LTE-M Wireless I/O Module User Manual

Advantech WISE-4671 Wireless I/O Module User Manual

Introduction

NB-IoT and LTE Cat M1 are new wireless technologies included in the 5G evolution of cellular technology standards defined by the 3rd Generation Partnership Project (3GPP). NB-IoT and LTE Cat M1 feature low power consumption and utilize LTE networks based on licensed spectrum bands. These technologies are optimized for connectivity to machines, assets and sensors in order to enable IoT applications such as smart cities, smart agriculture and remote asset management.

WISE-4671 series is a cellular based IoT wireless sensor node compliant with LTE Cat. NB1 and Cat. M1 with external for flexible installation. In addition to offering various I/O types, WISE-4671 series provides a data logger and direct cloud connectivity so that data can be published to the cloud by messaging protocol such as MQTT, CoAP, LwM2M with secure socket supported.

Features

• Global coverage of Cat. NB1 and Cat. M1 frequency bands
• Application-ready I/O combination with optional IP65 I/O
• Wide voltage power input with 10 ~ 50VDC
• Data buffered function with time stamp prevents data loss
• Fast and easy deployment to reduce operation cost
• Supports direct cloud service for IoT integration
• Support MQTT, CoAP & LwM2M protocol
• GPS/Galileo/BeiDou/GLONASS support

Automatic Connection with Cloud

By utilizing leading IoT messaging protocols such as MQTT and CoAP, WISE-4671 series easily integrates with popular cloud services, reducing setup complexity and accelerating implementation.

Open Connectivity for Cloud and System

WISE-4671 series support CoAP and MQTT communication protocols while continually integrating mainstream cloud services to simplify the complexity of data integration.

Legacy and Existing Devices to NB-IoT/LTE-M

WISE-4671 series offer digital I/O, 4~20-mA analog and RS-232/485 interfaces for various applications, quickly providing NB-IoT/LTE-M network functions to existing devices and assets.

Upgrade Legacy Equipment though Cloud Management

WISE-4671 series NB-IoT/LTE-M sensor nodes are suitable for data collection from widely distributed assets. No complicated programming, setup, or registration are required for a fast introduction into IoT applications such as smart cities, smart water/electricity meters, and remote facility management.

Device to Cloud System Architecture

WISE-4671 series wireless sensor nodes support the open communication protocols MQTT, CoAP, and LwM2M. Users can transmit data to specific public cloud services or existing private cloud platforms by publish/subscribe or push.

Specification

Wireless Communication

• 3GPP Standards R.13, Cat. NB1/ Cat. M1
• Frequency Band B2, B3, B4, B8, B12, B13, B20, B28
• Antenna Type External

GPS

• GNSS Systems GPS, GLONASS, Galileo, BeiDou and QZSS signals
• Max. Update Rate Every 15 seconds
• Accuracy Position: 2.5 m Typ.
• Acquisition Cold starts: 31s Typ.
• Antenna Type Internal

General

• Power Input

  • Built-in 4100mAh Lithium rechargeable battery pack 10~50VDC
  • external power
  • 17-21VDC Solar Panel

• Power Consumption
  Non-battery Charging: 1.4W @ 12VDC
  When Battery Charging: 11W @ 24VDC

• Configuration Interface Micro-B USB

• SIM 4FF/Nano SIM

• Connector
  Power: M12 4-pin code-A male x 1
  I/O: M12 8-pin code-A female x 2

• LED Indicator Status, Error, Tx, Rx, Signal Level, Battery Level

• Mounting DIN 35 rail, wall, and pole

• Dimension (W x H x D) 82 x 122 x 49 mm (without antenna)

• Certification CE, FCC, PTCRB, AT&T, Verizon

Operating Temperature

• With rechargeable battery 0 ~ 60 °C (32 ~ 140 °F)
• Without battery -25 ~ 70 °C (-13 ~ 158 °F)

Storage Temperature

• With rechargeable battery -20 ~ 60 °C (-4 ~ 140 °F)
• Without battery -40 ~ 85 °C (-40 ~ 185 °F)
• Operating Humidity 5 ~ 95% RH (non-condensing)
• Storage Humidity 0 ~ 95% RH (non-condensing)

WISE-S614(4AI/4DI)

Analog Input

• Channels 4

• Resolution 16-bit

• Sampling Rate 1Hz per channel

• Accuracy
  ±0.1% of FSR (Voltage)
  ±0.2% of FSR (Current)

• Input Range
  ±150mV, ±500mV, ±1 V, ±5V, ±10V,
  0 ~ 150mV, 0 ~ 500mV, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA,
  4 ~ 20mA , ±20mA

• Input Impedance
  > 2M Ω (Voltage)
  240 Ω (External resistor for current)

