BRANDGUARD Galvanized Steel Fire Ember Instructions
- June 7, 2024
- BRANDGUARD
Table of Contents
KEY SPECIFICATION
3″ Fireplug Vent Model # FP2021
Eave Vents| Model| Size W x L| NFVA Provided| Flanges Available| Flange Definition|
Weight
---|---|---|---|---|---|---
| FP2021| 3” diameter| 2 sq in| Flange Front| Flange Front| 2lbs
Continuous Soffit and Custom sizes/materials AVAILABLE| | |
BENEFITS:
-
Safety vents that are used in areas prone to wildfires, wind-driven rain, or wind-driven snow.
-
Overlapping Baffle Protection (Patented)
o Air Flows through normally
o Resists the intrusion of Flames, Embers, Radiant Heat, Wind Driven Rain and Snow -
Approved for use throughout California and beyond
-
Anti -Clogging Overlapping Baffles plus 1/16″ mesh plate on back side of vent
-
Prevents Rodent Entry
-
20 Year Warranty
-
Easy to Install, Retrofit and Paint (comes with pre-drilled holes)
STANDARD MATERIALS
ASTM A653/A653M- G90 hot-dipped galvanized steel, 26GA
ASTM D9092- mill phosphatized coating for painting. IF BONDERIZED
ASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED
.025 x.025 hot dipped galvanized 23ga wire mesh
Installation:
See website: www.brandguardvents.com for installation instructions and video. Product is intended to be used only under a roof overhang inserted into 2x blocking/frieze block. It is not intended to be used on a sidewall without a protective roof overhang.
BRANDGUARD VENTS Inc.
6 Rancho Circle, Lake Forest, CA 92630
T: 949-481-5300
E: info@brandguardvents.com
www.BRANDGUARDVENTS.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>