LG ST-43HF Floor Stand Instruction Manual

June 12, 2024
LG

LG ST-43HF Floor Stand

Product Information

The Floor Stand is a compatible accessory for the ST-43HF model. It is designed to securely hold and display the TV set. The dimensions of the Floor Stand are 662mm (width) x 610mm (depth) x 1129mm (height), and it weighs 16.6kg. It is compatible with TV
models released in 2021 with a screen size of 43 inches and belongs to the HT3WJ series.

Product Usage Instructions

Precautions before Installation

  1. Read the manual carefully before operating the set.
  2. Retain the manual for future reference.

How to Prevent TV from Falling

  1. Secure the brackets on the back of the product and the wall, as shown in the figure.
  2. Ensure that the product brackets and wall brackets are firmly fastened.
  3. Verify that the product brackets and wall brackets are secured at the same height.

Adjusting the Floor Stand Screen Orientation

If necessary, adjust the screen orientation of the TV set on the floor stand as per your preference.

Adjusting the Floor Stand Height

You can adjust the height of the floor stand according to your needs.

Please read this manual carefully before operating your set and retain it for future reference.

ST-43HF

Product Specifications

Model Name ST-43HF
Width x Depth x Height (mm) (Max.) 662 x 610 x 1129
Weight (kg) 16.6
Model Name ST-43HF
--- ---
Width x Depth x Height (inches) (Max.) 26.0 x 24.0 x 44.4
Weight (lbs) 36.5

CAUTION

  • This stand (model name: ST-43HF) is designed exclusively for monitors manufactured by LG Electronics Inc. For compatible monitors series, please refer to the below table.
  • Using it with other equipment may render it unstable and cause injury.

Precautions before Installation

  • The floor stand does not include a multi-socket adaptor. Purchase and use a multi-socket adaptor of an appropriate length to supply power to the monitor and connect devices to the floor stand.
    (The length of the power cord exposed to the outside of the floor stand is approximately 1.0 m (3.2 feets).)

  • The maximum weight that can be placed on the rear bracket of the floor stand is 15 kg (33.0 lbs).

  • If the wireless router is placed on the rear bracket of the floor stand, the remote control may not work properly due to frequency interference caused by the wireless antenna inside the monitor and the wireless router being located close to each other.

  • If the set-top box is placed on the rear bracket of the floor stand, the remote control receiver on the set-top box may be blocked, making it difficult to receive the remote control signal.

Models Compatible with the Floor Stand
Compatible Model Released in 2021

Inches Series
43 HT3WJ

How to Prevent TV from Falling

  1. If necessary, secure the brackets on the back of the product and the wall, as shown in the figure. Secure the product brackets and wall brackets at the same height.
  2. Verify that the product brackets and wall brackets are firmly fastened.
  3. Using a strong cord, tie and connect the product brackets to the wall brackets. When moving a product installed in this way, please untie the cord first.
    • Make sure to level the monitor when installing it.
    • It is safe to install the product according to the installation method to prevent the damage to the product or personal injury even if the product is pulled forward.
    • Install the monitor close to the wall so that it does not fall backwards, even when pushed.
    • The brackets, screws, and cords must be purchased separately as they are not provided with the product.

Adjusting the Floor Stand Height

The height of the monitor can be adjusted, as shown in the figure.

Adjusting the Floor Stand Screen Orientation

The screen orientation can be adjusted, as shown in the figure.

www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved. Printed in Korea

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals