Dreamland Luxury Velvet Heated Over Blanket Instruction Manual
- June 7, 2024
- Dreamland
Table of Contents
Dreamland Luxury Velvet Heated Over Blanket
ILLUSTRATIVE GUIDE
DESCRIPTION OF THE APPLIANCE
- Overblanket connector
- Control unit connector
- Mains socket
- Rating label
- Overblanket
- Timer selector
- ON/OFF button
- Temperature selector
- Stand-by LED
- Auto shut off timer LED
- Temperature LED
TECHNICAL DATA
TYPE R7502
220-240 V 50/60 Hz 150 W
Dear Customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and EN manufactured with customer satisfaction in mind. These instructions for use are compliant with the European Standard EN 82079.
SYMBOLS
IMPORTANT INSTRUCTIONS.
RETAIN FOR FUTURE USE.
WARNING! Instructions and warnings for safe use.
Before using this appliance, carefully read the instructions for use and in
particular the safety notes and warnings, which must be complied with. Keep
this manual together with its illustrative guide for future consultation.
Should you transfer the appliance to another user, make sure you hand over
this documentation as well.
NOTE: Should any part of this manual be difficult to understand or any doubt
arise, contact the company at the address indicated on the last page before
using the appliance.
NOTE: Persons with impaired vision may consult these instructions for use in
digital format at the website www.dreamlanduk.co.uk
-
After unpacking, make sure the appliance is intact, complete with all its parts as shown in the illustrative guide and with no sign of damage. If in any doubt, do not use the appliance and contact an authorised service centre.
WARNING! Risk of suffocation. Children shall not play with the packaging. Keep the plastic bag out of the reach of children. -
This appliance must be used only for the purpose for which it was designed, namely as an over blanket for home use. Any other use is considered not compliant with the intended use and therefore dangerous.
-
Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply. The rating is on the appliance or on the power supply unit if any (see illustrative guide).
-
This appliance can work automatically at a frequency of 50 Hz or 60 Hz.
-
This appliance is only to be used with the types of detachable control
the unit that is marked on the appliance.
Children under the age of three are not to use this appliance due to their inability to react to overheating.
- This appliance can be used by children older than 3 years and younger than 8 years under supervision and with the control always set to minimum temperature (heat setting 1).
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
- This appliance must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating.
- The cable and control unit of the appliance can give rise to risks of entanglement, strangulation, tripping or treading if not correctly arranged. The user shall make sure that electric cords shall be arranged in a safe way.
- Always disconnect the appliance from the mains supply before cleaning or performing maintenance and when the appliance is not in use.
- Examine the appliance frequently for signs of wear or damage. If the appliance has been misused or does not work, contact an authorised technical service centre before switching it on again.
- If the supply cord is damaged, take the whole appliance to an authorised technical service centre for the replacement of the control unit, so as to prevent all risks.
- If the appliance is used on an adjustable bed, check that the blanket and cord do not become trapped or rucked, for example in hinges.
- This appliance is not intended for medical use in hospitals.
- DO NOT use if wet.
DO NOT INSERT PINS OR NEEDLES.
- When storing the appliance, allow it to cool down before folding.
WARNING! DO NOT crease the appliance by placing items on top of it during
storage.
WARNING! For use, cleaning, maintenance and storage of the appliance, please
follow the instructions specified in the corresponding chapters.
-
DO NOT use the appliance with wet hands or damp feet.
-
DO NOT pull the power cable or the appliance itself to remove the plug
from the socket. -
DO NOT pull or lift the appliance by the supply cord.
-
DO NOT expose the appliance to humidity, to the effects of weather (rain, sun, etc.) or to extreme temperatures.
-
If the appliance is faulty or malfunctions, switch it off and do not tamper
with it. Contact an authorised technical service centre for any repairs. -
DO NOT use this appliance to warm animals.
-
DO NOT tuck in. · See the external packaging for the characteristics of the appliance.
USE
-
Make up the bed as normal using a top and bottom sheet.
-
Spread the over blanket over the top sheet with the blanket connector (1) facing downwards at the foot of the bed [A].
