EX3 Quick Start Guide

June 8, 2024
Drown Camera

EX3 Quick Start Guide

diagram, engineering drawing

EX3 Quick Start Guide

diagram, engineering drawing

  1. Brushless motor

  2. Undercarriage

  3. Propeller

  4. Camera

  5. Ultrasonic sensor

  6. Lights

  7. Vision positioning lens

  8. Battery

  9. Front light

  10. Rear light
    diagram, engineering drawing

  11. Power switch

*Please turn to User Manual for detailed information of flight environment requirements

Remote Controller

diagram, engineering drawing

  1. Power switch

  2. One-key RTH

  3. Left stick

  4. Right stick

  5. Photo/Video

  6. One-key unlock

  7. Mobile phone holder

  8. Antenna

  9. Hand stick

  10. LCD display

  11. One-key takeoff/One-key landing
    a drawing of a person

  12. High/Low speed switch
    (short-press); Light switch (long-press)

  13. Gimbal trimmer

  14. Gesture/GPS mode switch

Photo/Video

Short-press to take photos; Long-press to take videos.

One-key takeoff/One-key landing

Short-press to switch one-key takeoff or one-key landing.

EX3 Quick Start Guide

Short-press to enter into RTH procedure; Press again to exit RTH.

One-key unlock

Short-press to unlock; Long-press to lock.

High/Low speed switch (short-press); Light switch (long-press)

Short-press to switch High/Low speed; Long-press to turn on/off the LED lights.

Gesture/GPS mode switch

OFF – Gesture Mode; ON – GPS Mode.

Gimbal trimmer

diagram

LCD screen display

diagram

Return to Home (RTH) Icon

The icon is on during the RTH procedure and will be off once RTH procedure canceled.

Aircraft battery level

It indicates current aircraft battery level.

Distance against Home Point

It indicates current aircraft flying distance against recorded Home Point.

Satellite amount

Once the GPS signal amount is over 7, Home Point will be recorded at the location where the aircraft takes off.

High/Low speed mode

LOW – Low Speed; HIGH – High Speed.

Signal strength

It indicates the signal strength that the remote controller receives from the aircraft.

Photo/Video

Flashing once to take photos; Keep flashing to take videos.

Remote controller battery level

It indicates remote controller current battery level.

Altitude against Home Point

It indicates aircraft current altitude against Home Point.

Remote controller throttle mode

It indicates current throttle mode. Throttle mode is set at Mode 2 by default.

GPS mode

ON – GPS Mode; OFF – Gesture Mode.

Download the software “X-DRONE” APP

  • For Apple IOS system, please turn to Apple store, search “X-DRONE” or scan the QR code to download the software.
  • For Android system, please scan the “Google play” QR code or search “X-DRONE” in “Google play” to download the software.

graphical user interface

Prepare your EX3

Flight Preparation

diagram

Install 2*AA batteries into the Install the aircraft battery
remote controller.

Signal connection

text

Keep pressing the unlock button and turn Power on the aircraft by pressing the
on the remote controller. switch on the aircraft for 3 seconds

Compass calibration

diagram, engineering drawing

Step 1. Rotate the EX3 360 degrees for 3 circles horizontally.

Step 2. Rotate the EX3 360 degrees for 3 circles vertically.

Connect your mobile device with EX3

diagram

Unlock the aircraft

Short-press the unlock button.

Change the throttle mode

text

Keep pressing the unlock button and turn on the remote controller.
Keep pressing the RTH button for 3 seconds to change the throttle mode.

Control the aircraft

Throttle mode is set at Mode 2 by default. Left stick determines the aircraft’s altitude and orientation; Right stick control the function of each stick movement.

EX3 Quick Start Guide

Mode 1 is opposite to Mode 2. That’s to say, in Mode 1, right stick determines the aircraft’s altitude and orientation, left stick control the function of each stick movement.

EX3 Quick Start Guide
Turn off the remote controller and aircraft

Long-press the unlock button and turn off                Power off your aircraft by pressing
the remote controller.                                                   the switch for 3 seconds.

Charge the Aircraft Battery

  • The aircraft needs to be full charged before every flight;
  • Please use Eachine charging device for this aircraft;
  • Full Charging time takes about 270 minutes.

diagram

qr code

Read More About This Manual & Download PDF:

EX3 Quick Start Guide – Download [optimized]
EX3 Quick Start Guide – Download

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals