4G LTE LTE CPE Wireless WiFi Router User Manual
- June 7, 2024
- 4G LTE
Table of Contents
4G LTE CPE Wireless WiFi Router User Manual
**
**
4G LTE LTE CPE Wireless WiFi Router User Manual
Product Overview
- Get to know your LTE Indoor CPE
| 1 | Power indicator | On：CPE connected to power,indicator is on; |
|---|
Off:CPE not connected to power,indicator is off
2| WAN indicator| On:insert SIM card ,successfully registered to 4G/3G
network ,indicator turns green；
Off：CPE not connected to power,or no SIM card,or not registered to network.
3| WiFi indicator| On:when user connected to WIFI , indicator is on.
Off:CPE power off , indicator off.
4| LAN indicator| On：plug cable to LAN port,indicator is on;
Off：cable pulled out,indicator off
5| 3G/4G indicator| Insert SIM card,successfully registered to 4G/3G
network,indicator is on
4G/3G not registered,indicator off
6| Power port| CPE power input:12V 1A,please use standard power adapter
7| LAN port| To provide cable network to users.
The first RJ45 port near power port is WAN or LAN , the rest are LAN ports
8| SIM card slot| Insert SIM card to connect to 4G/3G network,support Micro
SIM card only
9| Reset button| Long press for 5 seconds,CPE will restore to factory
setting,device restart automatically.
Application
- base station
- power adaptor
- internet terminus
- computer
- tablet PC
- laptop
- smart phone
Access to internet by Ethernet
Notice: Place the device on a stable surface.
- Open the packing box, insert the power adapter into the power port of CPE.
- After power on, all indicators will on, then power indicator steady on, WiFi indicator steady on;
- Connect the WAN port to Ethernet port, WAN indicator will steady on, it will blinking once data is being transmitted.
- Connect the LAN port to the end device, LAN indicator will steady on, it will blinking once data is being transmitted.
Or connect the end device through WiFi, WiFi indicator will blinking once data is being transmitted.
- base station
- power adaptor
- internet terminus
- computer
- tablet PC
- laptop
- smart phone
Access to internet through 3G/4G network
Notice: Place the device on a stable surface.
- Insert the standard Micro SIM card as following picture:
- Open the packing box, insert the power adapter into the power port of CPE;
- After power on, all indicators will on, then power indicator steady on, WiFi indicator steady on;
- 4G CPE will automatically dial-up, 3G/4G indicator steady on, then blinking, it means the device already connect with Internet
- base station
- power adaptor
- internet terminus
- computer
- tablet PC
- laptop
- smart phone
Set up a WiFi connection
- Make sure CPE is turned on, and WiFi is on working;
- Power on the end device to enter the WiFi setting;
- Click the SSID of CPE, SSID and password are on the sticker of CPE, refer to the right picture;
- Enter WiFi password, click connect, WiFi connection is successful after WiFi indicator blinking.
(The WiFi setting interface is different for different end devices, refer to
the following device). 
CPE Lm321 SSID: 4G-CPE-
XXXXXX Login/password: admin Router IP: 192.168.100.1 WIFI KEY:
A1b2c3d4
- Iphone
- Android
Login WEB UI
- Make sure the 4G CPE is power on, and your com- puter and mobile phone connected with 4G CPE;
- Open the browser of com- puter or mobile phone;
- Enter the IP address into the address bar of browser, IP address is as right picture;
- Enter the user name and password into the prompt dialog box, user name and password are: admin;
- In the main menu of WEB UI, it including CPE status, router setting, WiFi setting,firewall, SMS setting, system management and etc;
- After finish the setting, click the apply, the device will restart autom- atically.
Main menu of WEB UI: 
Faulty checking and Notices
Faulty checking:
- Power indicator is off, please check if you plug the power adapter properly.
- 3G/4G indicator is off, please check if you insert SIM card properly.
