2350180-1 Vollrath Induction Template Installation Guide

Table of Contents

Specifications

Manufacturer: Vollrath
Product: Induction Template
Compatibility: Vollrath drop-in induction cookers and warmers
Material: High-quality surface
Clamps: Minimum of four clamps for two hob templates, minimum of eight clamps for four hob templates

Installation

Ensure installation is done by qualified service or installation personnel.
Measure the induction template, induction unit, and counter top before installation to verify fit.
Apply food-grade silicone between the template and countertop for stability.
Use a minimum of four clamps for two hob templates and evenly distribute eight clamps for four hob templates.
Maintain clearance and air circulation requirements for the induction unit(s).
Consider drawer, door, and other clearances before installation.

Maintenance

Regularly clean the surface of the induction template with a mild cleaner and soft cloth to maintain its beauty.

Q: Can the Vollrath induction template be used with other induction units?

A: No, the induction template is designed specifically for Vollrath drop- in induction cookers and warmers for optimal performance.

Q: What should I do if liquid enters the induction unit?

A: If liquid enters the induction unit, disconnect power immediately and consult a qualified service technician for assistance.

Vollrath Induction Template Instructions

The Vollrath induction templates are specially manufactured to the highest standards.
To maximize the life and beauty of these surfaces, read and follow all the instructions.
The Vollrath induction template must only be installed by qualified service or installation personnel.
These induction templates should only be used with Vollrath drop-in induction cookers and warmers.
The top of the induction unit must be in contact with the bottom of the induction template for proper operation.
Measure the induction template, induction unit, and countertop before installation to verify the template will fit.
Apply food-grade silicone between the induction template and the countertop around the entire edge. This will help the template stay in place and reduce liquid from entering the induction unit.
A minimum of four clamps must be used with two hob templates and a minimum of eight clamps evenly be used with four hob induction templates.
All clamps must be evenly spaced.
All clearance and air circulation requirements for the induction unit(s) must be maintained. See the unit’s operator’s manual specifications.
Drawer, door and other clearances need to be considered before installation of the Vollrath temple and the Vollrath induction unit.
Due to the variety of installation applications and installation methods, Vollrath is not responsible for damage to the induction template or induction unit during installation or subsequent use.

INSTALLATION OF VOLLRATH INDUCTION TEMPLATES

The strategy or method you choose may differ from the one listed below. Figure 1 shows the method currently used to install an induction template to a Vollrath Buffet Table.
Figure 2 shows another method which can be used.
Note: All clips, clamps and fastening hardware shown are customer-provided.
A) Vollrath induction template.
B) Countertop or tabletop.
C) Vollrath drop-in induction unit.
D) Clamp. Figure 1 shows a wood clamp. Figure 2 shows a metal clamp commonly used for mounting under cabinet sinks.
E) Fastener.
F) Nut.
G) Washer.