arc sound Haze Portable Speaker User Manual

June 3, 2024
arc sound

arc sound Haze Portable Speaker

THANK YOU!
Thank you for purchasing this Arcsound product. Please read through this product manual carefully before using the product. Heed all warnings and follow the instructions. Keep the product manual safe and accessible as you might need it later on for future usage.

INCLUDED ACCESSORIES

The HAZE portable speaker comes included with several accessories:

  •  Wireless microphone
  •  AA batteries (mic)
  •  Remote control
  •  AAA batteries (rem)
  •  Power charger
  •  User manual

SAFETY INFORMATION

Do not use this product near water or in a moist environment. Do not block any openings or ventilations on the product. Only clean the product using a dry cloth. Do not insert any plugs in the product if the plugs or cords are wet or moist. Do not place the product near any heat sources like radiators, stoves or other appliances that produce heat. Do not expose the product to direct sunlight for extended periods of time, operating temperature 5-40 degrees celsius. Unplug the product during lightning/thunderstorms. Around products are all designed and manufactured to meet great quality standards. Refer all potential servicing of the product to qualified service personnel only. The product requires service if it has been damaged in any way, if it has been exposed to moisture, does not operate normally or has been dropped. No user- serviceable parts are included in this product. Product design and specifications are subject to change without notice.

PRODUCT INFORMATION

HAZE portable speaker is equipped with a 12V/7A battery to give you the freedom to play music wherever you are. Before using the speaker for the first time, the battery needs to be charged for 8 hours. Please make sure that the speaker is turned off when you charge it. When the speaker is fully charged, unplug the power cord from the speaker and the power socket. Depending on how much power is in the speaker, the battery charging time can vary between 3-10 hours after usage. To extend the battery lifetime, recharge the speaker to full power after every use.

WARNING!
The speaker should be kept at least 2 meters away from CRT displays and televisions because of the speaker’s strong magnetic field. Magnetic interference can cause display magnetization or discoloration phenomenon.

BLUETOOTH FUNCTION
First-time connection with smartphone/device

  1. Turn the power on the speaker, press the ”MODE” button or ”INPUT” button on the panel or remote control, and switch the speaker to the Bluetooth channel. Make sure that your smartphone’s Bluetooth function is on.
  2. Search the Bluetooth device list and select the Bluetooth device named ”HAZE”. The speaker will play a notification tone when the connection’s successful.
  3. Open your smartphone’s music player and play a song. The music is transferred via Bluetooth and sound comes out through the HAZE speaker.

Previously connected smartphone/device

When the smartphone’s Bluetooth function is turned on, press the ”MODE” button and select Bluetooth mode. The speaker will automatically connect to the smartphone/device which was connected last time to the speaker. You can also search the Bluetooth device list on your smartphone, select ”HAZE” and connect your smartphone to the speaker.

WIRELESS MICROPHONE
Included with the HAZE portable speaker is a wireless microphone with a built- in battery. With the microphone, you can use the HAZE portable speaker for outdoor concerts, advertising, entertainment, events and other activities. Make sure that the HAZE speaker and its microphone has fully charged batteries before using it outdoors to make sure it lasts through the whole event.
Hold the ”MODE” button on the HAZE speaker down for more than two seconds to prioritize the wireless Microphone. Test the microphone out before using it, adjust its volume by turning the volume knob on the HAZE speaker. Please turn off the microphone when it is not used.

To ensure good sound quality the wireless microphone should be used within 10 meters from the HAZE speaker’s location. If the microphone has a low battery or the environment contains other Bluetooth devices that might cause interference, the 10-meter usage distance will be reduced. Make sure that the microphone’s frequency is unique and does not get interrupted by other freq- agencies or wireless microphones. For optimal performance when using the wireless microphone, keep a distance of 5-15cm between your mouth and the microphone and hold the microphone in a 45-degree angle. If you own several speakers with wireless microphones that you want to use at the same time, please make sure that they use different standard frequencies to avoid interferences and other technological issues. Do not put the HAZE portable speaker too close to any VCD/CD/DVD while using it, since these types of devices are equipped with strong frequencies that might cause interference.

TRUE WIRELESS CONNECTION

True wireless stereo (TWS) technology TWS technology enables you to make a wireless connection between two speakers of the same model. When you use TWS to connect two HAZE portable speakers, they will automatically be grouped as a stereo-speaker system and use outputs for the left and right channels.

First-time connection with TWS

  1. Turn the power on both of the speakers, press the ”MODE” button or ”INPUT” button on the panel or remote control, and switch the speakers to Bluetooth channel. Make sure the speakers are not connected to any smartphone unit yet.
  2. Press the ”PLAY/PAUSE” button on the control panel of one of the speakers for 5 seconds until you hear the first notification tone (beep). This speaker becomes the main speaker (left channel) and automatically searches for and connects with the other speaker (right channel). When the connection between the speakers is successful, you will hear the second notification tone (ding-dong).
  3. Connect your smartphone to the main speaker via Bluetooth. Search the Bluetooth device list and select the Bluetooth name ”HAZE”. The speaker will play a notification tone after a successful connection.
  4. Open your smartphone’s music player and play a song. The music is transferred via Bluetooth and sound comes out through both the HAZE speakers as a TWS stereo-speaker system.

NOTE!
When you have connected two HAZE speakers together via TWS mode, manipulations to the main speaker (left channel) will be simultaneously done to the other speaker (right channel). Examples of these actions are volume up/down, previous/next song selection, play/pause and power on/off.

TRUE WIRELESS CONNECTION

Previously connected with TWS
When the two HAZE portable speakers are turned on, press the ”MODE” button and select Bluetooth mode. The speakers will automatically reconnect with TWS as a stereo-speaker system. The speaker setup regarding the main speaker (left channel) and the second speaker (right channel) will remain the same.

Disconnect speakers from TWS
To disconnect the speakers from each other, turn the speakers on and hold the ”PLAY/PAUSE” button down for 5 seconds on the main speaker (left channel).

LED LIGHTS
The HAZE portable speaker has a built in LED display at the top, and decorative LED lights at the front behind the speaker grill. The LED display uses red color while the LED lights can shift between several colours. Press the ”LIGHT” button to switch between different decorative LED light modes. The LED lights will follow the music beat when the speaker is playing. To turn off the decorative LED lights, press the ”LIGHT” button down for 3 seconds.

CONTROL PANEL

  1. Mini SD port
  2. USB port
  3. LINE input
  4. Guitar input
  5. MIC1 input
  6. MIC 2 input
  7. Recharging indicator
  8. DC15V External Power Jack
  9. Power ON / OFF
  10. Guitar volume + / – control
  11. MIC volume control
  12. Echo + / – control
  13. Treble + / – control
  14. Music volume control
  15. BASS + / – control
  16. MODE selection
  17. Record
  18. Previous & FM channel –
  19. Play / Pause & FM scan
  20. Next & FM channel +
  21. Repeat
  22. LED display mode

REMOTE CONTROL

  1. Mute
  2. Previous folder
  3. EQ mode
  4. Previous & FM channel –
  5. Record
  6. Power ON / OFF
  7. Next folder
  8. Folder repeat
  9. Repeat
  10. Volume control +
  11. Play / Pause & FM scan
  12. Next & FM channel +
  13. Volume control –
  14. Tracks select
  15. MODE selection

SPECIFICATIONS

Around is a trademark by Winn Scandinavia AB
Winn Scandinavia AB reserves for possible typos, and factual or numeric errors that may have been printed on any products, package designs, user manuals, and/or other included accessories.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals