MAD HEATERS Revolve Gen 2 Steam User Manual
- June 4, 2024
- MAD HEATERS
Table of Contents
MAD HEATERS Revolve Gen 2 Steam
Product Overview
- Sleeve
- Cooling Unit
- Mouthpiece
- DRC Airflow Tube
- Secondary Cooling Unit
- Cooling Fins
- Airport
- Reclaim Filter Screen
- Reclaim Filter Posts
- Cooling Helix
- Adjustable Airport
- DRC Aperture
- Adjustment Ring
- DRC Indicator
- DRC Internal Aperture
- O-ring Locking Groove
- O-ring Storage / SCU Lock
- Secondary DRC Indicator
TECHNICAL SPECIFICATIONS
- Length: 80mm / 109mm with Tip (XL Size)
- Width: 12mm (at widest point)
- Material: Grade 5 Titanium
- Weight: 18.5g / 0.65oz
- O-rings: Heat resistant, isopropyl alcohol safe
BEFORE FIRST USE
Please clean each part of your Stem thoroughly with isopropyl alcohol to
remove every trace of residue from the machining and coating process. You will
need to provide your own DYNAVAP Tip and Cap combination to complete the
Revolve Stem.
CLEANING AND CARE
Soak the Stem in isopropyl alcohol for at least 30 minutes using the
cleaning/storage tube or a zip-lock bag. Shake it periodically for a thorough
clean. If you are cleaning the Glass Sleeve, only shake it carefully to
protect the glass from accidental damage. Drain the solution, rinse the parts
with hot water and dry them completely before reassembling. You can soak the
DYNAVAP Tip alongside the Stem, but never submerge a DYNAVAP Cap in any
cleaning solution For a quick clean, dip the Cooling Unit in the cleaning
solution and use a paper towel to ‘twist off’ the spiral. Then use q-tips with
some cleaning solution to clean the rest of the parts. We recommend that you
only remove the Cooling Unit from the Sleeve when you intend to clean it. Do
not remove the o-rings when cleaning the Stem, they are isopropyl alcohol
safe. Do not soak Wood Sleeves in a cleaning solution, just clean the metal
liner with a q-tip or pipe cleaner. Regularly apply a small amount of wood wax
to the outside of the Wood Sleeve to avoid cracking.
WARNING
MAD Heaters products and accessories are only intended for individuals who are
18 years of age or older. If you experience any side effects or possible side
effects, stop using the product immediately and consult a physician. Please be
responsible and keep out of reach of children and pets.
USE OF THIRD-PARTY TERMS
DYNAVAP is a registered trademark of Dynavap LLC and is only used here in
accordance with fair use policies.
ADDITIONAL INFORMATION
- Please be aware that the Cooling Fins may get hot during use. This is intentional, they are designed to dissipate heat from your vapor.
- Before removing the Cooling Unit do a full turn on the Adjustment Ring to remove the excess reclaim from the side of the spirals. This will help with removing and re-inserting the Cooling Unit when it’s done without cleaning.
- If the Cooling Unit is difficult to turn or remove from the Sleeve then try warming it up with another session, heat can help loosen the build-up. Alternatively, soak in isopropyl alcohol.
- NEVER try to move the DYNAVAP Tip side-to-side when removing it from the Glass Sleeve, it might break it. Only pull and twist.
- If your DYNAVAP Tip is loose or does not have enough friction, switch the grey o-rings for the black o-rings for a slightly tighter fit.
- To remove the inner o-ring that is located behind the Adjustment Ring, please use a needle or sharp tweezers.
- The Mouthpiece is compatible with 10mm WP connections.
- The 12mm wide Glass Sleeve may be used with other vaporizers that have a 12mm WPA connection.
- If your Stem needs cleaning, you may try the other Airflow Tube for a clean vapor path.
DRC AIRFLOW OPTIONS
Align the line on the Adjustment Ring to the Airport to choose from the following options with the Draw Resistance Control (DRC) Airflow Tube:
Fresh air is drawn into the Airport and through the center of the Cooling Unit before mixing with the vapor and passing over the Helix.
