4G Smart Security Camera User Manual JH021
- June 8, 2024
- Security Camera
Table of Contents
4G Smart Security Camera User Manual
(Version: V1.0)
Welcome home
This guide will assist you to get a
quick start and to learn the operation
of the device effectively.
Your Device
Box contents
LED indicator status
Installation
(1) Iron wall
Put the magnet on the wall and then put the base on the magnet. Adjust the device position according to your needs.
(2) General wall
-
Get power supply with 2 ways.
a. Plug the device into a power outlet, then the device boots up.
b. Press the on/off button for 3 seconds, then the device boots up.
Note:
External power use is preferred.
If 4G SIM card is inserted and detected, network connection will start and yellow LED flashes slowly.
If 4G SIM card is not inserted or not detected, yellow LED instant ON. -
Install APP
Search “Tycam” from APP store or Google Play and install it in your iOS or Android device.Then open the APP
-
Create account
- Register by a valid email and set a proper password.
- An validation email will be sent to this email address. Go to your mailbox and validate.
- After validation, please return to the sign in page of APP and log in.
-
Add device
-
Select setup mode
-
Mode 1: Heard the voice prompt
Mode 2: Didn’t hear the Voice Prompt
Specifications
4G Smart Security Camera User Manual JH021 – Download
[optimized]
4G Smart Security Camera User Manual JH021 – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>