Godox TP-P600 Power Box for TP and TL Series Tube Light Instruction Manual
- June 9, 2024
- Godox
Table of Contents
Godox TP-P600 Power Box for TP and TL Series Tube Light
Foreword
Thank you for purchasing
Power Box TP-P600 is powered by AC 100V-240V~50/60Hz power source and can be
used for charging maximum 8 tube lights with input voltage of 20V When used as
a single-port power supply, it can only collocate with luminaire below 105W.
When used as a multi-port power supply, it can only collocate with luminaires
below 600W in total.
Compatible Godox Light Models
- RGB Tube Light TL60/TL 120/TL 180
- KN OWLED RGBWW Pixel Tube Light TP2R/TP4R
Warning
-
Always keep this product dry1
-
Please power on the device after connecting it to a power source.
-
Do not leave or store the product if the ambient temperature reads over 40″C
-
Do not leave the product in the presence of flammable gas. In certain circumstances, please pay attention to the relevant warning.
-
Please carefully read and observe the warning or directions offered
by the manufacturer. -
Changes made to the specifications or designs may not be reflected in this manual.
Name of Parts
- DC Dutput Port 1
- DC Output Port 2
- DC Output Port 3
- DC Output Port 4
- DC Output Port 5
- DC Output Port 6
- DC Output Port 7
- DC Output Port 8
- Handle
- Warning Sticker
- Fan Outlet
- Power Switch Button
- AC Input Port
- Hanging Device
- Power Source Indicator
What’s Inside
Operation Instruction
- Connect the light body with the DC cable first.
- Connect to AC power source with power cable.
- Then turn on the device after steps 7&2.
Technical Data
- Power Box Model TP-P600
- Input Parameter AC 100V-240V~50/60Hz 9A(Max.)
- Output Parameter 21V 600W(Max.)
- Single-port Rated Output Current 5A
- Working Environment Temperature 10C-+40C
- Dimension 165mm 305mm 93mm
- Net Weight 3.6kg
Declaration of Conformity
GODOX Photo Equipment Co., Ltd. hereby declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/35/EU,2014/30/EU. They are allowed to be used in all EU member
states For more information of DoC, Please click this web link:
https://www.godox.com/DOC/Godox_TP-P600_DOC.pdf.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures·
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/n/technician for help
Warranty
Dear customers, as this warranty card is an important certificate to apply for
our maintenance service, please fill in the following form in coordination
with the seller and safe-keep it. Thank you.
Applicable Products
The document applies to the products listed on the Product Maintenance
Information (see below for further information). Other products or accessories
(e.g. promotional items, giveaways and additional accessories attached, etc.)
are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories is implemented according to
the relevant Product Maintenance Information. The warranty period is
calculated from the day(purchase date) when the product is bought for the
first time, And the purchase date is considered as the date registered on the
warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product
distributor or authorized service institutions. You can also contact the God
ox after-sale service call and we will offer you service. When applying for
maintenance service, you should provide valid warranty card. If you cannot
provide valid warranty card, we may offer you maintenance service once
confirmed that the product or accessory is involved in the maintenance scope,
but that shall not be considered as our obligation
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has expired its warranty period;
- Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition and detachment;
- The original identifying information of the product or accessory is modified, alternated, or removed;
- No valid warranty card;
- Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
- Breakage or damage caused by force majeure or accident;
- Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
GODOX Photo Equipment Co., Ltd.
Add.: Building Z Yaochuan Industrial Zone, Tangwei Community, Fuhai Street,
Bao’an District Shenzhen 518103, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
We-chat Official Account