The air intake at the Airport is directed straight to the Mouthpiece for a blast of cool air that bypasses the Helix.
The Airport is closed. Not adding any fresh air will produce denser clouds while still cooling the vapor. Perfect for mouth-to-lung use.
DIRECT AIRFLOW OPTIONS (OPTIONAL)
You can expand the capabilities of your Revolve Stem even further with the optional Direct Airflow Tube. It will remove the DRC options entirely to give you improved flavor and cooler Sleeve temperature, but with warmer vapor.
Air intake at the Airport is directed to the Mouthpiece for a blast of fresh air while the vapor heads through the center.
Fresh air is drawn around the Helix to cool the Sleeve and the Cooling Unit before mixing with the vapor which then travels through the center.
The Airport is closed for a hotter, more direct vapor experience.
ADJUSTABLE AIRPORT
When using the OPEN or BYPASS mode you can control the maximum air intake
at the Adjustment Ring with the help of our fully adjustable Airport.
LOCKABLE SPINNING MOUTHPIECE
The Revolve is a breeze to use with a lighter thanks to its built-in smooth-
spinning Mouthpiece. If you are using a heater or just want to fix the
Mouthpiece you can lock or unlock the mechanism with a quick adjustment.
LOCKED MODE
Pull out the Airflow Tube from the Mouthpiece and roll the o-ring from its
storage position into the locking groove as shown above. The o-ring will
create friction on the inner side of the Mouthpiece which will stop it from
spinning.
SPINNING MODE
Remove the o-ring completely from the Airflow Tube OR roll it down to the
storage position as shown above to store it for on the go. To remove the
o-ring from its locking position, pinch the o-ring to create a bulge and push
it off sideways with your fingernail until it begins to rise up out of the
groove.
DRAW RESISTANCE CONTROL
To adjust the DRC slowly start pulling out the Mouthpiece until it locks into
position as shown below. Locate the triangle on the Airflow Tube, then rotate
and adjust with your fingernail from the top grooves. Choose either mouth-to-
lung (MTL) for slower and tighter draws or direct-lung (DL) for a powerful and
long draws with increased airflow. The DL side has a single long deep line,
the MTL setting has 3 graduated lines (deeper equals more open). Try the MTL
side with the CLOSED option to further reduce the airflow. Drawing too hard
with MTL can cause excess condensation in the DRC tube.
SECONDARY COOLING UNIT (SCU)
The SCU will increase the cooling capabilities of your Revolve Stem even
further, and it is especially useful with the Direct Airflow Tube. To install,
first remove the o-ring from the Storage Position, push the SCU in place, then
replace the o-ring. If you would like to install the SCU and lock the spinning
Mouthpiece at the same time, use a second small o-ring (5x1mm) in the Locking
Groove. The SCU will provide the following modifiers to the guide values:
- With DRC Airflow Tube: + 0.5 Cooling, – 0.5 Flavor
- With Direct Airflow Tube: + 1 Cooling, – 0.5 Flavor
ALTERNATIVE SLEEVE OPTIONS
The Sleeves will affect the Cooling, Flavor, and Sleeve temperature as
follows:
GLASS SLEEVE
- With DRC Airflow Tube: + 0.5 Flavor, – 2 Sleeve temp.
- With Direct Airflow Tube: – 1 Sleeve temp.
WOOD SLEEVE
- With DRC Airflow Tube: – 0.5 Cooling, – 3 Sleeve temp.
- With Direct Airflow Tube: – 2 Sleeve temp.
RECLAIM FILTER SCREEN
The optional removable Screen acts as a particulate filter as well as a
collector for some of the reclaim before it has a chance to condense on the
Cooling Unit. This extends the number of sessions before deep cleaning is
required.
To insert the Screen, remove the Cooling Unit from the body and ‘snap’ the
Screen into position between the two posts at the end of the Cooling Unit.
Replace or clean regularly for the best experience.
Pro tip – When the Screen is full you can place the whole thing in your
next bowl for a cheeky reclaim bonus.