-
Ensure that the overblanket is lying flat.
-
Do not fold.
-
Additional bed covers can be placed on top of the overblanket.
-
You can also place the overblanket inside the duvet cover, then place the duvet on top to keep the heat in. Ensure that the connector is at the bottom end of the duvet cover.
-
If using the overblanket on a chair or sofa, place it over you to keep you warm and cosy [D].
-
You may wish to wrap the blanket around you, but do not wrap tightly or sit on the overblanket as this may cause the overheat protection system to activate.
-
The connector must be at foot of the overblanket.
CONNECTING THE CONTROL UNIT -
Insert the control unit connector (2) in the overblanket connector (1) to connect the control unit to the overblanket.
-
Run the control unit cable along the floor next to the bed. Do not squash the control unit cable between the mattress and the bed frame.
-
Insert the plug of the control unit cable in the mains socket (3). Every time the plug is inserted, the control unit automatically performs a self-diagnosis, lighting up all LEDs (10, 11) in a clockwise sequence for around two seconds.
SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE
The control unit can be set to the following temperature levels:
6: Fast pre-heat temperature
5-4: Medium pre-heat temperature
3-1: Continuous or all-night use
- To switch the overblanket on press the ON/OFF button (7). Every time the appliance is turned on, the Auto Safety Function automatically runs a full check of your blanket, lighting up all the LEDs (10, 11) in a clockwise sequence. Following this check, the control unit automatically sets to temperature 6 and the auto shut off timer to 1 hour.
- For fast pre-heat, use maximum temperature 6. If you like a medium pre-heat temperature then you can select 4-5 by pressing the temperature selector button (8) until the LED for the required temperature lights up (11). The higher the number selected, the higher the temperature.
IMPORTANT: The temperature of the overblanket must be evaluated by lying in the bed rather than just feeling it by hand.
CONTINUOUS OR ALL NIGHT USE
For continuous or all night use of the appliance set the control unit to temperature settings from 1 to 3 only.
To set the control unit to the continuous use temperature, press the temperature selector button (8) until LEDs 1, 2 or 3 light up (11).
DO NOT get into bed with the control unit set to a higher temperature than recommended for continuous use. If the appliance is slept on with the controls set to a higher temperature the user may suffer skin burns or heat stroke.
WARNING! DO NOT place the control unit under the pillow or under the sheets when in use.
AUTO SHUT OFF TIMER EN
The overblanket has an automatic shut off timer of 1, 3 or 9 hours.
When switched on, the control unit automatically sets itself to 1 hour on the
auto shut off timer and the LED 1h lights up green (10). To set a different
auto shut off timer, press the timer selector button (6) and select the
desired timer. Each time the auto shut off timer is reset, the timer starts
from zero. When the time has elapsed, the overblanket switches off and the
standby LED (9) lights up blue.
NOTE: Should the power supply accidentally be interrupted during use, when the
control unit is switched back on, it will maintain the temperature and timer
settings in use previously and the timer counter will start from zero.
NOTE: So that the display light does not bother users during the night, the
light intensity reduces around 15 seconds after any button is last pressed.
Similarly, the standby LED becomes less bright 15 seconds after it is
activated.
SWITCHING OFF
Switch the overblanket off by pressing the ON/OFF button (7) and remove the
plug from the socket (3).
CLEANING AND MAINTENANCE
The overblanket is washable. Check the washing symbols on the label to ensure it is washed correctly.
WARNING! Always disconnect the appliance from the mains and disconnect the control connector from the overblanket before cleaning or performing maintenance.
BEFORE WASHING
- Take the plug of the control unit cable out of the mains socket (3).
- Press the grip levers at the sides of the control unit connector (2) to remove the control unit connector from the overblanket connector (1).
MACHINE WASHING
- The overblanket can be cleaned in the washing machine at 30°C, on a delicate cycle.
- Pre-treat any stains by spot cleaning before placing them in the washing machine.
- Use only the delicate cycle for spinning. DO NOT make an additional spinning cycle.
