frescologic USb VGA Adapter Series User Manual

frescologic USb VGA Adapter Series User Manual

Setup the Adapter for Windows

NOTE: Before you can begin connecting an additional display, you must install a driver for the adapter cable. Please follow these instructions

Install Driver

1. Download the driver from the link http://bit.ly/elecable select the correct driver for your operating system.
2. Double click on the driver file to start the installation process.
3. Follow the steps to complete the installation.
4. Once the installation is complete, please reboot your computer

NOTE:

1. If you are working on a company computer, contact your IT specialist to log in as an Administrator having the rights to install the driver.
2. If the driver was not successfully installed, please temporarily turn off real-time antivirus protection, then reinstall it.
3. Uninstall other USB graphics drivers (such as SMSC, Display Link), they cannot be used on your PC simultaneously.

2. Connect the Adapter

1. Connect the VGA end to your display’s VGA port, then turn on your monitor.
2. Connect the USB end to your computer’s USB3.0 port. Waiting a few seconds, your PC will automatically detect the second monitor and display your PC’s desktop screen.

NOTE:

1. Avoid video adapter chains or USB Hub. Chaining two video adapters together or use USB Hub can actually cause issues, If possible, remove other adapters or Hub.
2. Some laptops don’t have enough juice to push the extra pixels of an external display, connect the power adapter to give it additional power

3. Configure the Display

By default, computer should automatically detect external displays, and will automatic adjust the screen resolution. Sometimes, things don’t go
smoothly, you may still need to select the appropriate mode and adjust your resolution manually.

Extend or duplicate the desktop with a second monitor. Press the Windows logo key + P on your keyboard. Select a display option according to your needs:
Duplicate (Mirror) — Show the entire desktop on both displays. The second monitors mirror the primary monitor. The maximum resolution is limited to the lowest resolution monitor attached to the system. Extend — Both monitors combine to offer an extended desktop. The desktop screen of your PC is extended across all the detected monitors
and allows you to have a desktop screen that spans across all monitors. The mouse can move between monitors.

Windows 10                                         Windows 8.1/8

Adjust the Screen Resolution

If you experience problems, such as having one of the displays function at the wrong resolution. Right click an empty area on the desktop, and then click Display settings (Windows 10) or Screen Resolution (Windows 8/7). From there, you can adjust the screen resolution and orientation, as necessary.

In Windows 10

In the Resolution drop-down menu, select a screen resolution (ex: 1920 x 1080) that you want for the selected monitor. Choose between landscape or portrait to change the selected display orientation. The Multiple displays option allows you to switch display modes (as described in the section above). If the selected screen resolution mode is optimal, click Keep Changes.

In Windows 8.1/8

Point to Resolution Select your desired resolution, if the selected screen resolution or display mode suits your requirement, click Keep Changes.
Click OK in the Screen Resolution Window to close it.

In Windows 7

Click the Resolution drop down menu, and select a screen resolution by moving the slider arrow right or left; then click OK. If the new settings are compatible, your computer screen will reappear with the new settings in place Click Yes if you want to keep the new settings. Restart your computer to ensure that the changes are saved.

Setup the Adapter for Mac OS

1. Download the driver from the link http://bit.ly/elecable select the correct driver for your operating system.
2. Double click on the driver file to start the installation process.
3. Follow the steps to complete the installation.
4. Once the installation is complete, please reboot your computer.

2. Connect the Adapter

1. Connect the VGA end to your display’s VGA port, then turn on your monitor.
2. Connect the USB end to your computer’s USB3.0 port. Waiting a few seconds, your PC will automatically detect the second monitor and display your PC’s desktop screen.

NOTE:

1. Avoid video adapter chains or USB Hub. Chaining two video adapters together or use USB Hub can actually cause issues, If possible, remove other adapters or Hub.
2. Some laptops don’t have enough juice to push the extra pixels of an external display, connect the power adapter to give it additional power.

