noctua Cooling Fan User Manual
- June 7, 2024
- Noctua
Table of Contents
USER MANUAL
www.noctua.at
sound-optimised premium components
Designed in Austria, Noctua’s premium cooling components are internationally renowned for their superb quietness, exceptional performance, and thoroughgoing quality. Having received more than 1000 awards and recommendations from leading hardware websites and magazines, Noctua’s fans and heatsinks are chosen by more than a hundred thousand satisfied customers around the globe. sales@noctua.at | www.noctua.at
Dear customer,
Congratulations on choosing the Noctua NF-A8. Our fans are renowned for their
impeccable quality and outstanding longevity and like all Noctua fans, the
NF-A8 features an MTBF rating of more than 150.000 hours that’s backed up with
our 6 years manufacturer’s warranty. Each Noctua fan is double checked for
flawless operation by our quality control team before it leaves the factory
and I’m confident that you will be able to sense some of the research,
attention and care we’ve put into making this product.
Enjoy your NF-A8!
Yours sincerely,
Roland Mossig, Noctua CEO
This document includes some instructions for installing, running, and cleaning
your NF-A8. Should you have any further questions, our support team
(support@noctua.at) will be glad to assist you at
any time.
Please also have a look at the regularly updated FAQs on our website:
http://www.noctua.at/faqs
This document is also available in other languages at the following URL:
http://www.noctua.at/manuals
http://mobile.noctua.at/manuals/fan/NF-A8_PWM/index.php
Scan this code to display multi-lingual manuals on your mobile phone:
NF-A8 PWM | User Manual
Installation
When installing the NF-A8 on a heatsink, radiator or other devices that use a
custom mechanism for fan installation (fan clips, proprietary screws, etc.)
please use this mechanism for installation.
When installing the NF-A8 as a case fan, you can either use proprietary clip
systems (if your case features a clip system for fan installation) or the
supplied mounting screws and silicone anti-vibration mounts. In order to
install the fan using the silicone mounts, please first pull the silicone
mounts through the mounting holes of the case. Then put the fan onto the
silicone mounts and pull them through the mounting holes of the fan:
If necessary, you
can easily remove the NF-A8’s integrated anti-vibration pads:
Connection
The NF-A8 comes with a 4-pin PWM fan connector for fully automatic speed control via your mainboard’s 4-pin PWM fan headers. Please note that the fan can also be connected to your mainboard’s 3-pin fan headers though. When connected to 3-pin fan headers, the NF-A8 will run at full speed (unless the mainboard supports voltage based speed control).
If you’re using multiple NF-A8 fans, you can use the supplied y-cable (NA-YC1) to connect several fans to one PWM fan header. This way, your mainboard will set all the connected fans to run at the same speed. The NF-A8 features a short 20cm primary cable in order to help you minimise cable clutter in typical applications. If you need a longer cable, please add the supplied 30cm extension (NA-EC1).
The NF-A8 comes with a Low-Noise Adaptor (NA-RC7) that allows you to reduce the fan speed from 2200 to 1750rpm. You can either use the adaptor to set the fan to a fixed speed of 1750rpm (if speed control is deactivated) or to cap the maximum speed to 1750rpm during PWM speed control.
Cleaning and Maintenance
Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.
In order to ensure flawless operation over many years of usage, the NF-A8’s premium grade SSO2 bearing is fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.
Warranty and Support
Even with high-grade products and strict quality control, the possibility of defects cannot be eliminated entirely. Therefore, we aim at providing the highest possible level of reliability and convenience by offering a warranty period of 6 years and direct, fast and straightforward RMA service.
Should you encounter any problems with your NF-A8, please don’t hesitate to contact our support team (support@noctua.at).
References
- Noctua.at - Premium cooling components designed in Austria
- Noctua.at - Premium cooling components designed in Austria
- Support : Noctua Knowledge Centre
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>