ITC 69641 Vertical Nav Light Instruction Manual
- June 3, 2024
- ITC
Table of Contents
ITC 69641 Vertical Nav Light
PARTS / TOOLS NEEDED
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
- Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
- All electrical connections should be made inside a watertight junction box
DIMENSION
- Remove bezel if not already disassembled.
- Determine the installation location for your light. Once determined drill a 0.5” hole.
- Connect wires to power source.
- Feed wires back through the hole and screw the light in place using the screws provided.
- Reattach bezel.
3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
Rev A • 11/02/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>