lost.
NOTE : To replace brush rolls, remove them from the metal posts and replace them. Make sure the metal post goes completely through the end of the brush roll. The brush roll bristles should be aligned in a ‘V’ pattern as pictured.

Align brush rolls with a belt at another end. To ensure alignment, hold the end of one brush roll and twist. The other brush roll rotates with it. Check that washer are in place. Reassemble the belt and end cap, securing with screws you removed.

If the flat belt is broken, gently remove the belt. If it needs replacing for any reason, the gear belt should already be removed before removing the flat belt. Rotate  the machine back to its side. Feed the new flat belt through the opening so that it wraps around the red pulley.

Keep it wrapped on the red pulley and adjust the machine so it is laying on its back again. Use your thumb to stretch the flat belt back to wrap around the metal axle.

Resecure the Wheel and Belt Access Door: Slide the wheel up back into the slot and secure with the screw that was removed.

Snap the Belt Access Door back down into place.
NOTE : See Step 6 on page 18 for how to put the brush roll cover and nozzle back in place.

Troubleshooting

WARNING To reduce the risk of electric shock, turn the power switch off and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting checks.

Problem

|

Possible causes

|

Remedies

Reduced or No Spray Through Foot of Machine

|

Clean water tank may be empty

|

Refill tank

Clean water tank may not be  seated completely

|

Turn power OFF; remove and reseat tank

No spray through hose & tool

|

The hose to your machine is not primed or may have lost prime

|

1. With the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose
2. Hold end of hose below water level in tank to prime
3. With the clean tank full of water, the machine OFF and

RECLINED, press the CleanShot® button ON and wait for the CleanShot® to drain for a few seconds; This will re-prime the machine

Clean Water tank may be empty

|

Refill the Clean Water Tank

Clean Tank may not be seated properly

|

Turn power OFF; Remove and reseat the clean water tank

No Spray

Through

CleanShot®

|

Clean Water tank may be empty

|

Refill the Clean Water Tank

Clean Tank may not be seated properly

|

Turn power OFF; Remove and reseat the clean water tank

The machine is not reclined

|

Press the Recline pedal and bring the handle down to recline the machine

Pump may have lost prime

|

With the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw; When water bubbles up, remove the pen; Reassemble the nozzle before cleaning again

CleanShot®

Continues Spray When Machine

is Off

|

CleanShot® button is not in the “OFF” position

|

Press the CleanShot® button to turn it off. The button window will show the color red and a “O” symbol when it is in the off position

Loss of  suction  power

|

Dirty tank may not be seated properly

|

Pick up the dirty tank and reseat so it fits in the unit

The dirty tank has picked up the maximum amount of dirty water and has reached the full line

|

Empty dirty tank

Rubber tab on dirty water tank is not sealed tight

|

Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly (see step 4 on page 16 for detail)

Accessory hose door may not be closed tightly in place

|

Check the accessory hose door and make sure it is closed tightly – it should be locked into place

Nozzle may be clogged from pet hair or debris

|

Use the nozzle clean-out tool and follow steps on page 17 for “Cleaning Nozzle”

Brush roll cover not fully snapped into place

|

Remove the nozzle and brush roll cover; Follow step 6 from page 18 and make sure you hear both buttons click into place

No power

|

Cleaning mode switch mistaken for power button

|

Press the red power button on the left side of the machine to turn the machine on

Outlet may not be active

|

Try plugging in a different device that uses a grounded outlet to test for power from the outlet

Leaking tank

|

Tank may have been over-filled

|

1. Make sure your tank has the water and formula in it that you’ve prepared
2. With the cap twisted ON tightly, hold your tank at an angle, over a sink or drain, so any extra water can pour out of the space 3. Wipe the tank dry with a cloth

Water may be caught in space between the tank and the tank’s handle

Warranty

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail  as described below.

Limited Five-Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for five years any  defective or malfunctioning part.

See information below on “If your BISSELL product should require service”.

This warranty applies to products used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.

BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS  PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF  ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW,  INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE  FIVE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you.

NOTE : Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.

Service

If your BISSELL product should require service:

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Website:

www.BISSELL.com/service-centers

E-mail:

www.BISSELL.com/email-us

|

|

Call:

BISSELL Consumer Care

1-800-237-7691

Monday – Friday 8am – 10pm ET

Saturday 9am – 8pm ET

Sunday 10am – 7pm ET

---|---|---

Please do not return this product to the store.

Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
Register your product today!
Registering is quick, easy, and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips, and more!
Visit www.BISSELL.com/registration!
Visit us online at BISSELL.com
When contacting BISSELL, have the model number of cleaner available.
Please record your
Model Number:
Please record your
Purchase Date:
NOTE : Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 21 for details.
Parts & Supplies
For Parts and Supplies, go to BISSELL.com and enter your model number in the search field.
We can’t wait to hear from you!
We really do read your comments, tweets, and posts.
Rate this product on BISSELL.com
or any of our retailer sites and let us (and millions of your closest friends) know what you think!

For cleaning tips and more visit www.BISSELL.com or find us at:

BISSELL  BISSELLClean  BISSELLClean  BISSELL  BISSELL

©2017 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 161-1942 02/17
Visit our website at www.BISSELL.com
Scotchgard is a trademark of 3M

Bissell 2007 Series Revolution Pet Deluxe Quick Start/ User Guide – Download [optimized]
Bissell 2007 Series Revolution Pet Deluxe Quick Start/ User Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>