FELLOW Meet ODE Brew Grinder User Guide
- June 3, 2024
- Fellow
Table of Contents
Meet ODE Brew Grinder
User Guide
Meet ODE Brew Grinder
Hey there,
They say good things happen to those who grind.
But good things also happen to those who kick back, relax, and let me take
care of their morning cup. Prismo plunges, precise pour-overs,or French
pressing with finesse, name your brewing method—I can handle it.
Clean and quiet, my friends call me stealthy.
But don’t you dare stow me away. Cafe featuresrun through my veins but the
countertop is my stage. Pass me the mic… or your favorite bag of beans.
Rise and grind, baby! Love, Ode
QUICK START GUIDE
Please read the safety manual fully before turning on and using your grinder.
-
Select grind size by twisting the grind dial to the left or right (1=fine, 11=coarse).
-
Remove lid from the single dose load bin by lifting it off.
-
Pour the desired quantity of roasted whole coffee beans into the load bin.
-
Ensure the magnetically aligned catch is fully beneath the chute.
-
Press power button. The grinder will start grinding and stop automatically a few seconds after your beans are done grinding.
-
Before retrieving the catch, eject excess coffee grinds from insidethe chute by flicking the metal grinds knocker.
-
Remove the catch from beneath the grinder and take off lid.
-
Transfer grinds into your desired coffee maker using the easy pour fins inside the catch.
For more instructions, see the Safety and Maintenance guide.
GRIND SETTINGS
Dialing in your grind settings
Slowly rotate the grind dial left or right to align with the desired number
setting on the coarseness scale. Turning the dial to the right (clockwise)
produces a coarser particle size and left (counterclockwise) produces a finer
particle size. The settings shown in the table below can be used as a general
guideline.
Note: Partially ground coffee beans may remain between the burrs after
the grinder is turned off. Before making grind adjustments, please run the
grinder to clear any leftover coffee beans. 
1–3 Prismo AeroPress® Attachment | 3–6 AeroPress®
4–8 Pour-Over | 6–7 Cupping | 7–9 Electric Coffee Maker
8–10 French Press | 9–11 Cold Brew
COFFEE TIPS
Fresh is best!
We recommend grinding whole bean coffee right before brewing. While some
coffee will age faster or slower based on roast level, we generally recommend
enjoying beans under four weeks old.
If you don’t use your grinder often (every day to every other day), we advise clearing old grinds that may remain in the chute before use. If any old coffee residue is sitting inside the grinder, it might affect the taste of your next brew. To clear the chute out, pre-grind a small amount first (7 g / 0.25 oz) and discard.
When making a pour-over, if your brew is clogging before it is finished, try
again using a coarser grind.
Find more information at:
Fellowproducts.com/odemanual
www.fellowproducts.com | @fellowproducts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>