PATCHBOX SETUP.EXE User Manual
- June 7, 2024
- PATCHBOX
Table of Contents
PATCHBOX SETUP.EXE
Warning: Please clarify the load capacity of the server rack with the
manufacturer. Always check assembly aid for tightness before loading. Assembly
aid needs to be free from contamination, such as oil and lubricants. Make
sure all nuts are tight. Before loading, make sure that the locking pins are
fully inserted. If necessary, remove the extended locking bolts with one turn.
Loads must not be pushed over the joint of the assembly aid (risk of
overloading).
Loads must be protected from the risk of damage caused by falling down through appropriate additional measures. The mounting aid includes magnets. Keep away from data carriers, magnetic storage devices and sensitive electronic devices. Keep away from children, risk of swallowing small parts.
How to Assemble
All rights reserved. Specifications subject to change. PATCHBOX GmbH, Hernalser Gürtel 1/12, 1170 Vienna, Austria. +43 1 99 71 960, office@patchbox.com, patchbox.com. KD001Q120 © PATCHBOX 2020