DRYING IN THE TUMBLE DRYER
- The overblanket can be dried in a tumble dryer on a delicate cycle, but at the end of the drying cycle, it must be air-dried to allow it to dry completely.
- Remove the overblanket from the tumble dryer at the end of the drying cycle and reshape it to its original size.
- Allow the overblanket to fully air-dry before using it again.
DRYING IN THE OPEN AIR
- When the overblanket is spread out to dry on a clothes airer, it must be stretched so the original size is more or less maintained. This is best done while the blanket is still damp, working alternately on the opposite corners and pulling one side at a time. You might have to repeat this procedure several times until the blanket is completely dry.
WARNING! Dry the appliance flat without using pegs to avoid damaging it. Leave it to dry, laid out flat on a clothes airer, not in direct sunlight.
- Only use the overblanket when it’s thoroughly dry.
- Do not iron the overblanket.
WARNING! Examine the appliance against the light to make sure the cables are not bent or twisted.
WARNING! If the appliance does not resume its original size or if problems arise with the internal cables contact an authorised service centre for a safety check.
STORING THE OVERBLANKET
When not in use, store as follows:
- If the overblanket has been washed, wait until it’s completely dry;
- Fold it like a normal blanket;
- You are advised to store the cover blanket in the original packaging it was supplied in;
- When storing the appliance, allow it to cool down before folding;
- Put the overblanket away in a dry place
The fabric may turn yellow over time. This does not have any effect at all on
the safety and/or effectiveness of the product itself.
Examine the appliance and its supply cord frequently for signs of wear or
damage. if there are such signs or in the case of malfunction, contact an
authorised technical service centre.
TROUBLESHOOTING
This chapter describes the most common problems that can arise using the appliance. If the problems cannot be solved with the information below, please contact the Authorised Service Centre.
DISPOSAL
The packaging of the appliance is made of recyclable materials. Dispose of the
packaging in accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the crossed bin symbol on the appliance or its packaging indicates that the appliance must be EN disposed of separately from other waste at the end of its useful life. The user must therefore take the appliance to an appropriate recycling centre for electrical and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic products measuring less than 25 cm to retailers of electronic products having a sales area of at least 400 m2 free of charge and with no obligation to buy. Proper waste sorting prior to sending the equipment no longer used for recycling, processing and disposal in a manner that respects the environment contributes towards avoiding negative impacts on the environment and on health and promotes the reuse and/or recycling of the equipment’s material.
GUARANTEE
This product is guaranteed for a period of 2 years from the date of purchase
against material, mechanical and electrical defects. The guarantee is binding
if it is accompanied by a valid receipt of payment. This guarantee is only
valid if the appliance is used solely for domestic purposes in accordance with
the instructions provided that is not connected to an unsuitable electricity
supply, dismantled, interfered with in any way damaged, through misuse, fair
wear and tear. Under this guarantee we undertake to repair or replace free of
charge any parts found to be defective.
PLEASE NOTE, THE COST OF A SAFETY INSPECTION IS NOT COVERED BY THIS GUARANTEE.
A CHARGE WILL BE MADE IN RESPECT OF ANY PRODUCT RETURNED UNDER THIS GUARANTEE,
WHERE NO FAULT IS FOUND.
This guarantee is offered as an extra benefit and does not affect your
statutory rights as a consumer. This guarantee does not confer any rights
other than those expressly set out above and in particular we shall not be
liable for any indirect or consequential loss or damage. Nothing in this
guarantee or the instructions relating to the product excludes, restricts or
otherwise affects your statutory rights. In line with our policy of continuous
development, we reserve the right to change this product, packaging and
documentation without notice. If a defect appears and after checking that the
blanket is being used properly in accordance with the instructions, return it
with a valid proof of purchase, as soon as possible to the manufacturer’s
Service Centre. This guarantee is valid in the UK only.
SERVICE CENTRE
PO Box 166 Middlewich Cheshire CW10 0ZU – Tel: 0333 0050305
E-mail: customerservice@imetec.co.uk
www.dreamlanduk.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>