Digital Anemometer Instruction Manual WT9028
- June 8, 2024
- Anemometer
Table of Contents
Instruction Manual
Digital Anemometer WT9028
A. Function
- Measurement of wind speed and temperature
- Wind cold indicator
- Switch wind speed units
- Real-time measurement of wind speed and average wind speed
- Measurement of maximum wind speed and minimum wind speed
- Switch between Fahrenheit and Celsius unit
- Timed automatic shutdown (automatic shutdown after 10mins of no button operation)
- LED lighting
- Measurement of air volume
B. Instruction of parts and LCD display
Instruction of parts (as shown in picture)
- Fan blades
- LCD display
- Up/Maximum/Minimum mode
- Power/backlight
- Average wind speed measurement
- Switch of wind speed units/ Down
- LED lighting
- Data holding/Setting
- Battery door
- LED lighting
Instruction of LCD display (as shown in picture)
- Beaufort wind scale
- Low battery indicator
- Timing automatic shutdown indicator
- Wind speed unit:m/s, km/h, ft/min, knots, mph
- Air volume unit: CMM,CFM
- Wind cold indicator
- Wind speed icon
- Data holding
- Temperature unit & area unit
- Temperature display area
- Area value
- Two-thirds of maximum wind speed/maximum/minimum/average wind speed
- X10 times, X100 times (X10 appears when the value exceeds 99.99, X100 appears when the value exceeds 999.99)
- Air volume icon
- Wind speed / air volume display area
C. Operation instruction
D. Technical Parameters
Specific Declarations:
Our company shall hold no any responisibility resulting from using output from this product as an direct or indirect evidence. We reserves the right to modify product design and specification without notice.
Read More About This Manual & Download PDF:
Digital Anemometer Instruction Manual WT9028 – Download
[optimized]
Digital Anemometer Instruction Manual WT9028 – Download
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>