solar-powered Solar Light User Manual
- June 7, 2024
- solar-powered
Table of Contents
Product Overview
Solar light is an electric lamp that converts light energy into electricity by solar panels. The advantage of the product is no wiring, easy to installation and without electricity. In the day, the solar panel absorbs the sun’s light and convert to electricity, and store in batteries. At night, the light will turn on automatically.
Operating Manual
(Camera Edition)
Operating Instruction
Packing List
| 1. Lamp Cap | 2.Solar Panel | 3. Remote control |
|---|---|---|
| 4. Installing Support | 5. Screws | 6.Operating Manual |
Installing
Light Control Detection
Then, tightening the waterproof wire and placing the solar panel towards the sunlight, the light will turn off automatically and the charging indicator will flash regularly. It means the light control function is working well.
(Please tighten the wire by the direction of the arrow)
Key Instructions of Remote Control
Tightening the waterproof wire and pressing the key “AUTO°, the light will automatically turn on for 4 hours in the dark. After 4 hours of light-operated mode, it will switch to radar mode. (The remote control has a memory function, you can set it only once)
Remote-control.The specific functions are shown below.
Important Notification
- Please do not accept 220V ac to avoid damaging the solar lamp.
- Please ensure the installation is stable to avoid hurting others.
- Please do not disassemble the lamp to avoid affecting the warranty
- Please clean the dust on the solar panel surface every 3 months to avoid affecting the power generation efficiency.
Monitor Configure Network
ONE Connect WIFI
Connect WIFI with your mobile phone, and make sure the network signal is
good. (Tips Please make sure the lamp, cellphone, and WIFI router are
within 3 meters doting configuring the network.
TWO: Download APP
Scan OR code at right to get APP, or search’ Tuyamert in App Store.
(Dips: available for Android and ISO)
THREE: Register APP Please use the cellphone number or email address to register an account in Tuya’ APP.
https://smartapp.tuya.com/tuyasmart
FOUR: Tum on the monitor switch
Monitor Configure Network
FIVE: Add Device
Open the APP and follow the steps below
Installing
Fix the product on the wall with expansion screws. The installation height is suggested to be 3-5 meters.
Make sure the solar panels are installed at the correct angle and it will not
be blocked by obstacles.
Tips:
- The installation direction of the solar panel is 5-10 degrees south to west, with an angle of 35 degrees with the horizontal place.
- Please install the solar panel in the sun direction to avoid affecting the power generation efficiency.
- Please ensure the installation is stable.
Functional Specifications
Extensive Functions
Change username. When changes the username, you should remove the device in
settings. After successfully being removed, you can use another username to
log in.
Share devise. When shares devices to others, the shared user should register an account in the “Tuya” APP. The master user can add the account of the shared user in settings.
Important Notification
Storage settings. Recording mode includes “event recording” and “non-stop’ . You can select different modes according to your needs. It is suggested to select “event recording” mode because it can save electricity.
Motion detection alarm. You can select low. medium or high sensitivity according to your needs. Checking motion detection alarm information, please click “Me” on the main page, then click “message center” and °Alarm”.
Important Notification
- If changing new WIFI to configure the network, please click Reset camera by remote control.
- At night, the monitor needs to fill in the light during working, it is recommended not to turn off the light.
- During configuring the network, please make sure the Win signal is good and the WIFI password is entered correctly. When the WIFI signal is weak, the device may be disconnected. At this time, Please remotely restart the camera switch or move the device to an area with a good WIFI signal for installation.
- In order to ensure charging efficiency, the optimal installation direction of the solar panel is 5-10 degrees south to west, with an angle of 30 degrees with the horizontal place. Please install in an unsheltered place.
- Generating capacity of solar light depends on sunlight In the day. If it is cloudy and rainy, it is recommended to use the remote control to reduce the brightness of the lights to extend the endurance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>