- 3G/4G indicator doesn’t blinking:
- It is searching for the internet while it steady on within 3 minutes;
- It can’t connect to internet while it steady on more than 3 minutes, please change the CPE into another place.
Notices:
- Place the device on a stable surface.
- Ideal operating temperatures are -20℃ to 70℃, ideal storage temperatures are -20℃ to +70℃. Extreme heat or cold maydamage your device or accessories.
- Keep the device away from sources of fire, water to avoid da- mage your device or accessories.
- Do not use your device during thunderstorms to protect your device against any danger caused by lighting.
- Do not bend or press the external antenna, otherwise, comm-unication quality may be reduced.
FAQS
What is a 4G LTE router?
An LTE router, otherwise known as a 4G router or a MiFi router, is a device that uses a satellite connection to plug into the Internet, and not cable. These routers may lack the speed of a wired connection, more in line with a mobile hotspot, but speeds have been increasing since 5G has been gaining in popularity.
Can 4G LTE replace home internet?
Yes, a 4G hotspot can be used for home internet and can even replace other kinds of internet service. Mobile 4G LTE hotspots are generally more expensive than plans for fixed 4G LTE home internet and have lower data caps.
Is LTE and WiFi the same?
Since LTE is accessed through a mobile device, its range is virtually limitless. Whether you’re at home or in transit, you can surf the web at your convenience, as long as your provider covers the area you’re in. Meanwhile, WiFi only works within a fixed location, so its range is limited to the router’s capability.
Does LTE modem need a SIM card?
A 4G WiFi router, containing a built-in LTE broadband modem, uses a SIM card to share internet connections. You can use a 4G WiFi router for internet sharing anywhere, as long as it is within the network range of the network service provided by your mobile operator.
Is 4G LTE faster than Wi-Fi?
There are so many situations where WiFi speed is much worse than mobile data. And it pretty much has to do with stumbling upon a bad (slow, non functional) WiFi hotspot to which your smartphone sticks – a.k.a. sticky WiFi.
Is LTE good enough for home internet?
Cable. Verizon 4G LTE wireless broadband is 10 times faster than 3G — able to handle download speeds between 5 and 12 Mbps (Megabits per second) and upload speeds between 2 and 5 Mbps, with peak download speeds approaching 50 Mbps.
How much does 4G LTE cost?
Home 4G LTE internet plans usually cost $40.00 to $60.00 per month. Mobile 4G hotspot plans cost $100.00 to $150.00 per month and often have larger upfront costs for equipment.
Can I put a SIM card in a router?
With a 4G Wi-Fi router or Mobile Wi-Fi, you can insert a SIM card to enjoy fast, stable Wi-Fi. Find the SIM card slot on the back panel. Get a SIM card (Micro or Nano) that fits the slot.
Are 4G WIFI routers good?
With 4G, speeds have become comparable and, in some cases, faster than fixed-line broadband. According to OpenSignal data, the ‘Big Four’ (EE, O2, Three and Vodafone) were able to achieve an average speed of 21.33Mbps, which is faster than many ADSL broadband products.
Is there a router that takes a SIM card?
This wifi router can be another good option to pick for your home or office if you want to go for a device with a sim card slot. This is a single-band router that is suitable for 4G connections at home.
Which is better WiFi or LTE?
Speed: The standard data transfer speed for Wi-Fi is between 11Mbps to 1Gbps depending on its specifications. LTE, on the other hand, offers data transfer speeds between 100 Mbps and 1Gbps.
Is LTE good for streaming?
We found that using a dedicated 3G/4G LTE hotspot is a more reliable way to stream than phone tethering. The consistent cellular signal and Ethernet hardwiring played a big part in this. It’s nice to be able to monitor bandwidth and data usage in real time.
How much faster is LTE than 4G?
If we talk about the original LTE, 4G is significantly faster. 4G is significantly faster. LTE offers only 100 Mbps, while true 4G offers up to 1,000 Mbps. However, if we take a look at the LTE-A speeds, the difference disappears as it also offers 1,000 Mbps.