netAlly LinkRunner G2 Smart Network Tester User Guide
- June 7, 2024
- netAlly
Table of Contents
netAlly LinkRunner G2 Smart Network Tester User Guide
LinkRunner™ G2 Smart Network Tester
The LinkRunner G2 is an Android-based network testing and troubleshooting
tool. It allows networking professionals to easily verify network connectivity
and PoE functionality and to
validate cabling. LinkRunner G2 can also act as a packet reflector for
performance tests run by other netAlly testers and includes a VLAN Monitor and
packet Capture tools.
- The LinkRunner G2 interface applies many of the operations typical of any Android device. Use swiping touchscreen motions to navigate through screens and to drag down the top notification panel.
- The LinkRunner G2 features a main AutoTest screen, a Switch Test screen, and a Cable Test screen. Swipe left and right to move through the three test screens.
- To run AutoTest, connect the RJ-45 port or the Fiber port on the top of the LinkRunner G2 to an active network switch. Touch the NetAlly logo icon at the bottom of the screen to open the LinkRunner G2 testing application.
- The Switch test tab displays the information from the nearest switch information from theinitial switch port advertisement (CDP, LLDP).
- The Cable test can help you determine cable length and status, wiremap patch and structured cabling, and locate cables.
View the complete User Guide on the Home Screen of your LinkRunner G2.
Link-Live Cloud Service is a free, online system for collecting, organizing, and reporting your connection test results, which are automatically uploaded once your LinkRunnerb G2 is claimed and configured. Customers with a support contract can also download major software updates from Link-Live, and minor updates are available to others.
-
Power Up and Connect a) To begin charging the internal battery, plug the included AC power supply into the charging port. The battery will fully charge via AC power in 4-6 hours.
b) Press the power button to start up the unit. The Power LED turns green when the LinkRunner G2 is powered on and red when the unit is charging.
c) Connect your LinkRunner G2 to an active Internet connection using the Ethernet port
Your LinkRunner G2 is now ready to perform tests on your network and display results on the LCD screen. On power up, the LinkRunner G2 testing application opens and begins testing your network. Once running, LinkRunner G2 will also charge via Power over Ethernet (PoE) if connected to a switch with PoE available. To access the LinkRunner G2 testing application settings, touch the menu icon at the top left of
the LinkRunner G2 application screen. -
Sign Up/Sign In
a) To get started with Link-Live, create a user account at Link-Live.com.
b) Follow the instructions in the activation email you receive from Link-Live.
c) Then, sign in.
-
Claim to Link-Live
a) The first time you sign in to Link-Live, a pop-up window appears prompting you to claim a device. If you already have units claimed in Link-Live, navigate to the Units page from the left side navigation menu, and click the Claim Unit button at the lower right corner.
b) Select your device (LinkRunner G2), and follow the on-screen instructions to finish claiming.
c) For more information on using Link-Live, open Support from the left side menu.
Register your product at NetAlly.com/
Registration to receive update information
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>