CAROLINA CHAIR TABLE COMPANY Counter OR Bar Tool Instruction Manual
- June 7, 2024
- CAROLINA CHAIR TABLE COMPANY
Table of Contents
- CAROLINA CHAIR TABLE COMPANY Counter OR Bar Tool Instruction Manual
- CAROLINA CHAIR & TABLE COMPANY
- ASSEMBLY INSTRUCTION COUNTER/BAR TOOL HM230-24/30
- PART CHECK LIST
- FITTINGS CHECK LIST
- **PHILIPS HEAD SCRE\ MlRJVER TOOL NEEDED (NOT INCLUDED)
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CAROLINA CHAIR TABLE COMPANY Counter OR Bar Tool Instruction Manual
CAROLINA CHAIR & TABLE COMPANY
Thank you for purchasing a Caroline Chair & Table Company product This product has been designed to’ easy assembly and is constructed for durability. Please take the tone to toad and follow the assembly instruct= carefully If a part or hardware is missing or you have arty difficulty in assembling this product, please contact us Toll-Free at 1-800-228-3876
ASSEMBLY INSTRUCTION COUNTER/BAR TOOL HM230-24/30
PART CHECK LIST
Code
1
2
3
4
5
|
COMPONENTS
SEAT FRAME
RIGHT LEG
LEFT LEG
LONG STRETCHER
SHORT STRETCHER
|
Qty
xP1
x02
x02
x02
x02
FITTINGS CHECK LIST
COOE
|
COMPONENT
|
QTY
---|---|---
A |
JCBC M6 x 50mm
|
x08
B |
SPRING WASHER 0114″
|
X 08
C |
FLATWASHER01/4•x19mm
|
x08
D |
PH SCREW M4 x 38mm x 08
|
x 08
F |
L-KEYM4x65mm
|
x01
**PHILIPS HEAD SCRE\ MlRJVER TOOL NEEDED (NOT INCLUDED)
**
-
Attach stretchers (4) to left legs (3) to right
legs (2). Use screw (0) to tighten the stretchers
(4) to the left leg (3) and the right leg (2) with Philips head screwdriver.
-
Place seal frame (1) upside down on a nonabrasive surface. Insert one leg assembly to
seal frame (1). Use bolls (A), spring washer (BJ , flat washer (C) to tighten on each side with
Allen key (E). Do not tighten bolls (A) all the way
-
Attach stretchers (5) to both legs. Use screw (0) to tighten stretchers to both legs with Philips head screwdriver.
-
Insert second leg assembly to seat frame (1), stretchers (5) as shown. Use bolts (A), spring washer (13), and flat washer (C) to tighten leg assembly to seal frame (1) with Allen key (E). Do no tighten bolts (A) all the way.
-
Use screw (DJ to tighten the stretchers (5) to the leg assembly with Philips head screwdriver.
At this stage tighten al[ screws and bolts all the way 100%
~