3. Configure the Display

(You can also visit website https://support.apple.com/en-sg/HT202351) Use extended desktop mode

Maximize your workspace with extended desktop mode, which lets you enjoy full- screen apps and windows on each monitor. Then, use Mission Control to organize apps and windows across your displays. If your Dock is on the bottom of your screen, it appears on any of your displays when you move your pointer to the bottom edge of your display

Turn on extended desktop mode

Make sure that your external display is powered on and connected to
your Mac.
Choose Apple ( ) menu > System Preferences, then click Displays. Select the Arrangement tab. Make sure that the Mirror Displays checkbox isn’t selected.

Arrange your displays or change your primary display

So that you can move apps and windows across your displays in one continuous motion, arrange your displays to match the setup on your desk. You can also change your primary display, which is where your desktop icons and app windows first appear. Here’s how:

1. Choose Apple ( ) menu > System Preferences, then click Displays.
2. Select the Arrangement tab.
3. Arrange your displays or change the primary display:
   .To arrange your displays, drag one of the displays where you want it. A red border appears around your display as you arrange it.
   .To change your primary display, drag the white bar to another display.
   The Arrangement tab of Displays in System Preferences
   

Use video mirroring

With video mirroring, all of your displays show the same apps and windows.

Turn on video mirroring

1. Make sure that your external display is powered on and connected to your Mac.
2. Choose Apple ( ) menu > System Preferences, click Displays, then select the Arrangement tab.
3. Make sure that the Mirror Displays checkbox is selected.
   

Frequently Asked Questions

Why is the screen resolution only 800×600?

1. When it connected to the PC’s USB 2.0 port, the video resolution will only operate at 800×600. Please try a different port an ensure it’s connected at USB 3.0
2. Out-of-date drivers may cause the USB 3.0 operate at USB 2.0 speed and cause compatibility issues, please upgrade your PC’s USB Controller drivers to latest version.

*Why the second monitor’s resolution less than 19201080?**

The resolution you can use depends on the native resolutions your monitor supports. If your second monitor with native resolution lower than 19201080, your display screen can only run at the native resolution or lower- assuming you have a monitor with a native resolution 1440900, when you connect to your computer, then the
maximum resolution is 1440*900.

Why does the screen display abnormally or even blank screen?
Please check the following to see if something caused this issue:

1. Check if your system display adapter driver is installed properly.
2. If you have DisplayLink devices installed in your system, please remove the driver from Control Panel\ Programs and Features\ since these kind of devices may influence the performance.
3. If you have the USB to VGA adapter connected to a USB 3.0 Hub or docking station, connect it directly to a USB 3.0 port on your computer instead.
4. Out of date USB3.0 xHCI hosts may have some compatibility issues due to the specification. It could cause either blank/blinking screen, or only low resolutions supported. Please connect the device to the latest USB 3.0 xHCI hosts.

The second monitor not being detected in Windows 10

Usually it’s a driver problem. If your video driver is out of date, incorrect or faulty, Windows 10 won’t be able to extend or mirror your desktop to
your second display. It’s also possible that your monitor driver is causing the problem.

External display issues? Try these steps

1. Avoid video adapter chains or Hub Chaining two video adapters together or use USB Hub can actually cause issues, If possible, remove other adapters or Hub.

2. Change screen resolution manually
   – In you system’s settings, play around with the resolution settings until something looks comfortable for your eyes.
   – Choose the default resolution. If you’re using a scaled resolution already, try setting your display to use the default resolution for the display.

3. The screen resolution only 800×600. Please try a different port an ensure it’s connected at USB 3.0 speed.

4. Attach your laptop’s power adapter. Some laptops don’t have enough juice to push the extra pixels of an external display, connect the power adapter to give it additional power.

5. Re-set your video connections, make sure the cable is firmly connected.

6.  Use Auto-Adjustment of monitor.

7. Check is your computer’s brightness turned all the way down.

8. Reinstall or update graphics driver.

9. Check for software updates for your software.

Read More About This Manual & Download PDF:

References

• Drivers & Downloads – ELECABLE
• Connect a display to your Mac - Apple Support (SG)
• support.frescologic.com/portal/kb

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>