HUAWEI FreeBuds 3 User Manual
- June 7, 2024
- Huawei
Table of Contents
HUAWEI FreeBuds 3 User Manual
Introductions
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract
made between Huawei and the customer. All or part of the products, services
and features described in this document may not be within the purchase scope
or the usage scope. Unless otherwise specified in the contract, all
statements, information, and recommendations in this document are provided “AS
IS” without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Features
Power-on
Open the charging case and press and hold the Function button for 2 seconds to
power on the charging case.
Pairing
Preparations:
Ensure that the earphones are inside the charging case. Open the charging case
and place your phone within 50 cm of the earphones. Bluetooth pairing: Press
and hold the Function button for 2 seconds until the inner indicator light
flashes white.
-
Proximity pairing: When your phone screen is on, a pairing prompt will be automatically displayed when your phone is close to the earphones. Touch CONNECT to complete the one-step pairing
-
A prompt will be displayed if the pairing is successful.
NOTE : This feature is only supported on EMUI 10.0 or later.
Audio Control
- During music playback, double-tap the upper part of the right earbud handle to skip to the next song.
NOTE : You can set double-tap functions in the Huawei AI Life app. For details, see section 2.4 Setting Double tap Function.
Active Noise Cancellation
- Double-tap the upper part of the left earbud handle to enable or disable ANC mode
NOTE : Use the Huawei AI Life app to adjust the ANC level as needed. For details, see section 2.3 ANC Settings.
Charging the Earphones
To charge the earbuds, place them in the charging case to initiate automatic
charging.
Charging the Charging Case
To charge the charging case, use a Type-C charger or place it on a compatible wireless charger with the back side facing up.
Factory Settings Restoration
- If the earphones fail to connect, play no sound, or cannot be found when searching on your phone, restore the earphones to their factory settings for troubleshooting:
- Ensure that the earphones are inside the charging case, open the case, and press and hold the Function button for 7 seconds until the inner indicator light flashes red. When the indicator.
- light flashes white, the earphones have been restored to their factory settings, and they will then enter Pairing mode.
Indicator Lights
- Inner indicator light
State
|
Description
---|---
Turns green| The battery level of the earphones is higher than 60%.
Turns yellow| The battery level of the earphones is between 20% and 60%.
Turns red| The battery level of the earphones is lower than 20%.
Flashes white| The earphones have entered Pairing mode.
Flashes red| The earphones have been restored to their factory settings.
- Outer indicator light
State
| Description
---|---
The charging case is being charged| Turns green| The battery level is higher
than 90%.
Turns yellow| The battery level is less than 90%.
The charging case is not being charged| Turns green| The battery level is
higher than 60%.
Turns yellow| The battery level is between 20% and 60%.
Turns red| The battery level is lower than 20%.
More Functions
Installing the Huawei AI Life App
Use the browser on your phone to scan the QR code or use Huawei AppGallery to
download and install Huawei AI Life. Pair with FreeBuds 3 and add it to the
device list. You can then use the app to adjust the ANC level, set double-tap
functions, and perform firmware updates when a new version is available.
Adding FreeBuds 3 to the Device List
Preparations:
- Download and install the Huawei AI Life app. For details, see section 2.1 Installing the Huawei AI Life App.
- Pair the FreeBuds 3 with your phone, or ensure that your FreeBuds 3 are in Pairing mode (to do this, press and hold the Function button for 2 seconds).
- Your phone is already connected to a Wi-Fi network.
Step 1 : Open the Huawei AI Life app, touch the + icon in the upper right
corner, and touch Add device. The app will automatically scan all devices in
the Wi-Fi network.
Step 2 : In the list of scanned devices, find the earphones’ device name
and touch CONNECT on the right side to add this device.
- Go to the home screen of the AI Life app, touch Home to view the added devices, and use the app to adjust settings for the devices.
ANC Settings
Preparations:
- Download and install the Huawei AI Life app. For details, see section 2.1 Installing the Huawei AI Life App.
- Add FreeBuds 3 to the device list in AI Life. For details, see section 2.2Adding FreeBuds 3 to the Device List.
Step 1 : Open the Huawei AI Life app. Go to the home screen of the app
and touch Home to add FreeBuds 3 to the device list.
Step 2 : Touch Noise cancelling to see more details.
Step 3 : Then enable Noise cancelling.
Step 4 : Move the blue dot on the dial to adjust the ANC level to a
more comfortable level.
Note :
- The effectiveness varies by person. Adjust how active the noise cancelling is above.
- Noise cancelling may affect your ability to respond to your surroundings. For safety reasons, ifs recommended to disable it when working out, running, or in busy environments.
Setting Double-tap Functions
Preparations:
- Download and install the Huawei AI Life app. For details, see section 2.1 Installing the Huawei AI Life App.
- Add FreeBuds 3 to the device list in the AI Life app. For details, see section 2.2 Adding FreeBuds 3 to the Device List.
Step 1 : Open the Huawei AI Life app. Go to the home screen of the app
and touch Home to add FreeBuds 3 to the device list.
Step 2 : Touch Shortcuts.
Step 3 : Set the double-tap functions for the earbuds as needed.
Software Update
Preparations:
-
Add FreeBuds 3 to the device list in AI Life. For details, see section 2.2 Adding FreeBuds 3 to the Device List.
-
Pair the FreeBuds 3 with your phone, or ensure that your FreeBuds 3 are in Pairing mode (to do this, press and hold the Function button for 2 seconds).
-
Your phone is already connected to a Wi-Fi network.
Step 1 : Open the Huawei AI Life app. Touch Home, and select the device FreeBuds 3.
Step 2 : Touch Check for updates. -
The current version will be displayed if a new version is not available.
-
An update prompt will be displayed if a new version is available.
-
Touch UPDATE.
-
Touch OK when the update is complete and perform the operations as prompted.
Huawei Technologies Co., Ltd
Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129
People’s Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>