• Isolation Voltage 2000 VDC

• Common Mode Voltage 350 VDC

• Drift
  Unipolar ±100ppm
  Bipolar ±50ppm

• Burn-out Detection Yes (4~20mA only)

• Supports Data Scaling and Averaging

Digital Input

• Channels 4

• Input Type Dry Contact (Wet Contact by request)

• Logic Level
  0: Open
  1: Close to DI COM

• Supports 200Hz Counter Input (32-bit + 1-bit overflow)

• Keep/Discard Counter Value when Power-off

• Supports Inverted DI Status

WISE-S615 (4 RTD)

Analog Input

• Channels 4 differential

• Input Connections 2, 3-wire

• Input Impedance 10 MΩ

• Resolution 15 bits

• Sampling Rate 1 Sample/s (MAX)

• RTD Types and Temperature Ranges
  Pt 100 RTD
  RTD 100 (a = 0.00385) -200°C to 600°C
  RTD 100 (a = 0.00392) -200°C to 600°C
  Pt 1000 RTD
  Pt -40°C to 160°C

• Accuracy ±0.1% FSR

• CMR @ 50/60 Hz 90 dB

• NMR @ 50/60 Hz 60 dB

• Span Drift ± 25 ppm/°C

WISE-S617 (2AI/2DI/1DO/1RS-485)

Digital Input

• Channel 2

• Logic Level 0: Open
  (Dry Contact) 1: Close to DI COM

• Non-isolation

• Supports 32-bit counter input function (maximum signal frequency: 200 Hz)

• Supports keep/discard counter value when power OFF

• Supports frequency input function (maximum signal frequency: 200 Hz)

• Supports inverted digital input status

Analog Input

• Channels 2

• Resolution 16 bit

• Sampling Rate 1 Hz per channel

• Accuracy
  ±0.1% of FSR (Voltage)
  ±0.2% of FSR (Current)

• Input Range
  ±1 V, ±5V, ±10V, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA,
  4 ~ 20mA, ±20mA

• Input Impedance
  > 2M Ω (Voltage)
  120 Ω (External Resistor for Current)

• Isolation Voltage 2000 VRMS

• Common Mode Voltage 350 VDC

• Drift
  Unipolar ±100ppm
  Bipolar ±50ppm

• Burn-Out Detection Yes (4 ~ 20mA only)

• Supports data scaling and averaging

Digital Output

• Channel 1 (Sink Type)
• Non-isolation
• Output Current 100mA

COM Port

• Port Type RS-485
• Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
• Data Bits 7, 8
• Stop Bits 1, 2
• Parity None, Odd, Even
• Flow Control Auto flow control
• Signals DATA+ and DATA-
• Protection 15 kV ESD
• Supported Protocols Modbus/RTU (Up to 32 addresses with a maximum of 8 instructions)

WISE-S672 (6DI/1RS-485/1RS-485 or RS-232)

COM Port

• Port Number 2
• Type COM1: RS-485 COM1: RS-485/232
• Serial Signal RS-485: DATA+, DATARS-232: Tx, Rx, GND
• Data Bits 7, 8
• Stop Bits 1, 2
• Parity None, Odd, Even
• Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
• Protection 15 kV ESD
• Protocol Modbus/RTU (Total 32 address)

Digital Input

• Channels 6

• Input Type Dry Contact

• Logic Level
  0: Open
  1: Close to DI COM

• Supports 200Hz Counter Input (32-bit + 1-bit overflow)

• Keep/Discard Counter Value when Power-off

• Supports Inverted DI Status

Ordering Information

Advanced Industrial Cat. NB1/Cat. M1 Module

• WISE-4671-UA Advanced Industrial Cat. NB1/ Cat. M1 Wireless Module

WISE-S600 IP65 I/O Module with M12 Connectors

• WISE-S614-A 4AI/4DI
• WISE-S615-A 4RTD
• WISE-S617-A 2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output
• WISE-S672-A 6DI/1RS-485/1RS-485 or RS-232

WISE-S600T I/O Module with Terminal Block

• WISE-S614T-A 4AI/4DI
• WISE-S617T-A 2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output

Accessories

• 1654011516-01 M12, A-code, 8 Pin, Male
• 1655005903-01 M12, A-code, 4 Pin, Female
• 1700028162-01 M12, A-code, 4 pin, Female with 1M cable
• 1700028163-01 M12, A-code, 8 Pin, Male with 1M cable
• PWR-242-AE DIN Rail Power Supply (2.1A Output Current)
• PWR-243-AE Panel Mount Power Supply (3A Output Current)
• PWR-244-AE Panel Mount Power Supply (4.2A Output Current)

Pin Assignment

Dimensions

Unit: mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>