Razer Wildcat Xbox One Manual and FAQ

: June 7, 2024
: Razer

Table of Contents

Razer Wildcat for Xbox One Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Razer Wildcat for Xbox One Support

Can the wire be detached so I can use my Razer Wildcat as a wireless

controller?

While the wire can be detached for portability, the Razer Wildcat cannot be used as a wireless controller as it is designed specifically for eSports and requires minimal latency for competitive gaming?

Will the Palm Grips for the Razer Wildcat be sold separately in different

colors?

There are currently no plans for the grips to be sold separately and in different colors.

How do I clean my Razer Wildcat controller including the optional rubber

palm grips and residue after removing the optional rubber palm grips?

We recommend cleaning the Razer product with commonly available non-alcoholic wet wipes or moist towelettes. To clean your Razer controller, gently rub the non-alcoholic wet wipe on the area of the controller you wish to clean. Do not use harsh cleaning agents or scrub your Razer controller.

How can I get my Razer Wildcat controllers to work on Windows 8.1/7?

Connecting an Xbox Wireless Controller to a Windows 8.1 or Windows 7 PC with a micro-USB cable, the system will download and install drivers for the controller. If Windows did not automatically download the device software, you can check for updates in the Device Manager.

Note : If you’re using an Xbox Series X|S, Xbox Elite Wireless Controller Series 2, or Xbox Adaptive Controller, you should use a USB-C cable to connect your controller.

Here are the steps in checking for updates manually in the Device Manager:

Open the search field by clicking the search icon on the lower left corner of the screen.
Enter Device Manager in the search box, and then select Device Manager.

Note : Windows will possibly ask you for an administrator password or to confirm your selection.

Look for “Microsoft Xbox One Controller” and expand.
Right-click on “Microsoft Xbox One Controller” and select “Update Driver Software”.
Select “Search Automatically for Updated Software”.

You can connect up to 4 Xbox Wireless Controllers at the same time using Xbox Wireless or USB connections. You will no longer need to connect a headset since you will not get the audio through the controller.

Note : If the controller doesn’t respond, try connecting a different micro-USB or USB-C cable. For more information, please visit the Xbox support page.

Why aren’t the audio and audio controls for the Razer Wildcat for Xbox One

working on Windows?

Support for audio and audio controls via the Quick Control Panel on Windows will be coming soon.

Can I use Razer Wildcat on the MAC and on the Razer Forge TV?

No, the Razer Wildcat is designed and licensed specifically for Xbox One and Windows.

Can I use my Razer Wildcat on the PC?

Absolutely! Your Razer Wildcat is fully PC compatible, just plug the USB connector of your Razer Wildcat into the USB port of your PC and wait until the Xbox One Controller drivers are automatically installed on Windows 10.

How can I fix my Razer Wildcat that sometimes freezes up? Is unplugging

and replugging it into my Xbox One the only way to get it working again?

If you are experiencing this issue with your Razer Wildcat, please contact our Online Chat Support to get assistance to update your controller’s Firmware.

Are the ABXY action buttons for the Razer Wildcat Xbox One backlit?

No, the ABXY action buttons are not backlit.

After activating the trigger stops on my Razer Wildcat, in certain games,

the actuation triggers are no longer working.

“While the trigger stops are the hardware solution designed to allow gamers to actuate the left and right triggers rapidly by shortening their travel distance, these aren’t supported by some games natively as such we added a secondary feature called Hair Trigger Mode which allows gamers to actuate faster by reducing the activation response and time needed for the game to recognize the trigger pull.

To activate this mode, please refer to the Important Product Information Guide or follow instructions below:

Press and hold the Remap button until the active Profile Indicator blinks.
Press and hold the Trigger (Left or Right) you wish to configure.
Press the “A” button to activate the Hair Trigger Mode.
Release your fingers once you feel the controller vibrate.

To deactivate this mode:

Press and hold the Remap button until the active Profile indicator blinks.
Press and hold the Trigger (Left or Right) you wish to configure.
Press the “B” button to deactivate the Hair Trigger Mode.
Release your fingers once you feel the controller vibrate.

Can I record macros on the Razer Wildcat?

While you can remap any of the buttons on the controller to the 4 Multi- Function Button via 1-to1- duplication of the selected button, the Razer Wildcat cannot record macros as it is designed specifically for tournament use and complies with all tournament rules and regulations.

How do I attach the palm grips to the Razer Wildcat?

Click here and follow the detailed instructions on how to attach the palm grips to the Razer Wildcat

How do I clear a remapped button on the Razer Wildcat?

To clear a remapped Multi-Function Trigger(MFT) or Multi-Function Bumper(MFB), follow the steps below:

Press and hold the Remap button until the active Profile Indicator blinks.
Press and hold the MFB and MFT you wish to clear.
Press and hold the Xbox button
Release your fingers once you feel the controller vibrate.
Your MFB or MFT is now cleared.

How do I remap the buttons in the default profile in my Razer Wildcat?

You are only able to remap buttons in profile 1 and 2 and not within the default profile. Please press the profile toggle button on the Quick Control Panel to select either profile 1 or 2 before you remap buttons.